linux-surface/patches/5.9/0002-wifi.patch

From 55a8d7c9af472a0d194ac6d74e11445dcf5e8aea Mon Sep 17 00:00:00 2001
From: Tsuchiya Yuto <kitakar@gmail.com>
Date: Thu, 24 Sep 2020 18:02:06 +0900
Subject: [PATCH] mwifiex: pcie: skip cancel_work_sync() on reset failure path

If a reset is performed, but even the reset fails for some reasons (e.g.,
on Surface devices, the fw reset requires another quirks),
cancel_work_sync() hangs in mwifiex_cleanup_pcie().

    # reset performed after firmware went into bad state
    kernel: mwifiex_pcie 0000:01:00.0: WLAN FW already running! Skip FW dnld
    kernel: mwifiex_pcie 0000:01:00.0: WLAN FW is active
    # but even the reset failed
    kernel: mwifiex_pcie 0000:01:00.0: mwifiex_cmd_timeout_func: Timeout cmd id = 0xfa, act = 0xa000
    kernel: mwifiex_pcie 0000:01:00.0: num_data_h2c_failure = 0
    kernel: mwifiex_pcie 0000:01:00.0: num_cmd_h2c_failure = 0
    kernel: mwifiex_pcie 0000:01:00.0: is_cmd_timedout = 1
    kernel: mwifiex_pcie 0000:01:00.0: num_tx_timeout = 0
    kernel: mwifiex_pcie 0000:01:00.0: last_cmd_index = 2
    kernel: mwifiex_pcie 0000:01:00.0: last_cmd_id: 16 00 a4 00 fa 00 a4 00 7f 00
    kernel: mwifiex_pcie 0000:01:00.0: last_cmd_act: 00 00 00 00 00 a0 00 00 00 00
    kernel: mwifiex_pcie 0000:01:00.0: last_cmd_resp_index = 0
    kernel: mwifiex_pcie 0000:01:00.0: last_cmd_resp_id: 16 80 7f 80 16 80 a4 80 7f 80
    kernel: mwifiex_pcie 0000:01:00.0: last_event_index = 1
    kernel: mwifiex_pcie 0000:01:00.0: last_event: 58 00 58 00 58 00 58 00 58 00
    kernel: mwifiex_pcie 0000:01:00.0: data_sent=0 cmd_sent=1
    kernel: mwifiex_pcie 0000:01:00.0: ps_mode=0 ps_state=0
    kernel: mwifiex_pcie 0000:01:00.0: info: _mwifiex_fw_dpc: unregister device
    # mwifiex_pcie_work hanged
    kernel: INFO: task kworker/0:0:24857 blocked for more than 122 seconds.
    kernel:       Tainted: G        W  OE     5.3.11-arch1-1 #1
    kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    kernel: kworker/0:0     D    0 24857      2 0x80004000
    kernel: Workqueue: events mwifiex_pcie_work [mwifiex_pcie]
    kernel: Call Trace:
    kernel:  ? __schedule+0x27f/0x6d0
    kernel:  schedule+0x43/0xd0
    kernel:  schedule_timeout+0x299/0x3d0
    kernel:  ? __switch_to_asm+0x40/0x70
    kernel:  wait_for_common+0xeb/0x190
    kernel:  ? wake_up_q+0x60/0x60
    kernel:  __flush_work+0x130/0x1e0
    kernel:  ? flush_workqueue_prep_pwqs+0x130/0x130
    kernel:  __cancel_work_timer+0x123/0x1b0
    kernel:  mwifiex_cleanup_pcie+0x28/0xd0 [mwifiex_pcie]
    kernel:  mwifiex_free_adapter+0x24/0xe0 [mwifiex]
    kernel:  _mwifiex_fw_dpc+0x28d/0x520 [mwifiex]
    kernel:  mwifiex_reinit_sw+0x15d/0x2c0 [mwifiex]
    kernel:  mwifiex_pcie_reset_done+0x50/0x80 [mwifiex_pcie]
    kernel:  pci_try_reset_function+0x38/0x70
    kernel:  process_one_work+0x1d1/0x3a0
    kernel:  worker_thread+0x4a/0x3d0
    kernel:  kthread+0xfb/0x130
    kernel:  ? process_one_work+0x3a0/0x3a0
    kernel:  ? kthread_park+0x80/0x80
    kernel:  ret_from_fork+0x35/0x40

This is a deadlock caused by calling cancel_work_sync() in
mwifiex_cleanup_pcie():

- Device resets are done via mwifiex_pcie_card_reset()
- which schedules card->work to call mwifiex_pcie_card_reset_work()
- which calls pci_try_reset_function().
- This leads to mwifiex_pcie_reset_done() be called on the same workqueue,
  which in turn calls
- mwifiex_reinit_sw() and that calls
- _mwifiex_fw_dpc().

The problem is now that _mwifiex_fw_dpc() calls mwifiex_free_adapter()
in case firmware initialization fails. That ends up calling
mwifiex_cleanup_pcie().

Note that all those calls are still running on the workqueue. So when
mwifiex_cleanup_pcie() now calls cancel_work_sync(), it's really waiting
on itself to complete, causing a deadlock.

This commit fixes the deadlock by skipping cancel_work_sync() on a reset
failure path.

After this commit, when reset fails, the following output is
expected to be shown:

    kernel: mwifiex_pcie 0000:03:00.0: info: _mwifiex_fw_dpc: unregister device
    kernel: mwifiex: Failed to bring up adapter: -5
    kernel: mwifiex_pcie 0000:03:00.0: reinit failed: -5

To reproduce this issue, for example, try putting the root port of wifi
into D3 (replace "00:1d.3" with your setup).

