Merge pull request #43 from RaspAP/feature/zbchristian-clients-mods

Feature/zbchristian clients mods
This commit is contained in:
Bill Zimmerman 2021-07-05 10:07:51 +02:00 committed by GitHub
commit 4d4fac2a8f
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
14 changed files with 750 additions and 260 deletions

View file

@ -14,19 +14,26 @@ require_once '../../includes/functions.php';
if (isset($_POST['interface'])) {
$int = $_POST['interface'];
$cfg = [];
$file = $int.".ini";
$file = $RASPI_MOBILEDATA_CONFIG;
$cfgfile="/etc/wvdial.conf";
if ( $int == "mobiledata") {
$cfg['pin'] = $_POST["pin-mobile"];
$cfg['apn'] = $_POST["apn-mobile"];
$cfg['apn_user'] = $_POST["apn-user-mobile"];
$cfg['apn_pw'] = $_POST["apn-pw-mobile"];
$cfg['router_user'] = $cfg['apn_user'] ;
$cfg['router_pw'] = $cfg['apn_pw'] ;
if (file_exists($cfgfile)) {
if($cfg["pin"] !== "") exec('sudo /bin/sed -i "s/CPIN=\".*\"/CPIN=\"'.$cfg["pin"].'\"/gi" '.$cfgfile);
if($cfg["apn"] !== "") exec('sudo /bin/sed -i "s/\"IP\"\,\".*\"/\"IP\"\,\"'.$cfg["apn"].'\"/gi" '.$cfgfile);
if($cfg["apn_user"] !== "") exec('sudo /bin/sed -i "s/^username = .*$/Username = '.$cfg["apn_user"].'/gi" '.$cfgfile);
if($cfg["apn_pw"] !== "") exec('sudo /bin/sed -i "s/^password = .*$/Password = '.$cfg["apn_pw"].'/gi" '.$cfgfile);
}
if (write_php_ini($cfg, RASPI_MOBILEDATA_CONFIG)) {
$jsonData = ['return'=>0,'output'=>['Successfully saved mobile data settings']];
} else {
$jsonData = ['return'=>1,'output'=>['Error saving mobile data settings']];
}
} else if ( preg_match("/netdevices/",$int)) {
if(!isset($_POST['opts']) ) {
$jsonData = ['return'=>0,'output'=>['No valid data to add/delete udev rule ']];
@ -75,26 +82,9 @@ if (isset($_POST['interface'])) {
if (!empty($rule)) exec('echo \''.$rule.'\' | sudo /usr/bin/tee -a '.$udevfile);
}
$jsonData = ['return'=>0,'output'=>['Settings changed for device '.$dev. '<br>Changes will only be in effect after reconnecting the device' ] ];
echo json_encode($jsonData);
return;
}
} else {
$ip = $_POST[$int.'-ipaddress'];
$netmask = mask2cidr($_POST[$int.'-netmask']);
$dns1 = $_POST[$int.'-dnssvr'];
$dns2 = $_POST[$int.'-dnssvralt'];
$cfg['interface'] = $int;
$cfg['routers'] = $_POST[$int.'-gateway'];
$cfg['ip_address'] = $ip."/".$netmask;
$cfg['domain_name_server'] = $dns1." ".$dns2;
$cfg['static'] = $_POST[$int.'-static'];
$cfg['failover'] = $_POST[$int.'-failover'];
}
if (write_php_ini($cfg, RASPI_CONFIG.'/networking/'.$file)) {
$jsonData = ['return'=>0,'output'=>['Successfully Updated Network Configuration']];
} else {
$jsonData = ['return'=>1,'output'=>['Error saving network configuration to file']];
$jsonData = ['return'=>1,'output'=>['Unknown network configuration']];
}
} else {
$jsonData = ['return'=>2,'output'=>'Unable to detect interface'];

View file

@ -1,3 +1,3 @@
SUBSYSTEM=="net", ACTION=="add", SUBSYSTEMS=="usb", ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="14db", NAME="hilink%n", TAG+="systemd", ENV{SYSTEMD_WANTS}="start start_huawei_hilink.service"
SUBSYSTEM=="net", ACTION=="add", SUBSYSTEMS=="usb", ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="14db", NAME="hilink%n", TAG+="systemd", ENV{SYSTEMD_WANTS}="start start_huawei_hilink@hilink%n.service"

