Merge pull request #537 from billz/armbian-buster

Extend installer to Debian-based distros
This commit is contained in:
Bill Zimmerman 2020-03-29 22:40:49 +02:00 committed by GitHub
commit b922f380ba
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
10 changed files with 420 additions and 330 deletions

View file

@ -9,7 +9,7 @@ define('RASPI_CACHE_PATH', sys_get_temp_dir() . '/raspap');
// Constants for configuration file paths.
// These are typical for default RPi installs. Modify if needed.
define('RASPI_DNSMASQ_CONFIG', '/etc/dnsmasq.conf');
define('RASPI_DNSMASQ_CONFIG', '/etc/dnsmasq.d/090_raspap.conf');
define('RASPI_DNSMASQ_LEASES', '/var/lib/misc/dnsmasq.leases');
define('RASPI_HOSTAPD_CONFIG', '/etc/hostapd/hostapd.conf');
define('RASPI_DHCPCD_CONFIG', '/etc/dhcpcd.conf');

View file

@ -13,7 +13,7 @@ $defaults = [
// Constants for configuration file paths.
// These are typical for default RPi installs. Modify if needed.
'RASPI_DNSMASQ_CONFIG' => '/etc/dnsmasq.conf',
'RASPI_DNSMASQ_CONFIG' => '/etc/dnsmasq.d/090_raspap.conf',
'RASPI_DNSMASQ_LEASES' => '/var/lib/misc/dnsmasq.leases',
'RASPI_HOSTAPD_CONFIG' => '/etc/hostapd/hostapd.conf',
'RASPI_DHCPCD_CONFIG' => '/etc/dhcpcd.conf',