    # put into D3 (root port)
    sudo setpci -v -s 00:1d.3 CAP_PM+4.b=0b

Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Patchset: wifi
---
 drivers/net/wireless/marvell/mwifiex/pcie.c | 18 +++++++++++++++++-
 drivers/net/wireless/marvell/mwifiex/pcie.h |  2 ++
 2 files changed, 19 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c
index 87b4ccca4b9a..00138d6129f4 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.c
@@ -377,6 +377,8 @@ static void mwifiex_pcie_reset_prepare(struct pci_dev *pdev)
 	clear_bit(MWIFIEX_IFACE_WORK_DEVICE_DUMP, &card->work_flags);
 	clear_bit(MWIFIEX_IFACE_WORK_CARD_RESET, &card->work_flags);
 	mwifiex_dbg(adapter, INFO, "%s, successful\n", __func__);
+
+	card->pci_reset_ongoing = true;
 }
 
 /*
@@ -405,6 +407,8 @@ static void mwifiex_pcie_reset_done(struct pci_dev *pdev)
 		dev_err(&pdev->dev, "reinit failed: %d\n", ret);
 	else
 		mwifiex_dbg(adapter, INFO, "%s, successful\n", __func__);
+
+	card->pci_reset_ongoing = false;
 }
 
 static const struct pci_error_handlers mwifiex_pcie_err_handler = {
@@ -2995,7 +2999,19 @@ static void mwifiex_cleanup_pcie(struct mwifiex_adapter *adapter)
 	int ret;
 	u32 fw_status;
 
-	cancel_work_sync(&card->work);
+	/* Perform the cancel_work_sync() only when we're not resetting
+	 * the card. It's because that function never returns if we're
+	 * in reset path. If we're here when resetting the card, it means
+	 * that we failed to reset the card (reset failure path).
+	 */
+	if (!card->pci_reset_ongoing) {
+		mwifiex_dbg(adapter, MSG, "performing cancel_work_sync()...\n");
+		cancel_work_sync(&card->work);
+		mwifiex_dbg(adapter, MSG, "cancel_work_sync() done\n");
+	} else {
+		mwifiex_dbg(adapter, MSG,
+			    "skipped cancel_work_sync() because we're in card reset failure path\n");
+	}
 
 	ret = mwifiex_read_reg(adapter, reg->fw_status, &fw_status);
 	if (fw_status == FIRMWARE_READY_PCIE) {
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.h b/drivers/net/wireless/marvell/mwifiex/pcie.h
index fc59b522f670..048f4db6027a 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie.h
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.h
@@ -391,6 +391,8 @@ struct pcie_service_card {
 	struct mwifiex_msix_context share_irq_ctx;
 	struct work_struct work;
 	unsigned long work_flags;
+
+	bool pci_reset_ongoing;
 };
 
 static inline int
-- 
2.29.2

From 5f0c4f9b2190f49e42605c722d90ac7cde94353d Mon Sep 17 00:00:00 2001
From: Tsuchiya Yuto <kitakar@gmail.com>
Date: Mon, 28 Sep 2020 17:46:49 +0900
Subject: [PATCH] mwifiex: pcie: add DMI-based quirk impl for Surface devices

This commit adds quirk implementation based on DMI matching with DMI
table for Surface devices.

This implementation can be used for quirks later.

Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Patchset: wifi
---
 drivers/net/wireless/marvell/mwifiex/Makefile |   1 +
 drivers/net/wireless/marvell/mwifiex/pcie.c   |   4 +
 drivers/net/wireless/marvell/mwifiex/pcie.h   |   1 +
 .../wireless/marvell/mwifiex/pcie_quirks.c    | 114 ++++++++++++++++++
 .../wireless/marvell/mwifiex/pcie_quirks.h    |  11 ++
 5 files changed, 131 insertions(+)
 create mode 100644 drivers/net/wireless/marvell/mwifiex/pcie_quirks.c
 create mode 100644 drivers/net/wireless/marvell/mwifiex/pcie_quirks.h

diff --git a/drivers/net/wireless/marvell/mwifiex/Makefile b/drivers/net/wireless/marvell/mwifiex/Makefile
index fdfd9bf15ed4..8a1e7c5b9c6e 100644
--- a/drivers/net/wireless/marvell/mwifiex/Makefile
+++ b/drivers/net/wireless/marvell/mwifiex/Makefile
@@ -49,6 +49,7 @@ mwifiex_sdio-y += sdio.o
 obj-$(CONFIG_MWIFIEX_SDIO) += mwifiex_sdio.o
 
 mwifiex_pcie-y += pcie.o
+mwifiex_pcie-y += pcie_quirks.o
 obj-$(CONFIG_MWIFIEX_PCIE) += mwifiex_pcie.o
 
 mwifiex_usb-y += usb.o
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c
index 00138d6129f4..899ce2657880 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.c
@@ -27,6 +27,7 @@
 #include "wmm.h"
 #include "11n.h"
 #include "pcie.h"
+#include "pcie_quirks.h"
 
 #define PCIE_VERSION	"1.0"
 #define DRV_NAME        "Marvell mwifiex PCIe"
@@ -261,6 +262,9 @@ static int mwifiex_pcie_probe(struct pci_dev *pdev,
 			return ret;
 	}
 
+	/* check quirks */
+	mwifiex_initialize_quirks(card);
+
 	if (mwifiex_add_card(card, &card->fw_done, &pcie_ops,
 			     MWIFIEX_PCIE, &pdev->dev)) {
 		pr_err("%s failed\n", __func__);
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.h b/drivers/net/wireless/marvell/mwifiex/pcie.h
index 048f4db6027a..51566380f8da 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie.h
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.h
@@ -393,6 +393,7 @@ struct pcie_service_card {
 	unsigned long work_flags;
 
 	bool pci_reset_ongoing;
+	unsigned long quirks;
 };
 
 static inline int
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c
new file mode 100644
index 000000000000..929aee2b0a60
--- /dev/null
+++ b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * File for PCIe quirks.
+ */
+
+/* The low-level PCI operations will be performed in this file. Therefore,
+ * let's use dev_*() instead of mwifiex_dbg() here to avoid troubles (e.g.
+ * to avoid using mwifiex_adapter struct before init or wifi is powered
+ * down, or causes NULL ptr deref).
+ */
+
+#include <linux/dmi.h>
+
+#include "pcie_quirks.h"
+
+/* quirk table based on DMI matching */
+static const struct dmi_system_id mwifiex_quirk_table[] = {
+	{
+		.ident = "Surface Pro 4",
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Pro 4"),
+		},
+		.driver_data = 0,
+	},
+	{
+		.ident = "Surface Pro 5",
+		.matches = {
+			/* match for SKU here due to generic product name "Surface Pro" */
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "Surface_Pro_1796"),
+		},
+		.driver_data = 0,
+	},
+	{
+		.ident = "Surface Pro 5 (LTE)",
+		.matches = {
+			/* match for SKU here due to generic product name "Surface Pro" */
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "Surface_Pro_1807"),
+		},
+		.driver_data = 0,
+	},
+	{
+		.ident = "Surface Pro 6",
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Pro 6"),
+		},
+		.driver_data = 0,
+	},
+	{
+		.ident = "Surface Book 1",
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Book"),
+		},
+		.driver_data = 0,
+	},
+	{
+		.ident = "Surface Book 2",
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Book 2"),
+		},
+		.driver_data = 0,
+	},
+	{
+		.ident = "Surface Laptop 1",
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Laptop"),
+		},
+		.driver_data = 0,
+	},
+	{
+		.ident = "Surface Laptop 2",
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Laptop 2"),
+		},
+		.driver_data = 0,
+	},
+	{
+		.ident = "Surface 3",
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface 3"),
+		},
+		.driver_data = 0,
+	},
+	{
+		.ident = "Surface Pro 3",
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Pro 3"),
+		},
+		.driver_data = 0,
+	},
+	{}
+};
+
+void mwifiex_initialize_quirks(struct pcie_service_card *card)
+{
+	struct pci_dev *pdev = card->dev;
+	const struct dmi_system_id *dmi_id;
+
+	dmi_id = dmi_first_match(mwifiex_quirk_table);
+	if (dmi_id)
+		card->quirks = (uintptr_t)dmi_id->driver_data;
+
+	if (!card->quirks)
+		dev_info(&pdev->dev, "no quirks enabled\n");
+}
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h
new file mode 100644
index 000000000000..5326ae7e5671
--- /dev/null
+++ b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Header file for PCIe quirks.
+ */
+
+#include "pcie.h"
+
+/* quirks */
+// quirk flags can be added here
+
+void mwifiex_initialize_quirks(struct pcie_service_card *card);
-- 
2.29.2