View file

@ -0,0 +1,505 @@
#!/bin/bash
#
# Huawei Hilink API
# =================
# - communication with Hilink devices via HTTP
# - send a standard http request with a xml formatted string to the device (default IP 192.169.8.1)
# - Howto:
# o "source" this script in your own script from the command line
# o if hilink_host ip/name differs, set "hilink_host=192.168.178.1" before calling any function
# o if the device is locked by a password, set hilink_user="admin"; hilink_password"1234secret"
# _login is called automatically
# only password type 4 is supported
# o if the SIM is requiring a PIN, set "hilink_pin=1234"
# o connect device to network: _switchMobileData ON ( or 1 )
# o disconnect device: _switchMobileData OFF ( or 0 )
# o get informations about the device: _getDeviceInformation and _getStatus and _getNetProvider
# all functions return XML formatted data in $response.
# o _getAllInformations: returns all available informations as key/value pairs (outputs text)
# o Check if device is connected: "if _isConnected; then .... fi"
# o $response can be parsed by calling _valueFromResponse
# e.g "_valueFromResponse msisdn" to get the phone number after a call to _getDeviceInformation
#
#
# Usage of functions
# - call the function with parameters (if required)
# - return code: 0 - success; 1 - failed
# - $status: status information (OK, ERROR)
# - $response: xml response to be parsed for the required information
#
#
# required software: curl, base64, sha256sum, sed
#
# ToDo: improve error handling
#
# zbchristian 2021
#
# Initialization procedure
# ========================
#
# hilink_host=192.168.8.1 # ip address of device
# hilink_user="admin" # user name if locked (default admin)
# hilink_password="1234Secret" # password if locked
# hilink_pin="1234" # PIN of SIM
# _initHilinkAPI # initialize the API
#
# Termination
# ===========
# cleanup the API before quitting the shell
# _closeHilinkAPI (optional: add parameter "save" to save the session/token data for subsequent calls. Valid for a few minutes.)
#
# BE AWARE, THAT THE API USES SOME GLOBAL VARIABLES : hilink_host, user, password, pin, response, status
# USE THESE ONLY TO COMMUNICATE WITH THE API.
# DO NOT USE THE VARIABLE PRE_FIX "hilink_" FOR YOUR OWN VARIABLES
#
hilink_host_default="192.168.8.1"
hilink_save_file="/tmp/hilink_api_saved.dat"
hilink_save_age=60
hilink_header_file="/tmp/hilink_login_hdr.txt"
# initialize
function _initHilinkAPI() {
local age
if [ -z "$hilink_host" ]; then hilink_host=$hilink_host_default; fi
if ! _hostReachable; then return 1; fi
if [ -f $hilink_save_file ]; then # found file with saved data
_getSavedData
age=$(( $(date +%s) - $(stat $hilink_save_file -c %Y) ))
if [[ $age -gt $hilink_save_age ]]; then
rm -f $hilink_save_file
_logout
_sessToken
fi
fi
if [ -z "$hilink_sessID" ] || [ -z "$hilink_token" ]; then _sessToken; fi
_login
return $?
}
function _getSavedData() {
local dat
if [ -f $hilink_save_file ]; then # restore saved session data
dat=$(cat $hilink_save_file)
hilink_sessID=$(echo "$dat" | sed -nr 's/sessionid: ([a-z0-9]*)/\1/ip')
hilink_token=$(echo "$dat" | sed -nr 's/token: ([a-z0-9]*)/\1/ip')
hilink_tokenlist=( $(echo "$dat" | sed -nr 's/tokenlist: ([a-z0-9 ]*)/\1/ip') )
fi
}
# Cleanup
# parameter: "save" - will store sessionid and tokens in file
function _closeHilinkAPI() {
local opt
if [ -z "$hilink_host" ]; then hilink_host=$hilink_host_default; fi
if ! _hostReachable; then return 1; fi
rm -f $hilink_save_file
[ ! -z "$1" ] && opt="${1,,}"
if [ ! -z "$opt" ] && [ "$opt" = "save" ]; then
echo "sessionid: $hilink_sessID" > $hilink_save_file
echo "token: $hilink_token" >> $hilink_save_file
echo "tokenlist: ${hilink_tokenlist[@]}" >> $hilink_save_file
fi
_logout
hilink_tokenlist=""
hilink_sessID=""
hilink_token=""
return 0
}
# get status (connection status, DNS, )
# parameter: none
function _getStatus() {
if _login; then
if _sendRequest "api/monitoring/status"; then
if [ ! -z "$1" ]; then _valueFromResponse "$1"; fi
fi
return $?
fi
return 1
}
function _isConnected() {
local conn
conn=$(_getStatus "connectionstatus")
status="NO"
if [ ! -z "$conn" ] && [ $conn -eq 901 ]; then
status="YES"
return 0
fi
return 1
}
# get device information (device name, imei, imsi, msisdn-phone number, MAC, WAN IP ...)
# parameter: name of parameter to return
function _getDeviceInformation() {
if _login; then
if _sendRequest "api/device/information"; then
if [ ! -z "$1" ]; then _valueFromResponse "$1"; fi
fi
return $?
fi
return 1
}
# get net provider information
# parameter: name of parameter to return
function _getNetProvider() {
if _login; then
if _sendRequest "api/net/current-plmn"; then
if [ ! -z "$1" ]; then _valueFromResponse "$1"; fi
fi
return $?
fi
return 1
}
# get signal level
# parameter: name of parameter to return
function _getSignal() {
if _login; then
if _sendRequest "api/device/signal"; then
if [ ! -z "$1" ]; then _valueFromResponse "$1"; fi
fi
return $?
fi
return 1
}
function _getAllInformations() {
if _getDeviceInformation; then _keyValuePairs; fi
if _getSignal; then _keyValuePairs; fi
if _getNetProvider; then _keyValuePairs; fi
}
# get status of mobile data connection
# parameter: none
function _getMobileDataStatus() {
if _login; then
if _sendRequest "api/dialup/mobile-dataswitch"; then
status=$(_valueFromResponse "dataswitch")
if [ $? -eq 0 ] && [ ! -z "$status" ]; then echo "$status"; fi
fi
return $?
fi
return 1
}
# PIN of SIM can be passed either as $hilink_pin, or as parameter
# parameter: PIN number of SIM card
function _enableSIM() {
#SimState:
#255 - no SIM,
#256 - error CPIN,
#257 - ready,
#258 - PIN disabled,
#259 - check PIN,
#260 - PIN required,
#261 - PUK required
local simstate
if [ ! -z "$1" ]; then hilink_pin="$1"; fi
if ! _login; then return 1; fi
if _sendRequest "api/pin/status"; then
simstate=$(echo $response | sed -rn 's/.*<simstate>([0-9]*)<\/simstate>.*/\1/pi')
if [[ $simstate -eq 257 ]]; then status="SIM ready"; return 0; fi
if [[ $simstate -eq 260 ]]; then
status="PIN required"
if [ ! -z "$hilink_pin" ]; then _setPIN "$hilink_pin"; fi
return $?
fi
if [[ $simstate -eq 255 ]]; then status="NO SIM"; return 1; fi
fi
return 1
}
# obtain session and verification token - stored in vars $hilink_sessID and $token
# parameter: none
function _sessToken() {
hilink_tokenlist=""
hilink_token=""
hilink_sessID=""
response=$(curl -s http://$hilink_host/api/webserver/SesTokInfo -m 5 2> /dev/null)
if [ -z "$response" ]; then echo "No access to device at $hilink_host"; return 1; fi
status=$(echo "$response" | sed -nr 's/.*<code>([0-9]*)<\/code>.*/\1/ip')
if [ -z "$status" ]; then
hilink_token=$(echo $response | sed -r 's/.*<TokInfo>(.*)<\/TokInfo>.*/\1/')
hilink_sessID=$(echo $response | sed -r 's/.*<SesInfo>(.*)<\/SesInfo>.*/\1/')
if [ ! -z "$hilink_sessID" ] && [ ! -z "$hilink_token" ]; then
hilink_sessID="SessionID=$hilink_sessID"
return 0
fi
fi
return 1
}
# unlock device (if locked) with user name and password
# requires stored hilink_user="admin"; hilink_password"1234secret";hilink_host=$hilink_host_default
# parameter: none
function _login() {
local ret encpw pwtype pwtype3 hashedpw pwtype4
if _loginState; then return 0; fi # login not required, or already done
_sessToken
# get password type
if ! _sendRequest "api/user/state-login"; then return 1; fi
pwtype=$(echo "$response" | sed -rn 's/.*<password_type>([0-9])<\/password_type>.*/\1/pi')