View file

@ -1,54 +1,48 @@
#!/bin/bash
#
# RaspAP installation functions.
# author: @billz
# license: GNU General Public License v3.0
# RaspAP installation functions
# Author: @billz <billzimmerman@gmail.com>
# License: GNU General Public License v3.0
#
# You are not obligated to bundle the LICENSE file with your RaspAP projects as long
# as you leave these references intact in the header comments of your source files.
raspap_dir="/etc/raspap"
raspap_user="www-data"
# Exit on error
set -o errexit
# Exit on error inside functions
set -o errtrace
# Turn on traces, disabled by default
# set -o xtrace
# Set defaults
readonly raspap_dir="/etc/raspap"
readonly raspap_user="www-data"
readonly raspap_sudoers="/etc/sudoers.d/090_raspap"
readonly raspap_dnsmasq="/etc/dnsmasq.d/090_raspap.conf"
readonly raspap_sysctl="/etc/sysctl.d/90_raspap.conf"
readonly rulesv4="/etc/iptables/rules.v4"
webroot_dir="/var/www/html"
version=`sed 's/\..*//' /etc/debian_version`
git_source_url="https://github.com/$repo" # $repo from install.raspap.com
# Determine Raspbian version, set default home location for lighttpd and
# php package to install
if [ "$version" -eq "10" ]; then
version_msg="Raspbian 10.0 (Buster)"
php_package="php7.3-cgi"
elif [ "$version" -eq "9" ]; then
version_msg="Raspbian 9.0 (Stretch)"
php_package="php7.0-cgi"
elif [ "$version" -eq "8" ]; then
install_error "Raspbian 8.0 (Jessie) and php5 are deprecated. Please upgrade."
elif [ "$version" -lt "8" ]; then
install_error "Raspbian ${version} is unsupported. Please upgrade."
fi
# NOTE: all the below functions are overloadable for system-specific installs
phpcgiconf=""
if [ "$php_package" = "php7.3-cgi" ]; then
phpcgiconf="/etc/php/7.3/cgi/php.ini"
elif [ "$php_package" = "php7.0-cgi" ]; then
phpcgiconf="/etc/php/7.0/cgi/php.ini"
fi
### NOTE: all the below functions are overloadable for system-specific installs
# Prompts user to set options for installation
function config_installation() {
install_log "Configure installation"
echo "Detected ${version_msg}"
# Prompts user to set installation options
function _config_installation() {
_install_log "Configure installation"
_get_linux_distro
echo "Detected OS: ${DESC}"
echo "Using GitHub repository: ${repo} ${branch} branch"
echo "Install directory: ${raspap_dir}"
echo -n "Install to Lighttpd root directory: ${webroot_dir}? [Y/n]: "
echo -n "Install to lighttpd root: ${webroot_dir}? [Y/n]: "
if [ "$assume_yes" == 0 ]; then
read answer < /dev/tty
if [ "$answer" != "${answer#[Nn]}" ]; then
read -e -p < /dev/tty "Enter alternate Lighttpd directory: " -i "/var/www/html" webroot_dir
read -e -p < /dev/tty "Enter alternate lighttpd directory: " -i "/var/www/html" webroot_dir
fi
else
echo -e
fi
echo "Install to Lighttpd directory: ${webroot_dir}"
echo "Installing to lighttpd directory: ${webroot_dir}"
echo -n "Complete installation with these values? [Y/n]: "
if [ "$assume_yes" == 0 ]; then
read answer < /dev/tty
@ -61,132 +55,182 @@ function config_installation() {
fi
}
# Determines host Linux distrubtion details
function _get_linux_distro() {
if type lsb_release >/dev/null 2>&1; then # linuxbase.org
OS=$(lsb_release -si)
RELEASE=$(lsb_release -sr)
CODENAME=$(lsb_release -sc)
DESC=$(lsb_release -sd)
elif [ -f /etc/os-release ]; then # freedesktop.org
. /etc/os-release
OS=$ID
RELEASE=$VERSION_ID
CODENAME=$VERSION_CODENAME
DESC=$PRETTY_NAME
else
_install_error "Unsupported Linux distribution"
fi
}
# Sets php package option based on Linux version, abort if unsupported distro
function _set_php_package() {
case $RELEASE in
"18.04"|"19.10") # Ubuntu Server
php_package="php7.4-cgi"
phpcgiconf="/etc/php/7.4/cgi/php.ini" ;;
"10")
php_package="php7.3-cgi"
phpcgiconf="/etc/php/7.3/cgi/php.ini" ;;
"9")
php_package="php7.0-cgi"
phpcgiconf="/etc/php/7.0/cgi/php.ini" ;;
"8")
_install_error "${DESC} and php5 are not supported. Please upgrade." ;;
*)
_install_error "${DESC} is unsupported. Please install on a supported distro." ;;
esac
}
# Runs a system software update to make sure we're using all fresh packages
function install_dependencies() {
install_log "Installing required packages"
sudo apt-get install $apt_option lighttpd $php_package git hostapd dnsmasq vnstat qrencode || install_error "Unable to install dependencies"
function _install_dependencies() {
_install_log "Installing required packages"
_set_php_package
if [ "$php_package" = "php7.4-cgi" ]; then
echo "Adding apt-repository ppa:ondrej/php"
sudo apt-get install software-properties-common || _install_error "Unable to install dependency"
sudo add-apt-repository ppa:ondrej/php || _install_error "Unable to add-apt-repository ppa:ondrej/php"
fi
if [ ${OS,,} = "debian" ] || [ ${OS,,} = "ubuntu" ]; then
dhcpcd_package="dhcpcd5"
fi
# Set dconf-set-selections
echo iptables-persistent iptables-persistent/autosave_v4 boolean true | sudo debconf-set-selections
echo iptables-persistent iptables-persistent/autosave_v6 boolean true | sudo debconf-set-selections
sudo apt-get install $apt_option lighttpd git hostapd dnsmasq iptables-persistent $php_package $dhcpcd_package vnstat qrencode || _install_error "Unable to install dependencies"
}
# Enables PHP for lighttpd and restarts service for settings to take effect
function enable_php_lighttpd() {
install_log "Enabling PHP for lighttpd"
function _enable_php_lighttpd() {
_install_log "Enabling PHP for lighttpd"
sudo lighttpd-enable-mod fastcgi-php
sudo service lighttpd force-reload
sudo systemctl restart lighttpd.service || install_error "Unable to restart lighttpd"
sudo systemctl restart lighttpd.service || _install_error "Unable to restart lighttpd"
}
# Verifies existence and permissions of RaspAP directory
function create_raspap_directories() {
install_log "Creating RaspAP directories"
function _create_raspap_directories() {
_install_log "Creating RaspAP directories"
if [ -d "$raspap_dir" ]; then
sudo mv $raspap_dir "$raspap_dir.`date +%F-%R`" || install_error "Unable to move old '$raspap_dir' out of the way"
sudo mv $raspap_dir "$raspap_dir.`date +%F-%R`" || _install_error "Unable to move old '$raspap_dir' out of the way"
fi
sudo mkdir -p "$raspap_dir" || install_error "Unable to create directory '$raspap_dir'"
sudo mkdir -p "$raspap_dir" || _install_error "Unable to create directory '$raspap_dir'"
# Create a directory for existing file backups.
sudo mkdir -p "$raspap_dir/backups"
# Create a directory to store networking configs
echo "Creating $raspap_dir/networking"
sudo mkdir -p "$raspap_dir/networking"
# Copy existing dhcpcd.conf to use as base config
cat /etc/dhcpcd.conf | sudo tee -a /etc/raspap/networking/defaults
sudo chown -R $raspap_user:$raspap_user "$raspap_dir" || install_error "Unable to change file ownership for '$raspap_dir'"