From aa4a3ba7776db9ba12c57d0ad705ed298f27d9dd Mon Sep 17 00:00:00 2001
From: Tsuchiya Yuto <kitakar@gmail.com>
Date: Tue, 29 Sep 2020 17:25:22 +0900
Subject: [PATCH] mwifiex: pcie: add reset_d3cold quirk for Surface gen4+
 devices

To reset mwifiex on Surface gen4+ (Pro 4 or later gen) devices, it
seems that putting the wifi device into D3cold is required according
to errata.inf file on Windows installation (Windows/INF/errata.inf).

This patch adds a function that performs power-cycle (put into D3cold
then D0) and call the function at the end of reset_prepare().

Note: Need to also reset the parent device (bridge) of wifi on SB1;
it might be because the bridge of wifi always reports it's in D3hot.
When I tried to reset only the wifi device (not touching parent), it gave
the following error and the reset failed:

    acpi device:4b: Cannot transition to power state D0 for parent in D3hot
    mwifiex_pcie 0000:03:00.0: can't change power state from D3cold to D0 (config space inaccessible)

Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Patchset: wifi
---
 drivers/net/wireless/marvell/mwifiex/pcie.c   |  7 ++
 .../wireless/marvell/mwifiex/pcie_quirks.c    | 73 +++++++++++++++++--
 .../wireless/marvell/mwifiex/pcie_quirks.h    |  3 +-
 3 files changed, 74 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c
index 899ce2657880..45488c2bc1c1 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.c
@@ -380,6 +380,13 @@ static void mwifiex_pcie_reset_prepare(struct pci_dev *pdev)
 	mwifiex_shutdown_sw(adapter);
 	clear_bit(MWIFIEX_IFACE_WORK_DEVICE_DUMP, &card->work_flags);
 	clear_bit(MWIFIEX_IFACE_WORK_CARD_RESET, &card->work_flags);
+
+	/* For Surface gen4+ devices, we need to put wifi into D3cold right
+	 * before performing FLR
+	 */
+	if (card->quirks & QUIRK_FW_RST_D3COLD)
+		mwifiex_pcie_reset_d3cold_quirk(pdev);
+
 	mwifiex_dbg(adapter, INFO, "%s, successful\n", __func__);
 
 	card->pci_reset_ongoing = true;
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c
index 929aee2b0a60..edc739c542fe 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c
@@ -21,7 +21,7 @@ static const struct dmi_system_id mwifiex_quirk_table[] = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
 			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Pro 4"),
 		},
-		.driver_data = 0,
+		.driver_data = (void *)QUIRK_FW_RST_D3COLD,
 	},
 	{
 		.ident = "Surface Pro 5",
@@ -30,7 +30,7 @@ static const struct dmi_system_id mwifiex_quirk_table[] = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
 			DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "Surface_Pro_1796"),
 		},
-		.driver_data = 0,
+		.driver_data = (void *)QUIRK_FW_RST_D3COLD,
 	},
 	{
 		.ident = "Surface Pro 5 (LTE)",
@@ -39,7 +39,7 @@ static const struct dmi_system_id mwifiex_quirk_table[] = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
 			DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "Surface_Pro_1807"),
 		},
-		.driver_data = 0,
+		.driver_data = (void *)QUIRK_FW_RST_D3COLD,
 	},
 	{
 		.ident = "Surface Pro 6",
@@ -47,7 +47,7 @@ static const struct dmi_system_id mwifiex_quirk_table[] = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
 			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Pro 6"),
 		},
-		.driver_data = 0,
+		.driver_data = (void *)QUIRK_FW_RST_D3COLD,
 	},
 	{
 		.ident = "Surface Book 1",
@@ -55,7 +55,7 @@ static const struct dmi_system_id mwifiex_quirk_table[] = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
 			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Book"),
 		},
-		.driver_data = 0,
+		.driver_data = (void *)QUIRK_FW_RST_D3COLD,
 	},
 	{
 		.ident = "Surface Book 2",
@@ -63,7 +63,7 @@ static const struct dmi_system_id mwifiex_quirk_table[] = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
 			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Book 2"),
 		},
-		.driver_data = 0,
+		.driver_data = (void *)QUIRK_FW_RST_D3COLD,
 	},
 	{
 		.ident = "Surface Laptop 1",
@@ -71,7 +71,7 @@ static const struct dmi_system_id mwifiex_quirk_table[] = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
 			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Laptop"),
 		},
-		.driver_data = 0,
+		.driver_data = (void *)QUIRK_FW_RST_D3COLD,
 	},
 	{
 		.ident = "Surface Laptop 2",
@@ -79,7 +79,7 @@ static const struct dmi_system_id mwifiex_quirk_table[] = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
 			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Laptop 2"),
 		},
-		.driver_data = 0,
+		.driver_data = (void *)QUIRK_FW_RST_D3COLD,
 	},
 	{
 		.ident = "Surface 3",
@@ -111,4 +111,61 @@ void mwifiex_initialize_quirks(struct pcie_service_card *card)
 