if [ -z "$pwtype" ];then pwtype=4; fi # fallback is type 4
ret=1
if [[ ! -z "$hilink_user" ]] && [[ ! -z "$hilink_password" ]]; then
# password encoding
# type 3 : base64(pw) encoded
# type 4 : base64(sha256sum(user + base64(sha256sum(pw)) + token))
pwtype3=$(echo -n "$hilink_password" | base64 --wrap=0)
hashedpw=$(echo -n "$hilink_password" | sha256sum -b | sed -nr 's/^([0-9a-z]*).*$/\1/ip' )
hashedpw=$(echo -n "$hashedpw" | base64 --wrap=0)
pwtype4=$(echo -n "$hilink_user$hashedpw$hilink_token" | sha256sum -b | sed -nr 's/^([0-9a-z]*).*$/\1/ip' )
encpw=$(echo -n "$pwtype4" | base64 --wrap=0)
if [ $pwtype -ne 4 ]; then encpw=$pwtype3; fi
hilink_xmldata="<?xml version='1.0' encoding='UTF-8'?><request><Username>$hilink_user</Username><Password>$encpw</Password><password_type>$pwtype</password_type></request>"
hilink_xtraopts="--dump-header $hilink_header_file"
rm -f $hilink_header_file
_sendRequest "api/user/login"
if [ ! -z "$status" ] && [ "$status" = "OK" ]; then
# store the list of 30 tokens. Each token is valid for a single request
hilink_tokenlist=( $(cat $hilink_header_file | sed -rn 's/^__RequestVerificationToken:\s*([0-9a-z#]*).*$/\1/pi' | sed 's/#/ /g') )
_getToken
hilink_sessID=$(cat $hilink_header_file | grep -ioP 'SessionID=([a-z0-9]*)')
if [ ! -z "$hilink_sessID" ] && [ ! -z "$hilink_token" ]; then ret=0; fi
fi
rm -f $hilink_header_file
fi
return $ret
}
# logout of hilink device
# parameter: none
function _logout() {
if _loginState; then
hilink_xmldata="<?xml version: '1.0' encoding='UTF-8'?><request><Logout>1</Logout></request>"
if _sendRequest "api/user/logout"; then
hilink_tokenlist=""
hilink_sessID=""
hilink_token=""
hilink_login_enabled=""
fi
return $?
fi
return 1
}
# parameter: none
function _loginState() {
local state
status="OK"
if [ -z "$hilink_login_enabled" ]; then _checkLoginEnabled; fi
if [ $hilink_login_enabled -eq 1 ]; then return 0; fi # login is disabled
_sendRequest "api/user/state-login"
state=`echo "$response" | sed -rn 's/.*<state>(.*)<\/state>.*/\1/pi'`
if [ ! -z "$state" ] && [ $state -eq 0 ]; then # already logged in
return 0
fi
return 1
}
function _checkLoginEnabled() {
local state
if _sendRequest "api/user/hilink_login"; then
hilink_login_enabled=0
state=$(echo $response | sed -rn 's/.*<hilink_login>(.*)<\/hilink_login>.*/\1/pi')
if [ ! -z "$state" ] && [ $state -eq 0 ]; then # no login enabled
hilink_login_enabled=1
fi
else
hilink_login_enabled=""
fi
}
# switch mobile data on/off 1/0
# if SIM is locked, $hilink_pin has to be set
# parameter: state - ON/OFF or 1/0
function _switchMobileData() {
local mode
if [ -z "$1" ]; then return 1; fi
_login
mode="${1,,}"
[ "$mode" = "on" ] && mode=1
[ "$mode" = "off" ] && mode=0
if [[ $mode -ge 0 ]]; then
if _enableSIM "$hilink_pin"; then
hilink_xmldata="<?xml version: '1.0' encoding='UTF-8'?><request><dataswitch>$mode</dataswitch></request>"
_sendRequest "api/dialup/mobile-dataswitch"
return $?
fi
fi
return 1
}
# parameter: PIN of SIM card
function _setPIN() {
local pin
if [ -z "$1" ]; then return 1; fi
pin="$1"
hilink_xmldata="<?xml version: '1.0' encoding='UTF-8'?><request><OperateType>0</OperateType><CurrentPin>$pin</CurrentPin><NewPin></NewPin><PukCode></PukCode></request>"
_sendRequest "api/pin/operate"
return $?
}
# Send request to host at http://$hilink_host/$apiurl
# data in $hilink_xmldata and options in $hilink_xtraopts
# parameter: apiurl (e.g. "api/user/login")
function _sendRequest() {
local ret apiurl
status="ERROR"
if [ -z "$1" ]; then return 1; fi
apiurl="$1"
ret=1
if [ -z "$hilink_sessID" ] || [ -z "$hilink_token" ]; then _sessToken; fi
if [ -z "$hilink_xmldata" ];then
response=$(curl -s http://$hilink_host/$apiurl -m 10 \
-H "Cookie: $hilink_sessID")
else
response=$(curl -s -X POST http://$hilink_host/$apiurl -m 10 \
-H "Content-Type: text/xml" \
-H "Cookie: $hilink_sessID" \
-H "__RequestVerificationToken: $hilink_token" \
-d "$hilink_xmldata" $hilink_xtraopts 2> /dev/null)
_getToken
fi
if [ ! -z "$response" ];then
response=$(echo $response | tr -d '\012\015') # delete newline chars
status=$(echo "$response" | sed -nr 's/.*<code>([0-9]*)<\/code>.*/\1/ip') # check for error code
if [ -z "$status" ]; then
status="OK"
response=$(echo "$response" | sed -nr 's/.*<response>(.*)<\/response>.*/\1/ip')
[ -z "$response" ] && response="none"
ret=0
else
status="ERROR $status"
fi
else
status="ERROR"
fi
if [[ "$status" =~ ERROR ]]; then _handleError; fi
hilink_xtraopts=""
hilink_xmldata=""
return $ret
}
# handle the list of tokens available after login
# parameter: none
function _getToken() {
if [ ! -z "$hilink_tokenlist" ] && [ ${#hilink_tokenlist[@]} -gt 0 ]; then
hilink_token=${hilink_tokenlist[0]} # get first token in list
hilink_tokenlist=("${hilink_tokenlist[@]:1}") # remove used token from list
if [ ${#hilink_tokenlist[@]} -eq 0 ]; then
_logout # use the last token to logout
fi
else
_sessToken # old token has been used - need new session
fi
}
# Analyse $status for error code
# return error text in $status
function _handleError() {
local ret txt
txt=$(_getErrorText)
if [ -z "$code" ]; then return 1; fi
ret=0
case "$code" in
101|108003|108007)
ret=1
status="$txt"
;;
108001|108002|108006)
ret=1
status="$txt"
;;
125001|125002|125003)
_sessToken
ret=0
;;
*)
;;
esac
return "$ret"
}
declare -A hilink_err_api
hilink_err_api[101]="Unable to get session ID/token"
hilink_err_api[108001]="Invalid username/password"
hilink_err_api[108002]=${hilink_err_api[108001]}
hilink_err_api[108006]=${hilink_err_api[108001]}
hilink_err_api[108003]="User already logged in - need to wait a bit"
hilink_err_api[108007]="Too many login attempts - need to wait a bit"
hilink_err_api[125001]="Invalid session/request token"
hilink_err_api[125002]=${hilink_err_api[125001]}
hilink_err_api[125003]=${hilink_err_api[125001]}
# check error and return error text
# status passsed in $status, or $1
function _getErrorText() {
local err code errortext
err="$status"
code="0"
if [ ! -z "$1" ]; then err="$1"; fi
if [ -z "$err" ]; then return 1; fi
errortext="$err"
if [[ "$err" =~ ERROR\ *([0-9]*) ]] && [ ! -z "${BASH_REMATCH[1]}" ]; then
code=${BASH_REMATCH[1]}
if [ ! -z "$code" ] && [ ! -z "${hilink_err_api[$code]}" ]; then
errortext="${hilink_err_api[$code]}"
fi
fi
echo $errortext
return 0
}
function _hostReachable() {
local avail
avail=$( timeout 0.5 ping -c 1 $hilink_host | sed -rn 's/.*time=.*/1/p' )
if [ -z "$avail" ]; then status="ERROR: Not reachable"; return 1; fi
status="OK"
return 0;
}
# helper function to parse $response (xml format) for a value
# call another function first!
# parameter: tag-name
function _valueFromResponse() {
local par value
if [ -z "$response" ] || [ -z "$1" ]; then return 1; fi
par="$1"
value=$(echo $response | sed -rn 's/.*<'$par'>(.*)<\/'$par'>.*/\1/pi')
if [ -z "$value" ]; then return 1; fi
echo "$value"
return 0
}
# list all keys of the current xml response
function _keysFromResponse() {
if [ -z "$response" ]; then return 1; fi
echo $response | grep -oiP "(?<=<)[a-z_-]*(?=>)"
return 0
}
# return all key=value pairs of the current xml response
function _keyValuePairs() {
if [ -z "$response" ]; then return 1; fi
echo $response | sed -n 's/<\([^>]*\)>\(.*\)<\/\1>[^<]*/\1=\"\2\"\n/gpi'
return 0
}
hilink_token=""
hilink_tokenlist=""
hilink_sessID=""
hilink_xmldata=""
hilink_xtraopts=""
hilink_host=$hilink_host_default
hilink_user="admin"
hilink_password=""
hilink_pin=""
response=""
status=""