echo "Adding /etc/dhcpcd.conf as base configuration"
cat /etc/dhcpcd.conf | sudo tee -a /etc/raspap/networking/defaults > /dev/null
echo "Changing file ownership of $raspap_dir"
sudo chown -R $raspap_user:$raspap_user "$raspap_dir" || _install_error "Unable to change file ownership for '$raspap_dir'"
}
# Generate hostapd logging and service control scripts
function create_hostapd_scripts() {
install_log "Creating hostapd logging & control scripts"
sudo mkdir $raspap_dir/hostapd || install_error "Unable to create directory '$raspap_dir/hostapd'"
function _create_hostapd_scripts() {
_install_log "Creating hostapd logging & control scripts"
sudo mkdir $raspap_dir/hostapd || _install_error "Unable to create directory '$raspap_dir/hostapd'"
# Move logging shell scripts
sudo cp "$webroot_dir/installers/"*log.sh "$raspap_dir/hostapd" || install_error "Unable to move logging scripts"
sudo cp "$webroot_dir/installers/"*log.sh "$raspap_dir/hostapd" || _install_error "Unable to move logging scripts"
# Move service control shell scripts
sudo cp "$webroot_dir/installers/"service*.sh "$raspap_dir/hostapd" || install_error "Unable to move service control scripts"
sudo cp "$webroot_dir/installers/"service*.sh "$raspap_dir/hostapd" || _install_error "Unable to move service control scripts"
# Make enablelog.sh and disablelog.sh not writable by www-data group.
sudo chown -c root:"$raspap_user" "$raspap_dir/hostapd/"*.sh || install_error "Unable change owner and/or group"
sudo chmod 750 "$raspap_dir/hostapd/"*.sh || install_error "Unable to change file permissions"
sudo chown -c root:"$raspap_user" "$raspap_dir/hostapd/"*.sh || _install_error "Unable change owner and/or group"
sudo chmod 750 "$raspap_dir/hostapd/"*.sh || _install_error "Unable to change file permissions"
}
# Generate lighttpd service control scripts
function create_lighttpd_scripts() {
install_log "Creating lighttpd control scripts"
sudo mkdir $raspap_dir/lighttpd || install_error "Unable to create directory '$raspap_dir/lighttpd"
function _create_lighttpd_scripts() {
_install_log "Creating lighttpd control scripts"
sudo mkdir $raspap_dir/lighttpd || _install_error "Unable to create directory '$raspap_dir/lighttpd"
# Move service control shell scripts
sudo cp "$webroot_dir/installers/"configport.sh "$raspap_dir/lighttpd" || install_error "Unable to move service control scripts"
sudo cp "$webroot_dir/installers/"configport.sh "$raspap_dir/lighttpd" || _install_error "Unable to move service control scripts"
# Make configport.sh writable by www-data group
sudo chown -c root:"$raspap_user" "$raspap_dir/lighttpd/"*.sh || install_error "Unable change owner and/or group"
sudo chmod 750 "$raspap_dir/lighttpd/"*.sh || install_error "Unable to change file permissions"
sudo chown -c root:"$raspap_user" "$raspap_dir/lighttpd/"*.sh || _install_error "Unable change owner and/or group"
sudo chmod 750 "$raspap_dir/lighttpd/"*.sh || _install_error "Unable to change file permissions"
}
# Prompt to install openvpn
function prompt_install_openvpn() {
install_log "Setting up OpenVPN support (beta)"
function _prompt_install_openvpn() {
_install_log "Setting up OpenVPN support"
echo -n "Install OpenVPN and enable client configuration? [Y/n]: "
if [ "$assume_yes" == 0 ]; then
read answer < /dev/tty
if [ "$answer" != "${answer#[Nn]}" ]; then
echo -e
else
install_openvpn
_install_openvpn
fi
elif [ "$ovpn_option" == 1 ]; then
install_openvpn
_install_openvpn
fi
}
# Install openvpn and enable client configuration option
function install_openvpn() {
install_log "Installing OpenVPN and enabling client configuration"
sudo apt-get install -y openvpn || install_error "Unable to install openvpn"
sudo sed -i "s/\('RASPI_OPENVPN_ENABLED', \)false/\1true/g" "$webroot_dir/includes/config.php" || install_error "Unable to modify config.php"
function _install_openvpn() {
_install_log "Installing OpenVPN and enabling client configuration"
sudo apt-get install -y openvpn || _install_error "Unable to install openvpn"
sudo sed -i "s/\('RASPI_OPENVPN_ENABLED', \)false/\1true/g" "$webroot_dir/includes/config.php" || _install_error "Unable to modify config.php"
echo "Enabling openvpn-client service on boot"
sudo systemctl enable openvpn-client@client || install_error "Unable to enable openvpn-client daemon"
create_openvpn_scripts || install_error "Unable to create openvpn control scripts"
sudo systemctl enable openvpn-client@client || _install_error "Unable to enable openvpn-client daemon"
_create_openvpn_scripts || _install_error "Unable to create openvpn control scripts"
}
# Generate openvpn logging and auth control scripts
function create_openvpn_scripts() {
install_log "Creating OpenVPN control scripts"
sudo mkdir $raspap_dir/openvpn || install_error "Unable to create directory '$raspap_dir/openvpn'"
function _create_openvpn_scripts() {
_install_log "Creating OpenVPN control scripts"
sudo mkdir $raspap_dir/openvpn || _install_error "Unable to create directory '$raspap_dir/openvpn'"
# Move service auth control shell scripts
sudo cp "$webroot_dir/installers/"configauth.sh "$raspap_dir/openvpn" || install_error "Unable to move auth control script"
sudo cp "$webroot_dir/installers/"configauth.sh "$raspap_dir/openvpn" || _install_error "Unable to move auth control script"
# Make configauth.sh writable by www-data group
sudo chown -c root:"$raspap_user" "$raspap_dir/openvpn/"*.sh || install_error "Unable change owner and/or group"
sudo chmod 750 "$raspap_dir/openvpn/"*.sh || install_error "Unable to change file permissions"
sudo chown -c root:"$raspap_user" "$raspap_dir/openvpn/"*.sh || _install_error "Unable change owner and/or group"
sudo chmod 750 "$raspap_dir/openvpn/"*.sh || _install_error "Unable to change file permissions"
}
# Fetches latest files from github to webroot
function download_latest_files() {
function _download_latest_files() {
if [ ! -d "$webroot_dir" ]; then
sudo mkdir -p $webroot_dir || install_error "Unable to create new webroot directory"
sudo mkdir -p $webroot_dir || _install_error "Unable to create new webroot directory"
fi
if [ -d "$webroot_dir" ]; then
sudo mv $webroot_dir "$webroot_dir.`date +%F-%R`" || install_error "Unable to remove old webroot directory"
sudo mv $webroot_dir "$webroot_dir.`date +%F-%R`" || _install_error "Unable to remove old webroot directory"
fi
install_log "Cloning latest files from github"
git clone --branch $branch --depth 1 $git_source_url /tmp/raspap-webgui || install_error "Unable to download files from github"
_install_log "Cloning latest files from github"
git clone --branch $branch --depth 1 $git_source_url /tmp/raspap-webgui || _install_error "Unable to download files from github"