 	if (!card->quirks)
 		dev_info(&pdev->dev, "no quirks enabled\n");
+	if (card->quirks & QUIRK_FW_RST_D3COLD)
+		dev_info(&pdev->dev, "quirk reset_d3cold enabled\n");
+}
+
+static void mwifiex_pcie_set_power_d3cold(struct pci_dev *pdev)
+{
+	dev_info(&pdev->dev, "putting into D3cold...\n");
+
+	pci_save_state(pdev);
+	if (pci_is_enabled(pdev))
+		pci_disable_device(pdev);
+	pci_set_power_state(pdev, PCI_D3cold);
+}
+
+static int mwifiex_pcie_set_power_d0(struct pci_dev *pdev)
+{
+	int ret;
+
+	dev_info(&pdev->dev, "putting into D0...\n");
+
+	pci_set_power_state(pdev, PCI_D0);
+	ret = pci_enable_device(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "pci_enable_device failed\n");
+		return ret;
+	}
+	pci_restore_state(pdev);
+
+	return 0;
+}
+
+int mwifiex_pcie_reset_d3cold_quirk(struct pci_dev *pdev)
+{
+	struct pci_dev *parent_pdev = pci_upstream_bridge(pdev);
+	int ret;
+
+	/* Power-cycle (put into D3cold then D0) */
+	dev_info(&pdev->dev, "Using reset_d3cold quirk to perform FW reset\n");
+
+	/* We need to perform power-cycle also for bridge of wifi because
+	 * on some devices (e.g. Surface Book 1), the OS for some reasons
+	 * can't know the real power state of the bridge.
+	 * When tried to power-cycle only wifi, the reset failed with the
+	 * following dmesg log:
+	 * "Cannot transition to power state D0 for parent in D3hot".
+	 */
+	mwifiex_pcie_set_power_d3cold(pdev);
+	mwifiex_pcie_set_power_d3cold(parent_pdev);
+
+	ret = mwifiex_pcie_set_power_d0(parent_pdev);
+	if (ret)
+		return ret;
+	ret = mwifiex_pcie_set_power_d0(pdev);
+	if (ret)
+		return ret;
+
+	return 0;
 }
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h
index 5326ae7e5671..8b9dcb5070d8 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h
+++ b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h
@@ -6,6 +6,7 @@
 #include "pcie.h"
 
 /* quirks */
-// quirk flags can be added here
+#define QUIRK_FW_RST_D3COLD	BIT(0)
 
 void mwifiex_initialize_quirks(struct pcie_service_card *card);
+int mwifiex_pcie_reset_d3cold_quirk(struct pci_dev *pdev);
-- 
2.29.2

From b71f152c8b9f3b07bf64c00db1cc54808104fb9e Mon Sep 17 00:00:00 2001
From: Tsuchiya Yuto <kitakar@gmail.com>
Date: Tue, 29 Sep 2020 17:32:22 +0900
Subject: [PATCH] mwifiex: pcie: add reset_wsid quirk for Surface 3

This commit adds reset_wsid quirk and uses this quirk for Surface 3 on
card reset.

To reset mwifiex on Surface 3, it seems that calling the _DSM method
exists in \_SB.WSID [1] device is required.

On Surface 3, calling the _DSM method removes/re-probes the card by
itself. So, need to place the reset function before performing FLR and
skip performing any other reset-related works.

Note that Surface Pro 3 also has the WSID device [2], but it seems to need
more work. This commit only supports Surface 3 yet.

[1] https://github.com/linux-surface/acpidumps/blob/05cba925f3a515f222acb5b3551a032ddde958fe/surface_3/dsdt.dsl#L11947-L12011
[2] https://github.com/linux-surface/acpidumps/blob/05cba925f3a515f222acb5b3551a032ddde958fe/surface_pro_3/dsdt.dsl#L12164-L12216

Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Patchset: wifi
---
 drivers/net/wireless/marvell/mwifiex/pcie.c   | 10 +++
 .../wireless/marvell/mwifiex/pcie_quirks.c    | 77 ++++++++++++++++++-
 .../wireless/marvell/mwifiex/pcie_quirks.h    |  5 ++
 3 files changed, 91 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c
index 45488c2bc1c1..daae572ce94e 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.c
@@ -2817,6 +2817,16 @@ static void mwifiex_pcie_card_reset_work(struct mwifiex_adapter *adapter)
 {
 	struct pcie_service_card *card = adapter->card;
 
+	/* On Surface 3, reset_wsid method removes then re-probes card by
+	 * itself. So, need to place it here and skip performing any other
+	 * reset-related works.
+	 */
+	if (card->quirks & QUIRK_FW_RST_WSID_S3) {
+		mwifiex_pcie_reset_wsid_quirk(card->dev);
+		/* skip performing any other reset-related works */
+		return;
+	}
+
 	/* We can't afford to wait here; remove() might be waiting on us. If we
 	 * can't grab the device lock, maybe we'll get another chance later.
 	 */
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c
index edc739c542fe..f0a6fa0a7ae5 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c
@@ -9,10 +9,21 @@
  * down, or causes NULL ptr deref).
  */
 
+#include <linux/acpi.h>
 #include <linux/dmi.h>
 
 #include "pcie_quirks.h"
 
+/* For reset_wsid quirk */
+#define ACPI_WSID_PATH		"\\_SB.WSID"
+#define WSID_REV		0x0
+#define WSID_FUNC_WIFI_PWR_OFF	0x1
+#define WSID_FUNC_WIFI_PWR_ON	0x2
+/* WSID _DSM UUID: "534ea3bf-fcc2-4e7a-908f-a13978f0c7ef" */
+static const guid_t wsid_dsm_guid =
+	GUID_INIT(0x534ea3bf, 0xfcc2, 0x4e7a,
+		  0x90, 0x8f, 0xa1, 0x39, 0x78, 0xf0, 0xc7, 0xef);
+
 /* quirk table based on DMI matching */
 static const struct dmi_system_id mwifiex_quirk_table[] = {
 	{
@@ -87,7 +98,7 @@ static const struct dmi_system_id mwifiex_quirk_table[] = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
 			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface 3"),
 		},
-		.driver_data = 0,
+		.driver_data = (void *)QUIRK_FW_RST_WSID_S3,
 	},
 	{
 		.ident = "Surface Pro 3",
@@ -113,6 +124,9 @@ void mwifiex_initialize_quirks(struct pcie_service_card *card)
 		dev_info(&pdev->dev, "no quirks enabled\n");
 	if (card->quirks & QUIRK_FW_RST_D3COLD)
 		dev_info(&pdev->dev, "quirk reset_d3cold enabled\n");
+	if (card->quirks & QUIRK_FW_RST_WSID_S3)
+		dev_info(&pdev->dev,
+			 "quirk reset_wsid for Surface 3 enabled\n");
 }
 