View file

@ -5,50 +5,53 @@
# $2 : (optional) type - hilink or modem (default: hilink)
# $3 : (optional) for hilink: ip address of the device (default: 192.168.8.1)
# for modem: tty interface for communication (default: /dev/ttypUSB2)
# $4 : more options can be added for Hilink devices ('-u user -P password -p pin'). These are passed to the corresponding script
#
# requires: bc
# calls the scripts info_huawei_hilink.sh and info_huawei_modem.sh (same path as this script)
#
# zbchristian 2020
#
path=$(dirname "$0")
opt="device"
if [ ! -z $1 ]; then opt=${1,,}; fi
if [ ! -z "$1" ]; then opt=${1,,}; fi
type="hilink"
if [ ! -z $2 ]; then type=${2,,}; fi
if [ ! -z "$2" ]; then type=${2,,}; fi
path=`dirname $0`
if [[ $type == "hilink" ]]; then
connect="192.168.8.1"
if [ ! -z $3 ]; then connect=$3; fi
parms=""
if [ "$type" = "hilink" ]; then
connect="-h 192.168.8.1"
if [ ! -z "$3" ]; then connect="-h $3"; fi
if [ ! -z "$4" ]; then parms="$4"; fi
script="$path/info_huawei_hilink.sh"
else
connect="/dev/ttyUSB2"
if [ ! -z $3 ]; then connect=$3; fi
if [ ! -z "$3" ]; then connect=$3; fi
script="$path/info_huawei_modem.sh"
fi
res=`$script $opt $connect`
res=$($script $opt $connect $parms)
# some results require special treatment
case $opt in
# manufacturer)
# if [[ $res == "none" ]]; then res="Huawei"; fi
# if [ "$res" = "none" ]; then res="Huawei"; fi
# ;;
# device)
# if [[ ! $res == "none" ]]; then res="Huawei $res";
# if [ ! "$res" = "none" ]; then res="Huawei $res";
# else res="Huawei"; fi
# ;;
mode)
if [[ ! $res == "none" ]]; then
if [[ $type == "hilink" ]]; then
if [[ $res == "LTE" ]]; then res="4G"
elif [[ $res == "WCDMA" ]]; then res="3G";
if [ ! "$res" = "none" ]; then
if [ "$type" = "hilink" ]; then
if [ "$res" = "LTE" ]; then res="4G"
elif [ "$res" = "WCDMA" ]; then res="3G";
else res="2G"; fi
else
if [[ $res == 7 ]]; then res="4G"
elif [[ $res < 7 ]] && [[ $res > 2 ]] ; then res="3G";
if [ $res -eq 7 ]; then res="4G"
elif [ $res -lt 7 ] && [ $res -gt 2 ] ; then res="3G";
else res="2G"; fi
fi
fi
@ -56,45 +59,45 @@ case $opt in
signal)
# return signal strength/quality in %
if [[ $type == "hilink" ]]; then
if [ "$type" = "hilink" ]; then
# signal request tries to get RSRQ value
# try to get RSRQ (4G), EC/IO (3G) or RSSI (2G) value
if [[ $res == "none" ]]; then res=`$script "ecio"`; fi
if [[ ! $res == "none" ]]; then
if [ "$res" = "none" ]; then res=$($script "ecio"); fi
if [ ! "$res" = "none" ]; then
# for rsrq and ecio assume: -3dB (100%) downto -20dB (0%)
qual=${res//dB/}
if [[ ! "$qual" =~ [-0-9\.]* ]]; then qual=-100; fi
qual=$(bc <<< "scale=0;res=$qual-0.5;res/1") # just round to next integer
if [[ $qual -le -20 ]]; then qual=0;
elif [[ $qual -ge -3 ]]; then qual=100;
if [ $qual -le -20 ]; then qual=0;
elif [ $qual -ge -3 ]; then qual=100;
else qual=$(bc <<< "scale=0;res=100.0/17.0*$qual+2000.0/17.0;res/1"); fi
else
# try rssi: >-70dBm (100%) downto -100dBm (0%)
res=`$script "rssi"`;
if [[ ! $res == "none" ]]; then
if [[ $res =~ [-0-9\.]* ]]; then res="-120 dBm"; fi
res=$($script "rssi");
if [ ! "$res" = "none" ]; then
if [[ ! $res =~ [-0-9\.]* ]]; then res="-120 dBm"; fi
qual=${res//dBm/}
qual=$(bc <<< "scale=0;res=$qual+0.5;res/1") # just round to next integer
if [[ $qual -le -110 ]]; then qual=0;
elif [[ $qual -ge -70 ]]; then qual=100;
if [ $qual -le -110 ]; then qual=0;
elif [ $qual -ge -70 ]; then qual=100;
else qual=$(bc <<< "scale=0;res=2.5*$qual+275;res/1"); fi
fi
fi
else
# modem returns RSSI as number 0-31 - 0 = -113dB (0%), 1 = -111dB, 31 = >=51dB (100%)
qual=$(bc <<< "scale=0;res=$res*3.5+0.5;res/1")
if [[ $qual -gt 100 ]]; then res=100; fi
if [ $qual -gt 100 ]; then res=100; fi
fi
if [[ ! "$res" == "none" ]]; then res="$res (${qual}%)"; fi
if [ ! "$res" = "none" ]; then res="$res (${qual}%)"; fi
;;
operator)
# check if operator/network is just a 5 digit number -> extract network name from table
if [[ $res =~ ^[0-9]{5}$ ]]; then
mcc=${res:0:3}
mnc=${res:3:2}
op=$(cat $path/mcc-mnc-table.csv | sed -rn 's/^'$mcc'\,[0-9]*\,'$mnc'\,(.*\,){4}(.*)$/\2/p')
if [[ ! -z $op ]]; then res="$op ($res)"; fi
if [ ! -z "$op" ]; then res="$op ($res)"; fi
fi
;;