sudo mv /tmp/raspap-webgui $webroot_dir || install_error "Unable to move raspap-webgui to web root"
sudo mv /tmp/raspap-webgui $webroot_dir || _install_error "Unable to move raspap-webgui to web root"
}
# Sets files ownership in web root directory
function change_file_ownership() {
function _change_file_ownership() {
if [ ! -d "$webroot_dir" ]; then
install_error "Web root directory doesn't exist"
_install_error "Web root directory doesn't exist"
fi
install_log "Changing file ownership in web root directory"
sudo chown -R $raspap_user:$raspap_user "$webroot_dir" || install_error "Unable to change file ownership for '$webroot_dir'"
_install_log "Changing file ownership in web root directory"
sudo chown -R $raspap_user:$raspap_user "$webroot_dir" || _install_error "Unable to change file ownership for '$webroot_dir'"
}
# Check for existing /etc/network/interfaces and /etc/hostapd/hostapd.conf files
function check_for_old_configs() {
# Check for existing configuration files
function _check_for_old_configs() {
if [ -f /etc/network/interfaces ]; then
sudo cp /etc/network/interfaces "$raspap_dir/backups/interfaces.`date +%F-%R`"
sudo ln -sf "$raspap_dir/backups/interfaces.`date +%F-%R`" "$raspap_dir/backups/interfaces"
@ -197,8 +241,8 @@ function check_for_old_configs() {
sudo ln -sf "$raspap_dir/backups/hostapd.conf.`date +%F-%R`" "$raspap_dir/backups/hostapd.conf"
fi
if [ -f /etc/dnsmasq.conf ]; then
sudo cp /etc/dnsmasq.conf "$raspap_dir/backups/dnsmasq.conf.`date +%F-%R`"
if [ -f $raspap_dnsmasq ]; then
sudo cp $raspap_dnsmasq "$raspap_dir/backups/dnsmasq.conf.`date +%F-%R`"
sudo ln -sf "$raspap_dir/backups/dnsmasq.conf.`date +%F-%R`" "$raspap_dir/backups/dnsmasq.conf"
fi
@ -207,11 +251,6 @@ function check_for_old_configs() {
sudo ln -sf "$raspap_dir/backups/dhcpcd.conf.`date +%F-%R`" "$raspap_dir/backups/dhcpcd.conf"
fi
if [ -f /etc/rc.local ]; then
sudo cp /etc/rc.local "$raspap_dir/backups/rc.local.`date +%F-%R`"
sudo ln -sf "$raspap_dir/backups/rc.local.`date +%F-%R`" "$raspap_dir/backups/rc.local"
fi
for file in /etc/systemd/network/raspap-*.net*; do
if [ -f "${file}" ]; then
filename=$(basename $file)
@ -222,58 +261,76 @@ function check_for_old_configs() {
}
# Move configuration file to the correct location
function move_config_file() {
function _move_config_file() {
if [ ! -d "$raspap_dir" ]; then
install_error "'$raspap_dir' directory doesn't exist"
_install_error "'$raspap_dir' directory doesn't exist"
fi
install_log "Moving configuration file to '$raspap_dir'"
sudo cp "$webroot_dir"/raspap.php "$raspap_dir" || install_error "Unable to move files to '$raspap_dir'"
sudo chown -R $raspap_user:$raspap_user "$raspap_dir" || install_error "Unable to change file ownership for '$raspap_dir'"
_install_log "Moving configuration file to '$raspap_dir'"
sudo cp "$webroot_dir"/raspap.php "$raspap_dir" || _install_error "Unable to move files to '$raspap_dir'"
sudo chown -R $raspap_user:$raspap_user "$raspap_dir" || _install_error "Unable to change file ownership for '$raspap_dir'"
}
# Set up default configuration
function default_configuration() {
install_log "Setting up hostapd"
function _default_configuration() {
_install_log "Applying default configuration to installed services"
if [ -f /etc/default/hostapd ]; then
sudo mv /etc/default/hostapd /tmp/default_hostapd.old || install_error "Unable to remove old /etc/default/hostapd file"
sudo mv /etc/default/hostapd /tmp/default_hostapd.old || _install_error "Unable to remove old /etc/default/hostapd file"
fi
sudo cp $webroot_dir/config/default_hostapd /etc/default/hostapd || install_error "Unable to move hostapd defaults file"
sudo cp $webroot_dir/config/hostapd.conf /etc/hostapd/hostapd.conf || install_error "Unable to move hostapd configuration file"
sudo cp $webroot_dir/config/dnsmasq.conf /etc/dnsmasq.conf || install_error "Unable to move dnsmasq configuration file"
sudo cp $webroot_dir/config/dhcpcd.conf /etc/dhcpcd.conf || install_error "Unable to move dhcpcd configuration file"
sudo cp $webroot_dir/config/default_hostapd /etc/default/hostapd || _install_error "Unable to move hostapd defaults file"
sudo cp $webroot_dir/config/hostapd.conf /etc/hostapd/hostapd.conf || _install_error "Unable to move hostapd configuration file"
sudo cp $webroot_dir/config/dnsmasq.conf $raspap_dnsmasq || _install_error "Unable to move dnsmasq configuration file"
sudo cp $webroot_dir/config/dhcpcd.conf /etc/dhcpcd.conf || _install_error "Unable to move dhcpcd configuration file"
[ -d /etc/dnsmasq.d ] || sudo mkdir /etc/dnsmasq.d
sudo systemctl stop systemd-networkd
sudo systemctl disable systemd-networkd
sudo cp $webroot_dir/config/raspap-bridge-br0.netdev /etc/systemd/network/raspap-bridge-br0.netdev || install_error "Unable to move br0 netdev file"
sudo cp $webroot_dir/config/raspap-br0-member-eth0.network /etc/systemd/network/raspap-br0-member-eth0.network || install_error "Unable to move br0 member file"
sudo cp $webroot_dir/config/raspap-bridge-br0.netdev /etc/systemd/network/raspap-bridge-br0.netdev || _install_error "Unable to move br0 netdev file"
sudo cp $webroot_dir/config/raspap-br0-member-eth0.network /etc/systemd/network/raspap-br0-member-eth0.network || _install_error "Unable to move br0 member file"
if [ ! -f "$webroot_dir/includes/config.php" ]; then
sudo cp "$webroot_dir/config/config.php" "$webroot_dir/includes/config.php"
fi
}
# Generate required lines for Rasp AP to place into rc.local file.
# #RASPAP is for removal script
lines=(
'echo 1 > \/proc\/sys\/net\/ipv4\/ip_forward #RASPAP'
'iptables -t nat -A POSTROUTING -j MASQUERADE #RASPAP'
'iptables -t nat -A POSTROUTING -s 192.168.50.0\/24 ! -d 192.168.50.0\/24 -j MASQUERADE #RASPAP'
# Install and enable RaspAP daemon
function _enable_raspap_daemon() {
_install_log "Enabling RaspAP daemon"
echo "Disable with: sudo systemctl disable raspapd.service"
sudo cp $webroot_dir/installers/raspapd.service /lib/systemd/system/ || _install_error "Unable to move raspap.service file"
sudo systemctl daemon-reload
sudo systemctl enable raspapd.service || _install_error "Failed to enable raspap.service"
}
# Configure IP forwarding, set IP tables rules, prompt to install RaspAP daemon
function _configure_networking() {
_install_log "Configuring networking"
echo "Enabling IP forwarding"
echo "net.ipv4.ip_forward=1" | sudo tee $raspap_sysctl > /dev/null || _install_error "Unable to set IP forwarding"
sudo sysctl -p $raspap_sysctl || _install_error "Unable to execute sysctl"
sudo /etc/init.d/procps restart || _install_error "Unable to execute procps"
echo "Checking iptables rules"
rules=(
"-A POSTROUTING -j MASQUERADE"
"-A POSTROUTING -s 192.168.50.0/24 ! -d 192.168.50.0/24 -j MASQUERADE"