 static void mwifiex_pcie_set_power_d3cold(struct pci_dev *pdev)
@@ -169,3 +183,64 @@ int mwifiex_pcie_reset_d3cold_quirk(struct pci_dev *pdev)
 
 	return 0;
 }
+
+int mwifiex_pcie_reset_wsid_quirk(struct pci_dev *pdev)
+{
+	acpi_handle handle;
+	union acpi_object *obj;
+	acpi_status status;
+
+	dev_info(&pdev->dev, "Using reset_wsid quirk to perform FW reset\n");
+
+	status = acpi_get_handle(NULL, ACPI_WSID_PATH, &handle);
+	if (ACPI_FAILURE(status)) {
+		dev_err(&pdev->dev, "No ACPI handle for path %s\n",
+			ACPI_WSID_PATH);
+		return -ENODEV;
+	}
+
+	if (!acpi_has_method(handle, "_DSM")) {
+		dev_err(&pdev->dev, "_DSM method not found\n");
+		return -ENODEV;
+	}
+
+	if (!acpi_check_dsm(handle, &wsid_dsm_guid,
+			    WSID_REV, WSID_FUNC_WIFI_PWR_OFF)) {
+		dev_err(&pdev->dev,
+			"_DSM method doesn't support wifi power off func\n");
+		return -ENODEV;
+	}
+
+	if (!acpi_check_dsm(handle, &wsid_dsm_guid,
+			    WSID_REV, WSID_FUNC_WIFI_PWR_ON)) {
+		dev_err(&pdev->dev,
+			"_DSM method doesn't support wifi power on func\n");
+		return -ENODEV;
+	}
+
+	/* card will be removed immediately after this call on Surface 3 */
+	dev_info(&pdev->dev, "turning wifi off...\n");
+	obj = acpi_evaluate_dsm(handle, &wsid_dsm_guid,
+				WSID_REV, WSID_FUNC_WIFI_PWR_OFF,
+				NULL);
+	if (!obj) {
+		dev_err(&pdev->dev,
+			"device _DSM execution failed for turning wifi off\n");
+		return -EIO;
+	}
+	ACPI_FREE(obj);
+
+	/* card will be re-probed immediately after this call on Surface 3 */
+	dev_info(&pdev->dev, "turning wifi on...\n");
+	obj = acpi_evaluate_dsm(handle, &wsid_dsm_guid,
+				WSID_REV, WSID_FUNC_WIFI_PWR_ON,
+				NULL);
+	if (!obj) {
+		dev_err(&pdev->dev,
+			"device _DSM execution failed for turning wifi on\n");
+		return -EIO;
+	}
+	ACPI_FREE(obj);
+
+	return 0;
+}
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h
index 8b9dcb5070d8..3ef7440418e3 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h
+++ b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h
@@ -7,6 +7,11 @@
 
 /* quirks */
 #define QUIRK_FW_RST_D3COLD	BIT(0)
+/* Surface 3 and Surface Pro 3 have the same _DSM method but need to
+ * be handled differently. Currently, only S3 is supported.
+ */
+#define QUIRK_FW_RST_WSID_S3	BIT(1)
 
 void mwifiex_initialize_quirks(struct pcie_service_card *card);
 int mwifiex_pcie_reset_d3cold_quirk(struct pci_dev *pdev);
+int mwifiex_pcie_reset_wsid_quirk(struct pci_dev *pdev);
-- 
2.29.2

From 8436fce91900d6d49d815022e474eb49ce20af9b Mon Sep 17 00:00:00 2001
From: Tsuchiya Yuto <kitakar@gmail.com>
Date: Wed, 30 Sep 2020 18:08:24 +0900
Subject: [PATCH] mwifiex: pcie: (OEMB) add quirk for Surface 3 with broken DMI
 table

(made referring to http://git.osdn.net/view?p=android-x86/kernel.git;a=commitdiff;h=18e2e857c57633b25b3b4120f212224a108cd883)

On some Surface 3, the DMI table gets corrupted for unknown reasons
and breaks existing DMI matching used for device-specific quirks.

This commit adds the (broken) DMI info for the affected Surface 3.

On affected systems, DMI info will look like this:
    $ grep . /sys/devices/virtual/dmi/id/{bios_vendor,board_name,board_vendor,\
    chassis_vendor,product_name,sys_vendor}
    /sys/devices/virtual/dmi/id/bios_vendor:American Megatrends Inc.
    /sys/devices/virtual/dmi/id/board_name:OEMB
    /sys/devices/virtual/dmi/id/board_vendor:OEMB
    /sys/devices/virtual/dmi/id/chassis_vendor:OEMB
    /sys/devices/virtual/dmi/id/product_name:OEMB
    /sys/devices/virtual/dmi/id/sys_vendor:OEMB

Expected:
    $ grep . /sys/devices/virtual/dmi/id/{bios_vendor,board_name,board_vendor,\
    chassis_vendor,product_name,sys_vendor}
    /sys/devices/virtual/dmi/id/bios_vendor:American Megatrends Inc.
    /sys/devices/virtual/dmi/id/board_name:Surface 3
    /sys/devices/virtual/dmi/id/board_vendor:Microsoft Corporation
    /sys/devices/virtual/dmi/id/chassis_vendor:Microsoft Corporation
    /sys/devices/virtual/dmi/id/product_name:Surface 3
    /sys/devices/virtual/dmi/id/sys_vendor:Microsoft Corporation

Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Patchset: wifi
---
 drivers/net/wireless/marvell/mwifiex/pcie_quirks.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c
index f0a6fa0a7ae5..34dcd84f02a6 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c
@@ -100,6 +100,15 @@ static const struct dmi_system_id mwifiex_quirk_table[] = {
 		},
 		.driver_data = (void *)QUIRK_FW_RST_WSID_S3,
 	},
+	{
+		.ident = "Surface 3",
+		.matches = {
+			DMI_EXACT_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "OEMB"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "OEMB"),
+		},
+		.driver_data = (void *)QUIRK_FW_RST_WSID_S3,
+	},
 	{
 		.ident = "Surface Pro 3",
 		.matches = {
-- 
2.29.2