View file

@ -1,49 +1,95 @@
#!/bin/bash
# Infosramtion about HUAWEI hilink (router) modem
# -----------------------------------------------
# Information about HUAWEI hilink
# -------------------------------
# get info about the device and signal
# parameter: $1 - see opts list below
# $2 - host ip address for API calls (optional)
# parameter: $1 - "connected", "device", "ipaddress", "mode", "signal" (see case statement below)
# -u,--user - username
# -P,--password - password
# -p,--pin - SIM pin
# -h,--host - host ip address for API calls (optional)
# returns the value of the parameter, or "none" if not found or empty
#
# zbchristian 2020
# All device informations are buffered for 5 secs to speed up subsequent calls
#
# zbchristian 2021
opts=("device" "imei" "imsi" "telnumber" "ipaddress" "mode" "signal" "rssi" "rsrq" "rsrp" "sinr" "ecio" "operator")
function _setAPIParams() {
if [ ! -z "$hostip" ]; then hilink_host="$hostip"; fi
if [ ! -z "$username" ]; then hilink_user="$username"; fi
if [ ! -z "$password" ]; then hilink_password="$password"; fi
if [ ! -z "$simpin" ]; then hilink_pin="$simpin"; fi
}
# xml tags to extract information from
tags=("devicename" "imei" "imsi" "msisdn" "wanipaddress" "workmode" "rsrq" "rssi" "rsrq" "rsrp" "sinr" "ecio" "fullname")
iurl=( 0 0 0 0 0 0 1 1 1 1 1 1 2)
# api urls
urls=("api/device/information" "api/device/signal" "api/net/current-plmn")
host="192.168.8.1"
if [ ! -z $2 ]; then host=$2; fi
avail=`timeout 0.5 ping -c 1 $host | sed -rn 's/.*time=.*/1/p'`
if [[ -z $avail ]]; then echo "none"; exit; fi
idx=-1
opt=${opts[0]}
if [ ! -z $1 ]; then opt=$1; fi
for i in "${!opts[@]}"; do
if [[ ${opts[$i]} == $opt ]]; then idx=$i; fi
if [ -z "$1" ]; then echo "none"; exit; fi
property="${1,,}"
shift
hostip="192.168.8.1"
while [ -n "$1" ]; do
case "$1" in
-u|--user) username="$2"; shift ;;
-P|--password) password="$2"; shift ;;
-p|--pin) simpin="$2"; shift ;;
-h|--host) hostip="$2"; shift ;;
esac
shift
done
if [[ $idx == -1 ]];then echo "none"; exit; fi
par=${tags[$idx]}
iu=${iurl[$idx]}
status="no valid option given"
result="none"
hostip="192.168.8.1"
if [ "$opt" = "connected" ]; then
source /usr/local/sbin/huawei_hilink_api.sh
_setAPIParams
if ! _initHilinkAPI; then echo "none"; exit; fi
result=$(_getMobileDataStatus)
_closeHilinkAPI
else
info_file="/tmp/huawei_infos_${hostip}_$(id -u).dat"
if [ -f "$info_file" ]; then
age=$(( $(date +%s) - $(stat $info_file -c %Y) ))
if [[ $age -gt 10 ]]; then rm -f $info_file; fi
fi
url="http://$host/${urls[$iu]}"
# echo "Found option $opt at index $idx - tag $par url $url "
if [ -f "$info_file" ]; then
infos=$(cat $info_file)
else
source /usr/local/sbin/huawei_hilink_api.sh
_setAPIParams
if ! _initHilinkAPI; then echo "none"; exit; fi
infos=$(_getAllInformations)
_closeHilinkAPI
if [ ! -z "$infos" ]; then echo -n "$infos" > $info_file; fi
fi
info=""
if [ ! -z $url ]; then info=`curl -s $url`; fi
result=`echo $info | sed -rn 's/.*<'"$par"'>(.*)<\/'"$par"'>.*/\1/pi'`
if [ -z "$result" ]; then result="none"; fi
echo $result
case "$property" in
device|devicename)
key="devicename"
;;
ipaddress|wanipaddress)
key="wanipaddress"
;;
mode)
key="workmode"
;;
telnumber)
key="msisdn"
;;
imei|imsi|rssi|rsrq|rsrp|sinr|ecio)
key="$property"
;;
signal)
key="rsrq"
;;
operator|fullname)
key="fullname"
;;
*)
key="device"
;;
esac
if [ -z "$key" ]; then result="none"; fi
result=$(echo "$infos" | sed -rn 's/'$key'=\"([^ \s]*)\"/\1/ip')
if [ -z "$result" ]; then result="none"; fi
fi
echo -n "$result"