)
for line in "${lines[@]}"; do
if grep "$line" /etc/rc.local > /dev/null; then
echo "$line: Line already added"
for rule in "${rules[@]}"; do
if grep -- "$rule" $rulesv4 > /dev/null; then
echo "Rule already exits: ${rule}"
else
sudo sed -i "s/^exit 0$/$line\nexit 0/" /etc/rc.local
echo "Adding line $line"
rule=$(sed -e 's/^\(-A POSTROUTING\)/-t nat \1/' <<< $rule)
echo "Adding rule: ${rule}"
sudo iptables $rule || _install_error "Unable to execute iptables"
added=true
fi
done
# Force a reload of new settings in /etc/rc.local
sudo systemctl restart rc-local.service
sudo systemctl daemon-reload
# Persist rules if added
if [ "$added" = true ]; then
echo "Persisting IP tables rules"
sudo iptables-save | sudo tee $rulesv4 > /dev/null || _install_error "Unable to execute iptables-save"
fi
# Prompt to install RaspAP daemon
echo -n "Enable RaspAP control service (Recommended)? [Y/n]: "
@ -282,106 +339,42 @@ function default_configuration() {
if [ "$answer" != "${answer#[Nn]}" ]; then
echo -e
else
enable_raspap_daemon
_enable_raspap_daemon
fi
else
echo -e
enable_raspap_daemon
_enable_raspap_daemon
fi
}
}
# Install and enable RaspAP daemon
function enable_raspap_daemon() {
install_log "Enabling RaspAP daemon"
echo "Disable with: sudo systemctl disable raspap.service"
sudo cp $webroot_dir/installers/raspap.service /lib/systemd/system/ || install_error "Unable to move raspap.service file"
sudo systemctl enable raspap.service || install_error "Failed to enable raspap.service"
}
# Add sudoers file to /etc/sudoers.d/ and set file permissions
function _patch_system_files() {
# Add a single entry to the sudoers file
function sudo_add() {
sudo bash -c "echo \"$raspap_user ALL=(ALL) NOPASSWD:$1\" | (EDITOR=\"tee -a\" visudo)" \
|| install_error "Unable to patch /etc/sudoers"
}
# Adds www-data user to the sudoers file with restrictions on what the user can execute
function patch_system_files() {
# Set commands array
cmds=(
"/sbin/ifdown"
"/sbin/ifup"
"/bin/cat /etc/wpa_supplicant/wpa_supplicant.conf"
"/bin/cat /etc/wpa_supplicant/wpa_supplicant-wlan[0-9].conf"
"/bin/cp /tmp/wifidata /etc/wpa_supplicant/wpa_supplicant.conf"
"/bin/cp /tmp/wifidata /etc/wpa_supplicant/wpa_supplicant-wlan[0-9].conf"
"/sbin/wpa_cli -i wlan[0-9] scan_results"
"/sbin/wpa_cli -i wlan[0-9] scan"
"/sbin/wpa_cli -i wlan[0-9] reconfigure"
"/sbin/wpa_cli -i wlan[0-9] select_network"
"/bin/cp /tmp/hostapddata /etc/hostapd/hostapd.conf"
"/bin/systemctl start hostapd.service"
"/bin/systemctl stop hostapd.service"
"/bin/systemctl start dnsmasq.service"
"/bin/systemctl stop dnsmasq.service"
"/bin/systemctl start openvpn-client@client"
"/bin/systemctl enable openvpn-client@client"
"/bin/systemctl stop openvpn-client@client"
"/bin/systemctl disable openvpn-client@client"
"/bin/cp /tmp/ovpnclient.ovpn /etc/openvpn/client/client.conf"
"/bin/cp /tmp/authdata /etc/openvpn/client/login.conf"
"/bin/cp /tmp/dnsmasqdata /etc/dnsmasq.conf"
"/bin/cp /tmp/dhcpddata /etc/dhcpcd.conf"
"/sbin/shutdown -h now"
"/sbin/reboot"
"/sbin/ip link set wlan[0-9] down"
"/sbin/ip link set wlan[0-9] up"
"/sbin/ip -s a f label wlan[0-9]"
"/bin/cp /etc/raspap/networking/dhcpcd.conf /etc/dhcpcd.conf"
"/etc/raspap/hostapd/enablelog.sh"
"/etc/raspap/hostapd/disablelog.sh"
"/etc/raspap/hostapd/servicestart.sh"
"/etc/raspap/lighttpd/configport.sh"
"/etc/raspap/openvpn/configauth.sh"
"/bin/chmod o+r /tmp/hostapd.log"
"/bin/chmod o+r /tmp/dnsmasq.log"
)
# Check if sudoers needs patching
if [ $(sudo grep -c $raspap_user /etc/sudoers) -ne ${#cmds[@]} ]
then
# Sudoers file has incorrect number of commands. Wiping them out.
install_log "Cleaning system sudoers file"
sudo sed -i "/$raspap_user/d" /etc/sudoers
install_log "Patching system sudoers file"
# patch /etc/sudoers file
for cmd in "${cmds[@]}"
do
sudo_add $cmd
IFS=$'\n'
done
else
install_log "Sudoers file already patched"
# Create sudoers if not present
if [ ! -f $raspap_sudoers ]; then
_install_log "Adding raspap.sudoers to ${raspap_sudoers}"
sudo cp "$webroot_dir/installers/raspap.sudoers" $raspap_sudoers || _install_error "Unable to apply raspap.sudoers to $raspap_sudoers"
sudo chmod 0440 $raspap_sudoers || _install_error "Unable to change file permissions for $raspap_sudoers"
fi
# Add symlink to prevent wpa_cli cmds from breaking with multiple wlan interfaces
install_log "Symlinked wpa_supplicant hooks for multiple wlan interfaces"
_install_log "Symlinked wpa_supplicant hooks for multiple wlan interfaces"
if [ ! -f /usr/share/dhcpcd/hooks/10-wpa_supplicant ]; then
sudo ln -s /usr/share/dhcpcd/hooks/10-wpa_supplicant /etc/dhcp/dhclient-enter-hooks.d/
fi
# Unmask and enable hostapd.service
install_log "Unmasking and enabling hostapd service"
_install_log "Unmasking and enabling hostapd service"
sudo systemctl unmask hostapd.service
sudo systemctl enable hostapd.service
}
# Optimize configuration of php-cgi.
function optimize_php() {
install_log "Optimize PHP configuration"
function _optimize_php() {
_install_log "Optimize PHP configuration"
if [ ! -f "$phpcgiconf" ]; then
install_warning "PHP configuration could not be found."
_install_warning "PHP configuration could not be found."
return
fi
@ -423,15 +416,14 @@ function optimize_php() {
if [ -f "/usr/sbin/phpenmod" ]; then
sudo phpenmod opcache
else
install_warning "phpenmod not found."
_install_warning "phpenmod not found."
fi
fi
fi
}
function install_complete() {
install_log "Installation completed!"
function _install_complete() {
_install_log "Installation completed!"
if [ "$assume_yes" == 0 ]; then
# Prompt to reboot if wired ethernet (eth0) is connected.
# With default_configuration this will create an active AP on restart.
@ -442,27 +434,28 @@ function install_complete() {
echo "Installation reboot aborted."
exit 0
fi
sudo shutdown -r now || install_error "Unable to execute shutdown"
sudo shutdown -r now || _install_error "Unable to execute shutdown"
fi
fi
}
function install_raspap() {
display_welcome
config_installation
update_system_packages
install_dependencies
enable_php_lighttpd
create_raspap_directories
optimize_php
check_for_old_configs
download_latest_files
change_file_ownership
create_hostapd_scripts
create_lighttpd_scripts
move_config_file
default_configuration
prompt_install_openvpn
patch_system_files
install_complete
function _install_raspap() {
_display_welcome
_config_installation
_update_system_packages
_install_dependencies
_enable_php_lighttpd
_create_raspap_directories
_optimize_php
_check_for_old_configs
_download_latest_files
_change_file_ownership
_create_hostapd_scripts
_create_lighttpd_scripts
_move_config_file
_default_configuration
_configure_networking
_prompt_install_openvpn
_patch_system_files
_install_complete
}