From 358752a3b7f02e10d03d71846b5c21a391582025 Mon Sep 17 00:00:00 2001
From: Tsuchiya Yuto <kitakar@gmail.com>
Date: Thu, 24 Sep 2020 01:56:29 +0900
Subject: [PATCH] mwifiex: fix mwifiex_shutdown_sw() causing sw reset failure

When FLR is performed but without fw reset for some reasons (e.g. on
Surface devices, fw reset requires another quirk), it fails to reset
properly. You can trigger the issue on such devices via debugfs entry
for reset:

    $ echo 1 | sudo tee /sys/kernel/debug/mwifiex/mlan0/reset

and the resulting dmesg log:

    mwifiex_pcie 0000:03:00.0: Resetting per request
    mwifiex_pcie 0000:03:00.0: info: successfully disconnected from [BSSID]: reason code 3
    mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
    mwifiex_pcie 0000:03:00.0: deleting the crypto keys
    mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
    mwifiex_pcie 0000:03:00.0: deleting the crypto keys
    mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
    mwifiex_pcie 0000:03:00.0: deleting the crypto keys
    mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
    mwifiex_pcie 0000:03:00.0: deleting the crypto keys
    mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
    mwifiex_pcie 0000:03:00.0: deleting the crypto keys
    mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
    mwifiex_pcie 0000:03:00.0: deleting the crypto keys
    mwifiex_pcie 0000:03:00.0: info: shutdown mwifiex...
    mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
    mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
    mwifiex_pcie 0000:03:00.0: WLAN FW already running! Skip FW dnld
    mwifiex_pcie 0000:03:00.0: WLAN FW is active
    mwifiex_pcie 0000:03:00.0: Unknown api_id: 4
    mwifiex_pcie 0000:03:00.0: info: MWIFIEX VERSION: mwifiex 1.0 (15.68.19.p21)
    mwifiex_pcie 0000:03:00.0: driver_version = mwifiex 1.0 (15.68.19.p21)
    mwifiex_pcie 0000:03:00.0: info: trying to associate to '[SSID]' bssid [BSSID]
    mwifiex_pcie 0000:03:00.0: info: associated to bssid [BSSID] successfully
    mwifiex_pcie 0000:03:00.0: cmd_wait_q terminated: -110
    mwifiex_pcie 0000:03:00.0: info: successfully disconnected from [BSSID]: reason code 15
    mwifiex_pcie 0000:03:00.0: cmd_wait_q terminated: -110
    mwifiex_pcie 0000:03:00.0: deleting the crypto keys
    mwifiex_pcie 0000:03:00.0: cmd_wait_q terminated: -110
    mwifiex_pcie 0000:03:00.0: deleting the crypto keys
    mwifiex_pcie 0000:03:00.0: cmd_wait_q terminated: -110
    mwifiex_pcie 0000:03:00.0: deleting the crypto keys
    [...]

When comparing mwifiex_shutdown_sw() with mwifiex_pcie_remove(), it
lacks mwifiex_init_shutdown_fw().

This commit fixes mwifiex_shutdown_sw() by adding the missing
mwifiex_init_shutdown_fw().

Fixes: 4c5dae59d2e9 ("mwifiex: add PCIe function level reset support")
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Patchset: wifi
---
 drivers/net/wireless/marvell/mwifiex/main.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/marvell/mwifiex/main.c b/drivers/net/wireless/marvell/mwifiex/main.c
index 9ee5600351a7..5965999f1b9b 100644
--- a/drivers/net/wireless/marvell/mwifiex/main.c
+++ b/drivers/net/wireless/marvell/mwifiex/main.c
@@ -1469,6 +1469,8 @@ int mwifiex_shutdown_sw(struct mwifiex_adapter *adapter)
 	priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY);
 	mwifiex_deauthenticate(priv, NULL);
 
+	mwifiex_init_shutdown_fw(priv, MWIFIEX_FUNC_SHUTDOWN);
+
 	mwifiex_uninit_sw(adapter);
 	adapter->is_up = false;
 
-- 
2.29.2

From c9e45a33790fda3ec588790e162bd2c1b95aa2ad Mon Sep 17 00:00:00 2001
From: Tsuchiya Yuto <kitakar@gmail.com>
Date: Thu, 24 Sep 2020 01:56:34 +0900
Subject: [PATCH] mwifiex: pcie: use shutdown_sw()/reinit_sw() on
 suspend()/resume()

There are issues with S0ix achievement and AP scanning after suspend
with the current Host Sleep method.

When using the Host Sleep method, it prevents the platform to reach S0ix
during suspend. Also, after suspend, sometimes AP scanning won't work,
resulting in non-working wifi.

To fix such issues, perform shutdown_sw()/reinit_sw() instead of Host
Sleep.

As a side effect, this patch disables wakeups (means that Wake-On-WLAN
can't be used anymore, if it was working before), and might also reset
some internal states.

Note that suspend() no longer checks if it's already suspended.

With the previous Host Sleep method, the check was done by looking at
adapter->hs_activated in mwifiex_enable_hs() [sta_ioctl.c], but not
MWIFIEX_IS_SUSPENDED. So, what the previous method checked was instead
Host Sleep state, not suspend itself. Therefore, there is no need to check
the suspend state now.

Also removed comment for suspend state check at top of suspend()
accordingly.

Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Patchset: wifi
---
 drivers/net/wireless/marvell/mwifiex/main.c |  4 +--
 drivers/net/wireless/marvell/mwifiex/pcie.c | 29 +++++++--------------
 2 files changed, 12 insertions(+), 21 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/main.c b/drivers/net/wireless/marvell/mwifiex/main.c
index 5965999f1b9b..74bf0076daec 100644
--- a/drivers/net/wireless/marvell/mwifiex/main.c
+++ b/drivers/net/wireless/marvell/mwifiex/main.c
@@ -1453,7 +1453,7 @@ static void mwifiex_uninit_sw(struct mwifiex_adapter *adapter)
 }
 
 /*
- * This function gets called during PCIe function level reset.
+ * This function can be used for shutting down the adapter SW.
  */
 int mwifiex_shutdown_sw(struct mwifiex_adapter *adapter)
 {
@@ -1481,7 +1481,7 @@ int mwifiex_shutdown_sw(struct mwifiex_adapter *adapter)
 }
 EXPORT_SYMBOL_GPL(mwifiex_shutdown_sw);
 