View file

@ -1,138 +1,58 @@
#!/bin/bash
# connect/disconnect Huawei mobile data stick in Hilink mode (e.g. E3372h)
# ========================================================================
# - send xml formatted string via HTTP API to stick
# - Requires session and verification token, which is obtained by an API call
#
# options: -l "user":"password" - login data - DOES NOT WORK YET
# -h 192.168.8.1 - host ip address
# -p 1234 - PIN of SIM card
# -c 0/1 - connect - set datamode off/on
# required software: curl, base64
# options: -u, --user - user name (default "admin")
# -P, --password - password
# -h, --host - host ip address (default 192.168.8.1)
# -d, --devname - device name (IP is extracted using default route)
# -p, --pin - PIN of SIM card
# -c, --connect - connect 0/1 to set datamode off/on
#
# TODO: implement login into API - currently the login has to be disabled!
# required software: curl, base64, sha256sum
#
# zbchristian 2020
# zbchristian 2021
# obtain session and verification token
function _SessToken() {
SesTok=`sudo curl -s http://$host/api/webserver/SesTokInfo -m 5 2> /dev/null`
if [ -z "$SesTok" ]; then exit; fi
# include the hilink API (defaults: hilink_user=admin, hilink_host=192.168.8.1)
source /usr/local/sbin/huawei_hilink_api.sh
token=`echo $SesTok | sed -r 's/.*<TokInfo>(.*)<\/TokInfo>.*/\1/'`
sesinfo=`echo $SesTok | sed -r 's/.*<SesInfo>(.*)<\/SesInfo>.*/\1/'`
}
# include the raspap helper functions
source /usr/local/sbin/raspap_helpers.sh
function _login() {
# ----------------------- THIS DOES NOT WORK ------------------------------------------
# login to web api
_SessToken
if [[ ! -z $user ]] && [[ ! -z $pw ]]; then
# password encoding
# type 3 : base64(pw) encoded
# type 4 : base64(sha256sum(user + base64(sha256sum(pw)) + token))
pwtype3=$(echo $pw | base64 --wrap=0)
hashedpw=$(echo -n "$pw" | sha256sum -b | cut -d " " -f1 | base64 --wrap=0)
pwtype4=$(echo -n "$user$hashedpw$token" | sha256sum -b | cut -d " " -f1 | base64 --wrap=0)
apiurl="api/user/login"
xmldata="<?xml version='1.0' encoding='UTF-8'?><request><Username>$user</Username><Password>$pwtype4</Password><password_type>4</password_type></request>"
# xmldata="<?xml version='1.0' encoding='UTF-8'?><request><Username>$user</Username><Password>$pwtype3</Password><password_type>3</password_type></request>"
xtraopts="--dump-header /tmp/hilink_login_hdr.txt"
_sendRequest
# get updated session cookie
sesinfo=$(grep "SessionID=" /tmp/hilink_login_hdr.txt | cut -d ':' -f2 | cut -d ';' -f1)
token=$(grep "__RequestVerificationTokenone" /tmp/hilink_login_hdr.txt | cut -d ':' -f2)
echo "Login Cookie $sesinfo"
echo "Login Token $token"
fi
# ------------------------------ DO NOT USE THE LOGIN CODE ----------------------------------
}
function _switchMobileData() {
# switch mobile data on/off
if [[ $datamode -ge 0 ]]; then
xmldata="<?xml version: '1.0' encoding='UTF-8'?><request><dataswitch>$datamode</dataswitch></request>"
apiurl="api/dialup/mobile-dataswitch"
_sendRequest
fi
}
function _enableSIM() {
#SimState:
#255 - no SIM,
#256 - error CPIN,
#257 - ready,
#258 - PIN disabled,
#259 - check PIN,
#260 - PIN required,
#261 - PUK required
status=`curl -s http://$host/api/pin/status -m 10`
state=`echo $status | sed -rn 's/.*<simstate>(.*)<\/simstate>.*/\1/pi'`
if [[ $state -eq 257 ]]; then echo "Hilink: SIM ready"|systemd-cat; return; fi
if [[ $state -eq 260 ]]; then echo "Hilink: Set PIN"|systemd-cat; _setPIN; fi
}
function _setPIN() {
if [[ ! -z $pin ]]; then
xmldata="<?xml version: '1.0' encoding='UTF-8'?><request><OperateType>0</OperateType><CurrentPin>$pin</CurrentPin><NewPin></NewPin><PukCode></PukCode></request>"
apiurl="api/pin/operate"
_sendRequest
fi
}
function _sendRequest() {
result=""
if [[ -z $xmldata ]]; then return; fi
result=`curl -s http://$host/$apiurl -m 10 \
-H "Content-Type: application/xml" \
-H "Cookie: $sesinfo" \
-H "__RequestVerificationToken: $token" \
-d "$xmldata" $xtraopts 2> /dev/null`
xtraopts=""
}
# handle options
host="192.168.8.1"
pin=""
user=""
pw=""
datamode=-1
connect=-1
while getopts ":c:h:l:m:p:" opt; do
case $opt in
h) if [[ $OPTARG =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then host="$OPTARG"; fi
;;
p) if [[ $OPTARG =~ ^[0-9]{4,8} ]]; then pin="$OPTARG"; fi
;;
l) if [[ $OPTARG =~ ^[0-9a-zA-Z]*:.*$ ]]; then
user=$(echo "$OPTARG" | cut -d':' -f1);
pw=$(echo "$OPTARG" | cut -d':' -f2);
fi
;;
c) if [[ $OPTARG == "1" ]]; then datamode=1; else datamode=0; fi
;;
esac
datamode=""
devname=""
while [ -n "$1" ]; do
case "$1" in
-u|--user) hilink_user="$2"; shift ;;
-P|--password) hilink_password="$2"; shift ;;
-p|--pin) if [[ $2 =~ ^[0-9]{4,8} ]]; then hilink_pin="$2"; fi; shift ;;
-h|--host) hilink_host="$2"; shift ;;
-d|--devname) devname="$2"; shift ;;
-c|--connect) if [ "$2" = "1" ]; then datamode=1; else datamode=0; fi; shift ;;
esac
shift
done
echo "Hilink: switch device at $host to mode $datamode" | systemd-cat
# check if device is reachable
avail=`timeout 0.5 ping -c 1 $host | sed -rn 's/.*time=.*/1/p'`
if [[ -z $avail ]]; then
echo "Hilink: no link to host" | systemd-cat
exit
if [ ! -z "$devname" ]; then # get host IP for given device name
gw=$(ip route list | sed -rn "s/default via (([0-9]{1,3}\.){3}[0-9]{1,3}).*dev $devname.*/\1/p")
if [ -z "$gw" ]; then exit; fi # device name not found in routing list -> abort
hilink_host="$gw"
fi
token=""
Sesinfo=""
xmldata=""
xtraopts=""
result=""
if [ -z "$hilink_password" ] || [ -z "$hilink_pin" ]; then
_getAuthRouter
if [ ! -z "$raspap_user" ]; then hilink_user="$raspap_user"; fi
if [ ! -z "$raspap_password" ]; then hilink_password="$raspap_password"; fi
if [ ! -z "$raspap_pin" ]; then hilink_pin="$raspap_pin"; fi
fi
_SessToken
_enableSIM
_switchMobileData # check and perform enable/disable mobile data connection
echo "Hilink: switch device at $hilink_host to mode $datamode" | systemd-cat
status="usage: -c 1/0 to disconnect/connect"
if [ -z "$datamode" ] || [ ! _initHilinkAPI ]; then echo "Hilink: failed - return status: $status"; exit; fi
if ! _switchMobileData "$datamode"; then echo -n "Hilink: could not switch the data mode on/off . Error: ";_getErrorText; fi
if ! _closeHilinkAPI; then echo -n "Hilink: failed - return status: $status . Error: ";_getErrorText; fi