View file

@ -6,9 +6,17 @@
# @author billz
# license: GNU General Public License v3.0
# Exit on error
set -o errexit
# Exit on error inside functions
set -o errtrace
# Turn on traces, disabled by default
#set -o xtrace
file=$1
auth=$2
interface=$3
readonly rulesv4="/etc/iptables/rules.v4"
if [ "$auth" = 1 ]; then
echo "Enabling auth-user-pass in OpenVPN client.conf"
@ -22,26 +30,27 @@ if [ "$auth" = 1 ]; then
fi
fi
# Generate iptables entries to place into rc.local file.
# #RASPAP is for uninstall script
echo "Checking iptables rules for $interface"
lines=(
"iptables -t nat -A POSTROUTING -o tun0 -j MASQUERADE #RASPAP"
"iptables -A FORWARD -i tun0 -o $interface -m state --state RELATED,ESTABLISHED -j ACCEPT #RASPAP"
"iptables -A FORWARD -i wlan0 -o tun0 -j ACCEPT #RASPAP"
# Configure NAT and forwarding with iptables
echo "Checking iptables rules"
rules=(
"-A POSTROUTING -o tun0 -j MASQUERADE"
"-A FORWARD -i tun0 -o ${interface} -m state --state RELATED,ESTABLISHED -j ACCEPT"
"-A FORWARD -i wlan0 -o tun0 -j ACCEPT"
)
for line in "${lines[@]}"; do
if grep "$line" /etc/rc.local > /dev/null; then
echo "$line: Line already added"
for rule in "${rules[@]}"; do
if grep -- "$rule" $rulesv4 > /dev/null; then
echo "Rule already exits: ${rule}"
else
sudo sed -i "s/^exit 0$/$line\nexit 0/" /etc/rc.local
echo "Adding rule: $line"
rule=$(sed -e 's/^\(-A POSTROUTING\)/-t nat \1/' <<< $rule)
echo "Adding rule: ${rule}"
sudo iptables $rule
added=true
fi
done
# Force a reload of new settings in /etc/rc.local
sudo systemctl restart rc-local.service
sudo systemctl daemon-reload
if [ "$added" = true ]; then
echo "Persisting IP tables rules"
sudo iptables-save | sudo tee $rulesv4 > /dev/null
fi

View file

@ -1,19 +1,31 @@
#!/bin/bash
#
# RaspAP SSL certificate installation functions
# author: @billz
# license: GNU General Public License v3.0
# Author: @billz <billzimmerman@gmail.com>
# License: GNU General Public License v3.0
#
# You are not obligated to bundle the LICENSE file with your RaspAP projects as long
# as you leave these references intact in the header comments of your source files.
# Exit on error
set -o errexit
# Exit on error inside functions
set -o errtrace
# Turn on traces, disabled by default
# set -o xtrace
# Set defaults
certname=$HOSTNAME."local"
lighttpd_ssl="/etc/lighttpd/ssl"
lighttpd_conf="/etc/lighttpd/lighttpd.conf"
webroot_dir="/var/www/html"
mkcert_version="1.4.1"
readonly mkcert_version="1.4.1"
readonly git_source_url="https://github.com/FiloSottile/mkcert/releases/download/v${mkcert_version}"
### NOTE: all the below functions are overloadable for system-specific installs
function config_installation() {
install_log "Configure a new SSL certificate"
function _config_installation() {
_install_log "Configure a new SSL certificate"
echo "Current system hostname is $HOSTNAME"
echo -n "Create an SSL certificate for ${certname}? (Recommended) [y/N]"
if [ $assume_yes == 0 ]; then
@ -35,10 +47,10 @@ function config_installation() {
echo -e
fi
install_divider
_install_divider
echo "A new SSL certificate for: ${certname}"
echo "will be installed to lighttpd SSL directory: ${lighttpd_ssl}"
install_divider
_install_divider
echo -n "Complete installation with these values? [y/N]: "
if [ $assume_yes == 0 ]; then
read answer < /dev/tty
@ -52,43 +64,43 @@ function config_installation() {
}
# Installs pre-built mkcert binary for Arch Linux ARM
function install_mkcert() {
install_log "Fetching mkcert binary"
sudo wget -q https://github.com/FiloSottile/mkcert/releases/download/v${mkcert_version}/mkcert-v${mkcert_version}-linux-arm -O /usr/local/bin/mkcert || install_error "Unable to download mkcert"
function _install_mkcert() {
_install_log "Fetching mkcert binary"
sudo wget -q ${git_source_url}/mkcert-v${mkcert_version}-linux-arm -O /usr/local/bin/mkcert || _install_error "Unable to download mkcert"
sudo chmod +x /usr/local/bin/mkcert
install_log "Installing mkcert"
mkcert -install || install_error "Failed to install mkcert"
_install_log "Installing mkcert"
mkcert -install || _install_error "Failed to install mkcert"
}
# Generate a certificate for host
function generate_certificate() {
install_log "Generating a new certificate for $certname"
function _generate_certificate() {
_install_log "Generating a new certificate for $certname"
cd $HOME
mkcert $certname "*.${certname}.local" $certname || install_error "Failed to generate certificate for $certname"
mkcert $certname "*.${certname}.local" $certname || _install_error "Failed to generate certificate for $certname"
install_log "Combining private key and certificate"
cat $certname+2-key.pem $certname+2.pem > $certname.pem || install_error "Failed to combine key and certificate"
_install_log "Combining private key and certificate"
cat $certname+2-key.pem $certname+2.pem > $certname.pem || _install_error "Failed to combine key and certificate"
echo "OK"
}
# Create a directory for the combined .pem file in lighttpd
function create_lighttpd_dir() {
install_log "Creating SLL directory for lighttpd"
function _create_lighttpd_dir() {
_install_log "Creating SLL directory for lighttpd"
if [ ! -d "$lighttpd_ssl" ]; then
sudo mkdir -p "$lighttpd_ssl" || install_error "Failed to create lighttpd directory"
sudo mkdir -p "$lighttpd_ssl" || _install_error "Failed to create lighttpd directory"
fi
echo "OK"
install_log "Setting permissions and moving .pem file"
chmod 400 "$HOME/$certname".pem || install_error "Unable to set permissions for .pem file"
sudo mv "$HOME/$certname".pem /etc/lighttpd/ssl || install_error "Unable to move .pem file"
_install_log "Setting permissions and moving .pem file"
chmod 400 "$HOME/$certname".pem || _install_error "Unable to set permissions for .pem file"
sudo mv "$HOME/$certname".pem /etc/lighttpd/ssl || _install_error "Unable to move .pem file"
echo "OK"
}
# Generate config to enable SSL in lighttpd
function configure_lighttpd() {
install_log "Configuring lighttpd for SSL"
function _configure_lighttpd() {
_install_log "Configuring lighttpd for SSL"
lines=(
'server.modules += ("mod_openssl")'
'$SERVER["socket"] == ":443" {'
@ -110,22 +122,22 @@ function configure_lighttpd() {
}
# Copy rootCA.pem to RaspAP web root
function copy_rootca() {
install_log "Copying rootCA.pem to RaspAP web root"
sudo cp ${HOME}/.local/share/mkcert/rootCA.pem ${webroot_dir} || install_error "Unable to copy rootCA.pem to ${webroot_dir}"
function _copy_rootca() {
_install_log "Copying rootCA.pem to RaspAP web root"
sudo cp ${HOME}/.local/share/mkcert/rootCA.pem ${webroot_dir} || _install_error "Unable to copy rootCA.pem to ${webroot_dir}"
echo "OK"
}
# Restart lighttpd service
function restart_lighttpd() {
install_log "Restarting lighttpd service"
sudo systemctl restart lighttpd.service || install_error "Unable to restart lighttpd service"
function _restart_lighttpd() {
_install_log "Restarting lighttpd service"
sudo systemctl restart lighttpd.service || _install_error "Unable to restart lighttpd service"
sudo systemctl status lighttpd.service
}
function install_complete() {
install_log "SSL certificate install completed!"
install_divider
function _install_complete() {
_install_log "SSL certificate install completed!"
_install_divider
printf '%s\n' \
"Open a browser and enter the address: http://$certname/rootCA.pem" \
"Download the root certificate to your client and add it to your system keychain." \
@ -133,18 +145,18 @@ function install_complete() {
"Finally, enter the address https://$certname in your browser." \
"Enjoy an encrypted SSL connection to RaspAP 🔒" \
"For advanced options, run mkcert -help"
install_divider
_install_divider
}
function install_certificate() {
display_welcome
config_installation
install_mkcert
generate_certificate
create_lighttpd_dir
configure_lighttpd
copy_rootca
restart_lighttpd
install_complete
function _install_certificate() {
_display_welcome
_config_installation
_install_mkcert
_generate_certificate
_create_lighttpd_dir
_configure_lighttpd
_copy_rootca
_restart_lighttpd
_install_complete
}