-/* This function gets called during PCIe function level reset. Required
+/* This function can be used for reinitting the adapter SW. Required
  * code is extracted from mwifiex_add_card()
  */
 int
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c
index daae572ce94e..b46d56389c3b 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.c
@@ -145,8 +145,7 @@ static bool mwifiex_pcie_ok_to_access_hw(struct mwifiex_adapter *adapter)
  * registered functions must have drivers with suspend and resume
  * methods. Failing that the kernel simply removes the whole card.
  *
- * If already not suspended, this function allocates and sends a host
- * sleep activate request to the firmware and turns off the traffic.
+ * This function shuts down the adapter.
  */
 static int mwifiex_pcie_suspend(struct device *dev)
 {
@@ -154,31 +153,21 @@ static int mwifiex_pcie_suspend(struct device *dev)
 	struct pcie_service_card *card = dev_get_drvdata(dev);
 
 
-	/* Might still be loading firmware */
-	wait_for_completion(&card->fw_done);
-
 	adapter = card->adapter;
 	if (!adapter) {
 		dev_err(dev, "adapter is not valid\n");
 		return 0;
 	}
 
-	mwifiex_enable_wake(adapter);
-
-	/* Enable the Host Sleep */
-	if (!mwifiex_enable_hs(adapter)) {
+	/* Shut down SW */
+	if (mwifiex_shutdown_sw(adapter)) {
 		mwifiex_dbg(adapter, ERROR,
 			    "cmd: failed to suspend\n");
-		clear_bit(MWIFIEX_IS_HS_ENABLING, &adapter->work_flags);
-		mwifiex_disable_wake(adapter);
 		return -EFAULT;
 	}
 
-	flush_workqueue(adapter->workqueue);
-
 	/* Indicate device suspended */
 	set_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags);
-	clear_bit(MWIFIEX_IS_HS_ENABLING, &adapter->work_flags);
 
 	return 0;
 }
@@ -188,13 +177,13 @@ static int mwifiex_pcie_suspend(struct device *dev)
  * registered functions must have drivers with suspend and resume
  * methods. Failing that the kernel simply removes the whole card.
  *
- * If already not resumed, this function turns on the traffic and
- * sends a host sleep cancel request to the firmware.
+ * If already not resumed, this function reinits the adapter.
  */
 static int mwifiex_pcie_resume(struct device *dev)
 {
 	struct mwifiex_adapter *adapter;
 	struct pcie_service_card *card = dev_get_drvdata(dev);
+	int ret;
 
 
 	if (!card->adapter) {
@@ -212,9 +201,11 @@ static int mwifiex_pcie_resume(struct device *dev)
 
 	clear_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags);
 
-	mwifiex_cancel_hs(mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA),
-			  MWIFIEX_ASYNC_CMD);
-	mwifiex_disable_wake(adapter);
+	ret = mwifiex_reinit_sw(adapter);
+	if (ret)
+		dev_err(dev, "reinit failed: %d\n", ret);
+	else
+		mwifiex_dbg(adapter, INFO, "%s, successful\n", __func__);
 
 	return 0;
 }
-- 
2.29.2

From cb39f7580b59a883fe26f9de928c5c45620cae70 Mon Sep 17 00:00:00 2001
From: Tsuchiya Yuto <kitakar@gmail.com>
Date: Mon, 24 Aug 2020 17:11:35 +0900
Subject: [PATCH] mwifiex: pcie: add enable_device_dump module parameter

The devicve_dump may take a little bit long time and users may want to
disable the dump for daily usage.

This commit adds a new module parameter and disables device_dump by
default.

Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Patchset: wifi
---
 drivers/net/wireless/marvell/mwifiex/pcie.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c
index b46d56389c3b..1847a0274991 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.c
@@ -34,6 +34,11 @@
 
 static struct mwifiex_if_ops pcie_ops;
 
+static bool enable_device_dump;
+module_param(enable_device_dump, bool, 0644);
+MODULE_PARM_DESC(enable_device_dump,
+		 "enable device_dump (default: disabled)");
+
 static const struct of_device_id mwifiex_pcie_of_match_table[] = {
 	{ .compatible = "pci11ab,2b42" },
 	{ .compatible = "pci1b4b,2b42" },
@@ -2791,6 +2796,12 @@ static void mwifiex_pcie_fw_dump(struct mwifiex_adapter *adapter)
 
 static void mwifiex_pcie_device_dump_work(struct mwifiex_adapter *adapter)
 {
+	if (!enable_device_dump) {
+		mwifiex_dbg(adapter, MSG,
+			    "device_dump is disabled by module parameter\n");
+		return;
+	}
+
 	adapter->devdump_data = vzalloc(MWIFIEX_FW_DUMP_SIZE);
 	if (!adapter->devdump_data) {
 		mwifiex_dbg(adapter, ERROR,
-- 
2.29.2

From 5d6178c68fcf14f9daacdbf7c23902ffe8fa5831 Mon Sep 17 00:00:00 2001
From: Tsuchiya Yuto <kitakar@gmail.com>
Date: Sun, 4 Oct 2020 00:11:49 +0900
Subject: [PATCH] mwifiex: pcie: disable bridge_d3 for Surface gen4+

Currently, mwifiex fw will crash after suspend on recent kernel series.
On Windows, it seems that the root port of wifi will never enter D3 state
(stay on D0 state). And on Linux, disabling the D3 state for the
bridge fixes fw crashing after suspend.

This commit disables the D3 state of root port on driver initialization
and fixes fw crashing after suspend.

Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Patchset: wifi
---
 drivers/net/wireless/marvell/mwifiex/pcie.c   |  7 +++++
 .../wireless/marvell/mwifiex/pcie_quirks.c    | 27 +++++++++++++------
 .../wireless/marvell/mwifiex/pcie_quirks.h    |  1 +
 3 files changed, 27 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c
index 1847a0274991..3bd39d9ba3de 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.c
@@ -226,6 +226,7 @@ static int mwifiex_pcie_probe(struct pci_dev *pdev,
 					const struct pci_device_id *ent)
 {
 	struct pcie_service_card *card;
+	struct pci_dev *parent_pdev = pci_upstream_bridge(pdev);
 	int ret;
 
 	pr_debug("info: vendor=0x%4.04X device=0x%4.04X rev=%d\n",
@@ -267,6 +268,12 @@ static int mwifiex_pcie_probe(struct pci_dev *pdev,
 		return -1;
 	}
 
+	/* disable bridge_d3 for Surface gen4+ devices to fix fw crashing
+	 * after suspend
+	 */
+	if (card->quirks & QUIRK_NO_BRIDGE_D3)
+		parent_pdev->bridge_d3 = false;
+
 	return 0;
 }
 