View file

@ -0,0 +1,51 @@
#!/bin/bash
#
# Helper functions to extract informations from RaspAP config/settings
#
# zbchristian 2021
#
# get the values of a RaspAP config variable
# call: _getRaspapConfig RASPAP_MOBILEDATA_CONFIG
raspap_webroot="/var/www/html"
function _getWebRoot() {
local path
path=$(cat /etc/lighttpd/lighttpd.conf | sed -rn "s/server.document-root \s*= \"([^ \s]*)\"/\1/p")
if [ ! -z "$path" ]; then raspap_webroot="$path"; fi
if [ -z "$path" ]; then return 1; else return 0; fi
}
# expand an RaspAP config variable utilizing PHP
function _getRaspapConfig() {
local conf var
raspap_config=""
var="$1"
if [ ! -z "$var" ]; then
if ! _getWebRoot; then return 1; fi
conf="$raspap_webroot/includes/config.php"
if [ -f "$conf" ]; then
conf=$(php -r 'include "'$conf'"; echo '$var';' 2> /dev/null)
if [ ! -z "$conf" ] && [ -d ${conf%/*} ]; then raspap_config="$conf"; fi
fi
fi
if [ -z "$raspap_config" ]; then return 1; else return 0; fi
}
# Username and password for mobile data devices is stored in a file (RASPAP_MOBILEDATA_CONFIG)
function _getAuthRouter() {
local mfile mdata pin user pw
if ! _getRaspapConfig "RASPI_MOBILEDATA_CONFIG"; then return 1; fi
mfile="$raspap_config"
if [ -f $mfile ]; then
mdata=$(cat "$mfile")
pin=$(echo "$mdata" | sed -rn 's/pin = ([^ \s]*)/\1/ip')
if [ ! -z "$pin" ]; then raspap_pin="$pin"; fi
user=$(echo "$mdata" | sed -rn 's/router_user = ([^ \s]*)/\1/ip')
if [ ! -z "$user" ]; then raspap_user="$user"; fi
pw=$(echo "$mdata" | sed -rn 's/router_pw = ([^ \s]*)/\1/ip')
if [ ! -z "$pw" ]; then raspap_password="$pw"; fi
return 0
fi
return 1
}

View file

@ -5,7 +5,7 @@ Description=Bring up HUAWEI mobile hilink device
Type=oneshot
RemainAfterExit=no
ExecStart=/bin/sleep 15
ExecStart=/usr/local/sbin/switchClientState.sh up
ExecStart=/usr/local/sbin/onoff_huawei_hilink.sh -c 1 -d %i
[Install]
Alias=start_ltemodem.service

View file

@ -1,34 +0,0 @@
#!/bin/bash
# start with "sudo"
# parameters: up or on
#
# switch client state to UP
# the actual code is in PHP
# get webroot
webroot=$(cat /etc/lighttpd/lighttpd.conf | sed -rn 's/server.document-root\s*=\s*\"(.*)\"\s*$/\1/p')
if [ -z "$webroot" ] || [ ! -d "$webroot" ]; then
exit
fi
cd $webroot
state=""
if [ ! -z $1 ] && [[ $1 =~ ^(up|on|UP|ON)$ ]]; then
state="up"
elif [ ! -z $1 ] && [[ $1 =~ ^(down|off|DOWN|OFF)$ ]]; then
state="down"
fi
[ -z "$state" ] && exit
php << _EOF_
<?php
require_once("includes/config.php");
require_once("includes/get_clients.php");
loadClientConfig();
setClientState("$state");
?>
_EOF_

View file

@ -39,10 +39,10 @@
"type": "hilink",
"type_info": "Huawei Hilink",
"clientid": 4,
"comment": "Huawei mobile data device in router mode. Control via HTTP",
"comment": "Huawei mobile data device in router mode. Control via HTTP. Device is connecting via service",
"name_prefix": "hilink",
"default_ip": "192.168.8.1",
"udev_rule": "SUBSYSTEM==\"net\", ACTION==\"add\", SUBSYSTEMS==\"usb\", ATTRS{idVendor}==\"$IDVENDOR$\", ATTRS{idProduct}==\"$IDPRODUCT$\", NAME=\"$DEVNAME$\", ENV{raspapType}=\"hilink\", TAG+=\"systemd\", ENV{SYSTEMD_WANTS}=\"start start_huawei_hilink.service\" "
"udev_rule": "SUBSYSTEM==\"net\", ACTION==\"add\", SUBSYSTEMS==\"usb\", ATTRS{idVendor}==\"$IDVENDOR$\", ATTRS{idProduct}==\"$IDPRODUCT$\", NAME=\"$DEVNAME$\", ENV{raspapType}=\"hilink\", TAG+=\"systemd\", ENV{SYSTEMD_WANTS}=\"start start_huawei_hilink@hilink%n.service\" "
},
{
"type": "phone",