View file

@ -1,10 +0,0 @@
[Unit]
Description=RaspAP daemon
After=multi-user.target
[Service]
Type=idle
ExecStart=/bin/bash /etc/raspap/hostapd/servicestart.sh --interface uap0 --seconds 3
[Install]
WantedBy=multi-user.target

37
installers/raspap.sudoers Normal file
View file

@ -0,0 +1,37 @@
www-data ALL=(ALL) NOPASSWD:/sbin/ifdown
www-data ALL=(ALL) NOPASSWD:/sbin/ifup
www-data ALL=(ALL) NOPASSWD:/bin/cat /etc/wpa_supplicant/wpa_supplicant.conf
www-data ALL=(ALL) NOPASSWD:/bin/cat /etc/wpa_supplicant/wpa_supplicant-wlan[0-9].conf
www-data ALL=(ALL) NOPASSWD:/bin/cp /tmp/wifidata /etc/wpa_supplicant/wpa_supplicant.conf
www-data ALL=(ALL) NOPASSWD:/bin/cp /tmp/wifidata /etc/wpa_supplicant/wpa_supplicant-wlan[0-9].conf
www-data ALL=(ALL) NOPASSWD:/sbin/wpa_cli -i wlan[0-9] scan_results
www-data ALL=(ALL) NOPASSWD:/sbin/wpa_cli -i wlan[0-9] scan
www-data ALL=(ALL) NOPASSWD:/sbin/wpa_cli -i wlan[0-9] reconfigure
www-data ALL=(ALL) NOPASSWD:/sbin/wpa_cli -i wlan[0-9] select_network
www-data ALL=(ALL) NOPASSWD:/bin/cp /tmp/hostapddata /etc/hostapd/hostapd.conf
www-data ALL=(ALL) NOPASSWD:/bin/systemctl start hostapd.service
www-data ALL=(ALL) NOPASSWD:/bin/systemctl stop hostapd.service
www-data ALL=(ALL) NOPASSWD:/bin/systemctl start dnsmasq.service
www-data ALL=(ALL) NOPASSWD:/bin/systemctl stop dnsmasq.service
www-data ALL=(ALL) NOPASSWD:/bin/systemctl start openvpn-client@client
www-data ALL=(ALL) NOPASSWD:/bin/systemctl enable openvpn-client@client
www-data ALL=(ALL) NOPASSWD:/bin/systemctl stop openvpn-client@client
www-data ALL=(ALL) NOPASSWD:/bin/systemctl disable openvpn-client@client
www-data ALL=(ALL) NOPASSWD:/bin/cp /tmp/ovpnclient.ovpn /etc/openvpn/client/client.conf
www-data ALL=(ALL) NOPASSWD:/bin/cp /tmp/authdata /etc/openvpn/client/login.conf
www-data ALL=(ALL) NOPASSWD:/bin/cp /tmp/dnsmasqdata /etc/dnsmasq.d/090_raspap.conf
www-data ALL=(ALL) NOPASSWD:/bin/cp /tmp/dhcpddata /etc/dhcpcd.conf
www-data ALL=(ALL) NOPASSWD:/sbin/shutdown -h now
www-data ALL=(ALL) NOPASSWD:/sbin/reboot
www-data ALL=(ALL) NOPASSWD:/sbin/ip link set wlan[0-9] down
www-data ALL=(ALL) NOPASSWD:/sbin/ip link set wlan[0-9] up
www-data ALL=(ALL) NOPASSWD:/sbin/ip -s a f label wlan[0-9]
www-data ALL=(ALL) NOPASSWD:/bin/cp /etc/raspap/networking/dhcpcd.conf /etc/dhcpcd.conf
www-data ALL=(ALL) NOPASSWD:/etc/raspap/hostapd/enablelog.sh
www-data ALL=(ALL) NOPASSWD:/etc/raspap/hostapd/disablelog.sh
www-data ALL=(ALL) NOPASSWD:/etc/raspap/hostapd/servicestart.sh
www-data ALL=(ALL) NOPASSWD:/etc/raspap/lighttpd/configport.sh
www-data ALL=(ALL) NOPASSWD:/etc/raspap/openvpn/configauth.sh
www-data ALL=(ALL) NOPASSWD:/bin/chmod o+r /tmp/hostapd.log
www-data ALL=(ALL) NOPASSWD:/bin/chmod o+r /tmp/dnsmasq.log

View file

@ -0,0 +1,24 @@
### BEGIN INIT INFO
# Provides: raspapd
# Required-Start: $remote_fs $syslog
# Required-Stop: $remote_fs $syslog
# Default-Start: S 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Start RaspAP daemon at boot time
# Description: Enable service provided by daemon
### END INIT INFO
# Author: BillZ <billzimmerman@gmail.com>
[Unit]
Description=RaspAP Service Daemon
DefaultDependencies=no
After=multi-user.target
[Service]
Type=oneshot
ExecStart=/bin/bash /etc/raspap/hostapd/servicestart.sh --interface uap0 --seconds 3
RemainAfterExit=no
[Install]
WantedBy=multi-user.target