View file

@ -28,6 +28,7 @@ define('RASPI_LIGHTTPD_CONFIG', '/etc/lighttpd/lighttpd.conf');
define('RASPI_ACCESS_CHECK_IP', '1.1.1.1');
define('RASPI_ACCESS_CHECK_DNS', 'one.one.one.one');
define('RASPI_CLIENT_CONFIG_PATH', '/etc/raspap/networking/client_udev_prototypes.json');
define('RASPI_MOBILEDATA_CONFIG', '/etc/raspap/networking/mobiledata.ini');
define('RASPI_CLIENT_SCRIPT_PATH', '/usr/local/sbin');
// Constant for the 5GHz wireless regulatory domain

View file

@ -128,23 +128,26 @@ function getClients($simple=true)
$cl["device"][$i]["operator"] = $res[0];
break;
case "hilink":
$pin=$user=$pw="";
getMobileLogin($pin,$pw,$user);
$opts=$pin.' '.$user.' '.$pw;
unset($res);
// exec("ip link show $dev 2> /dev/null | grep -oP ' UP '",$res);
exec("ifconfig -a | grep -i $dev -A 1 | grep -oP '(?<=inet )([0-9]{1,3}\.){3}'", $apiadd);
$apiadd = !empty($apiadd) ? $apiadd[0]."1" : "";
unset($res);
exec("$path/info_huawei.sh mode hilink $apiadd", $res);
exec("$path/info_huawei.sh mode hilink $apiadd \"$opts\" ", $res);
$cl["device"][$i]["mode"] = $res[0];
unset($res);
exec("$path/info_huawei.sh device hilink $apiadd", $res);
exec("$path/info_huawei.sh device hilink $apiadd \"$opts\" ", $res);
if ($res[0] != "none" ) {
$cl["device"][$i]["model"] = $res[0];
}
unset($res);
exec("$path/info_huawei.sh signal hilink $apiadd", $res);
exec("$path/info_huawei.sh signal hilink $apiadd \"$opts\" ", $res);
$cl["device"][$i]["signal"] = $res[0];
unset($ipadd);
exec("$path/info_huawei.sh ipaddress hilink $apiadd", $ipadd);
exec("$path/info_huawei.sh ipaddress hilink $apiadd \"$opts\" ", $ipadd);
if (!empty($ipadd) && $ipadd[0] !== "none" ) {
$cl["device"][$i]["connected"] = "y";
$cl["device"][$i]["wan_ip"] = $ipadd[0];
@ -153,7 +156,7 @@ function getClients($simple=true)
$cl["device"][$i]["wan_ip"] = "-";
}
unset($res);
exec("$path/info_huawei.sh operator hilink $apiadd", $res);
exec("$path/info_huawei.sh operator hilink $apiadd \"$opts\" ", $res);
$cl["device"][$i]["operator"] = $res[0];
break;
case "phone":
@ -194,6 +197,15 @@ function getClientType($dev) {
return $type;
}
function getMobileLogin(&$pin,&$pw,&$user) {
if (file_exists(($f = RASPI_MOBILEDATA_CONFIG))) {
$dat = parse_ini_file($f);
$pin = (isset($dat["pin"]) && preg_match("/^[0-9]*$/", $dat["pin"])) ? "-p ".$dat["pin"] : "";
$user = (isset($dat["router_user"]) && !empty($dat["router_user"]) ) ? "-u ".$dat["router_user"] : "";
$pw = (isset($dat["router_pw"]) && !empty($dat["router_pw"]) ) ? "-P ".$dat["router_pw"] : "";
}
}
function loadClientConfig()
{
// load network device config file for UDEV rules into $_SESSION
@ -271,12 +283,9 @@ function setClientState($state)
preg_match("/^([0-9]{1,3}\.){3}/", $connected, $ipadd);
$ipadd = $ipadd[0].'1'; // ip address of the Hilink api
$mode = ($state == "up") ? 1 : 0;
$pin="";
if (file_exists(($f = RASPI_CONFIG."/networking/mobiledata.ini"))) {
$dat = parse_ini_file($f);
$pin = (isset($dat["pin"]) && preg_match("/^[0-9]*$/", $dat["pin"])) ? $dat["pin"] : "";
}
exec('sudo '.RASPI_CLIENT_SCRIPT_PATH.'/onoff_huawei_hilink.sh -c '.$mode.' -h '.$ipadd.' -p '.$pin);
$pin=$user=$pw="";
getMobileLogin($pin,$pw,$user);
exec('sudo '.RASPI_CLIENT_SCRIPT_PATH.'/onoff_huawei_hilink.sh -c '.$mode.' -h '.$ipadd.' '.$pin.' '.$user.' '.$pw);
break;
case "ppp":
if ($state == "up") {

View file

@ -55,7 +55,6 @@ www-data ALL=(ALL) NOPASSWD:/usr/local/sbin/onoff_huawei_hilink.sh *
www-data ALL=(ALL) NOPASSWD:/bin/sed -i * /etc/wvdial.conf
www-data ALL=(ALL) NOPASSWD:/bin/sed -i * /etc/udev/rules.d/80-raspap-net-devices.rules
www-data ALL=(ALL) NOPASSWD:/usr/bin/tee -a /etc/udev/rules.d/80-raspap-net-devices.rules
www-data ALL=(ALL) NOPASSWD:/usr/local/sbin/switchClientState.sh *
www-data ALL=(ALL) NOPASSWD:/usr/bin/tee /tmp/wireguard.log
www-data ALL=(ALL) NOPASSWD:/bin/systemctl * wg-quick@wg0
www-data ALL=(ALL) NOPASSWD:/usr/bin/wg

View file

@ -77,7 +77,7 @@
<button type="button" onClick="window.location.reload();" class="btn btn-outline btn-primary"><i class="fas fa-sync-alt"></i> <?php echo _("Refresh") ?></a>
</div>
<?php $arrMD = file_exists(($f = RASPI_CONFIG."/networking/mobiledata.ini")) ? parse_ini_file($f) : false;
<?php $arrMD = file_exists(($f = RASPI_MOBILEDATA_CONFIG)) ? parse_ini_file($f) : false;
if ($arrMD==false) { $arrMD=[]; $arrMD["pin"]=$arrMD["apn"]=$arrMD["apn_user"]=$arrMD["apn_pw"]=$arrMD["router_user"]=$arrMD["router_pw"]=""; }
?>
<div role="tabpanel" class="tab-pane fade in" id="netdevices">