View file

@ -1,8 +1,8 @@
#!/bin/bash
#
# RaspAP Quick Installer
# author: @billz
# license: GNU General Public License v3.0
# Author: @billz <billzimmerman@gmail.com>
# License: GNU General Public License v3.0
#
# Usage:
#
@ -27,13 +27,16 @@
# https://raw.githubusercontent.com/billz/raspap-webgui/master/installers/common.sh
# - or -
# https://raw.githubusercontent.com/billz/raspap-webgui/master/installers/mkcert.sh
#
# You are not obligated to bundle the LICENSE file with your RaspAP projects as long
# as you leave these references intact in the header comments of your source files.
# Set defaults
repo="billz/raspap-webgui"
branch="master"
VERSION=$(curl -s "https://api.github.com/repos/$repo/releases/latest" | grep -Po '"tag_name": "\K.*?(?=")' )
assume_yes=0
ovpn_option=1
readonly RASPAP_LATEST=$(curl -s "https://api.github.com/repos/$repo/releases/latest" | grep -Po '"tag_name": "\K.*?(?=")' )
# Define usage notes
usage=$(cat << EOF
@ -75,7 +78,7 @@ while :; do
exit 1
;;
-v|--version)
printf "RaspAP v${VERSION} - simple AP setup and wifi mangement for the RaspberryPi\n"
printf "RaspAP v${RASPAP_LATEST} - simple AP setup and wifi mangement for the RaspberryPi\n"
exit 1
;;
-*|--*)
@ -93,7 +96,7 @@ done
UPDATE_URL="https://raw.githubusercontent.com/$repo/$branch/"
# Outputs a welcome message
function display_welcome() {
function _display_welcome() {
raspberry='\033[0;35m'
green='\033[1;32m'
@ -105,35 +108,35 @@ function display_welcome() {
echo -e " 88 88 88. .88 88 88. .88 88 88 88"
echo -e " dP dP 88888P8 88888P 88Y888P 88 88 dP"
echo -e " 88"
echo -e " dP version ${VERSION}"
echo -e " dP version ${RASPAP_LATEST}"
echo -e "${green}"
echo -e "The Quick Installer will guide you through a few easy steps\n\n"
}
# Outputs a RaspAP Install log line
function install_log() {
function _install_log() {
echo -e "\033[1;32mRaspAP Install: $*\033[m"
}
# Outputs a RaspAP Install Error log line and exits with status code 1
function install_error() {
function _install_error() {
echo -e "\033[1;37;41mRaspAP Install Error: $*\033[m"
exit 1
}
# Outputs a RaspAP Warning line
function install_warning() {
function _install_warning() {
echo -e "\033[1;33mWarning: $*\033[m"
}
# Outputs a RaspAP divider
function install_divider() {
function _install_divider() {
echo -e "\033[1;32m***************************************************************$*\033[m"
}
function update_system_packages() {
install_log "Updating sources"
sudo apt-get update || install_error "Unable to update package list"
function _update_system_packages() {
_install_log "Updating sources"
sudo apt-get update || _install_error "Unable to update package list"
}
# Fetch required installer functions
@ -141,11 +144,11 @@ if [ "${install_cert:-}" = 1 ]; then
source="mkcert"
wget -q ${UPDATE_URL}installers/${source}.sh -O /tmp/raspap_${source}.sh
source /tmp/raspap_${source}.sh && rm -f /tmp/raspap_${source}.sh
install_certificate || install_error "Unable to install certificate"
_install_certificate || _install_error "Unable to install certificate"
else
source="common"
wget -q ${UPDATE_URL}installers/${source}.sh -O /tmp/raspap_${source}.sh
source /tmp/raspap_${source}.sh && rm -f /tmp/raspap_${source}.sh
install_raspap || install_error "Unable to install RaspAP"
_install_raspap || _install_error "Unable to install RaspAP"
fi

View file

@ -1,12 +1,12 @@
#!/bin/bash
# When wireless client AP mode is enabled, this script handles starting
# When wireless client AP or Bridge mode is enabled, this script handles starting
# up network services in a specific order and timing to avoid race conditions.
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
NAME=raspap
NAME=raspapd
DESC="Service control for RaspAP"
CONFIGFILE="/etc/raspap/hostapd.ini"
DAEMONPATH="/lib/systemd/system/raspap.service"
DAEMONPATH="/lib/systemd/system/raspapd.service"
OPENVPNENABLED=$(pidof openvpn | wc -l)
positional=()
@ -22,21 +22,33 @@ case $key in
;;
-s|--seconds)
seconds="$2"
shift # past argument
shift # past value
shift
shift
;;
-a|--action)
action="$2"
shift
shift
;;
esac
done
set -- "${positional[@]}"
echo "Stopping network services..."
systemctl stop openvpn-client@client
if [ $OPENVPNENABLED -eq 1 ]; then
systemctl stop openvpn-client@client
fi
systemctl stop systemd-networkd
systemctl stop hostapd.service
systemctl stop dnsmasq.service
systemctl stop dhcpcd.service
if [ -f "$DAEMONPATH" ]; then
if [ "${action}" = "stop" ]; then
echo "Services stopped. Exiting."
exit 0
fi
if [ -f "$DAEMONPATH" ] && [ ! -z "$interface" ]; then
echo "Changing RaspAP Daemon --interface to $interface"
sed -i "s/\(--interface \)[[:alnum:]]*/\1$interface/" "$DAEMONPATH"
fi
@ -49,6 +61,9 @@ if [ -r "$CONFIGFILE" ]; then
if [ "${config[BridgedEnable]}" = 1 ]; then
if [ "${interface}" = "br0" ]; then
echo "Stopping systemd-networkd"
systemctl stop systemd-networkd
echo "Restarting eth0 interface..."
ip link set down eth0
ip link set up eth0
@ -64,14 +79,21 @@ if [ -r "$CONFIGFILE" ]; then
echo "Disabling systemd-networkd"
systemctl disable systemd-networkd
echo "Removing br0 interface..."
ip link set down br0
ip link del dev br0
ip link ls up | grep -q 'br0' &> /dev/null
if [ $? == 0 ]; then
echo "Removing br0 interface..."
ip link set down br0
ip link del dev br0
fi
if [ "${config[WifiAPEnable]}" = 1 ]; then
if [ "${interface}" = "uap0" ]; then
echo "Removing uap0 interface..."
iw dev uap0 del
ip link ls up | grep -q 'uap0' &> /dev/null
if [ $? == 0 ]; then
echo "Removing uap0 interface..."
iw dev uap0 del
fi
echo "Adding uap0 interface to ${config[WifiManaged]}"
iw dev ${config[WifiManaged]} interface add uap0 type __ap