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c
index 34dcd84f02a6..a2aeb2af907e 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c
@@ -32,7 +32,8 @@ static const struct dmi_system_id mwifiex_quirk_table[] = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
 			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Pro 4"),
 		},
-		.driver_data = (void *)QUIRK_FW_RST_D3COLD,
+		.driver_data = (void *)(QUIRK_FW_RST_D3COLD |
+					QUIRK_NO_BRIDGE_D3),
 	},
 	{
 		.ident = "Surface Pro 5",
@@ -41,7 +42,8 @@ static const struct dmi_system_id mwifiex_quirk_table[] = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
 			DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "Surface_Pro_1796"),
 		},
-		.driver_data = (void *)QUIRK_FW_RST_D3COLD,
+		.driver_data = (void *)(QUIRK_FW_RST_D3COLD |
+					QUIRK_NO_BRIDGE_D3),
 	},
 	{
 		.ident = "Surface Pro 5 (LTE)",
@@ -50,7 +52,8 @@ static const struct dmi_system_id mwifiex_quirk_table[] = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
 			DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "Surface_Pro_1807"),
 		},
-		.driver_data = (void *)QUIRK_FW_RST_D3COLD,
+		.driver_data = (void *)(QUIRK_FW_RST_D3COLD |
+					QUIRK_NO_BRIDGE_D3),
 	},
 	{
 		.ident = "Surface Pro 6",
@@ -58,7 +61,8 @@ static const struct dmi_system_id mwifiex_quirk_table[] = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
 			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Pro 6"),
 		},
-		.driver_data = (void *)QUIRK_FW_RST_D3COLD,
+		.driver_data = (void *)(QUIRK_FW_RST_D3COLD |
+					QUIRK_NO_BRIDGE_D3),
 	},
 	{
 		.ident = "Surface Book 1",
@@ -66,7 +70,8 @@ static const struct dmi_system_id mwifiex_quirk_table[] = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
 			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Book"),
 		},
-		.driver_data = (void *)QUIRK_FW_RST_D3COLD,
+		.driver_data = (void *)(QUIRK_FW_RST_D3COLD |
+					QUIRK_NO_BRIDGE_D3),
 	},
 	{
 		.ident = "Surface Book 2",
@@ -74,7 +79,8 @@ static const struct dmi_system_id mwifiex_quirk_table[] = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
 			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Book 2"),
 		},
-		.driver_data = (void *)QUIRK_FW_RST_D3COLD,
+		.driver_data = (void *)(QUIRK_FW_RST_D3COLD |
+					QUIRK_NO_BRIDGE_D3),
 	},
 	{
 		.ident = "Surface Laptop 1",
@@ -82,7 +88,8 @@ static const struct dmi_system_id mwifiex_quirk_table[] = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
 			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Laptop"),
 		},
-		.driver_data = (void *)QUIRK_FW_RST_D3COLD,
+		.driver_data = (void *)(QUIRK_FW_RST_D3COLD |
+					QUIRK_NO_BRIDGE_D3),
 	},
 	{
 		.ident = "Surface Laptop 2",
@@ -90,7 +97,8 @@ static const struct dmi_system_id mwifiex_quirk_table[] = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
 			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Laptop 2"),
 		},
-		.driver_data = (void *)QUIRK_FW_RST_D3COLD,
+		.driver_data = (void *)(QUIRK_FW_RST_D3COLD |
+					QUIRK_NO_BRIDGE_D3),
 	},
 	{
 		.ident = "Surface 3",
@@ -136,6 +144,9 @@ void mwifiex_initialize_quirks(struct pcie_service_card *card)
 	if (card->quirks & QUIRK_FW_RST_WSID_S3)
 		dev_info(&pdev->dev,
 			 "quirk reset_wsid for Surface 3 enabled\n");
+	if (card->quirks & QUIRK_NO_BRIDGE_D3)
+		dev_info(&pdev->dev,
+			 "quirk no_brigde_d3 enabled\n");
 }
 
 static void mwifiex_pcie_set_power_d3cold(struct pci_dev *pdev)
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h
index 3ef7440418e3..a95ebac06e13 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h
+++ b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h
@@ -11,6 +11,7 @@
  * be handled differently. Currently, only S3 is supported.
  */
 #define QUIRK_FW_RST_WSID_S3	BIT(1)
+#define QUIRK_NO_BRIDGE_D3	BIT(2)
 
 void mwifiex_initialize_quirks(struct pcie_service_card *card);
 int mwifiex_pcie_reset_d3cold_quirk(struct pci_dev *pdev);
-- 
2.29.2

From c87cf357966a2047e0159e59e3d1a1fedb41ac22 Mon Sep 17 00:00:00 2001
From: Tsuchiya Yuto <kitakar@gmail.com>
Date: Sun, 4 Oct 2020 00:25:48 +0900
Subject: [PATCH] mwifiex: add allow_ps_mode module parameter

This commit adds the allow_ps_mode module parameter and set it false
(disallowed) by default, to make ps_mode (power_save) control easier.

On some setups (e.g., with 5GHz AP), power_save causes connection
completely unstable. So, we need to disable it. However, userspace tools
may try to enable it. For this reason, we need to tell userspace that
power_save is disallowed by default.

When this parameter is set to false, changing the power_save mode will
be disallowed like the following:

    $ sudo iw dev mlan0 set power_save on
    command failed: Operation not permitted (-1)

Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Patchset: wifi
---
 drivers/net/wireless/marvell/mwifiex/cfg80211.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
index 96848fa0e417..786f7a197613 100644
--- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
@@ -25,6 +25,11 @@
 static char *reg_alpha2;
 module_param(reg_alpha2, charp, 0);
 
+static bool allow_ps_mode;
+module_param(allow_ps_mode, bool, 0644);
+MODULE_PARM_DESC(allow_ps_mode,
+		 "allow WiFi power management to be enabled. (default: disallowed)");
+
 static const struct ieee80211_iface_limit mwifiex_ap_sta_limits[] = {
 	{
 		.max = MWIFIEX_MAX_BSS_NUM,
@@ -435,6 +440,17 @@ mwifiex_cfg80211_set_power_mgmt(struct wiphy *wiphy,
 
 	ps_mode = enabled;
 
+	/* Allow ps_mode to be enabled only when allow_ps_mode is true */
+	if (ps_mode && !allow_ps_mode) {
+		mwifiex_dbg(priv->adapter, MSG,
+			    "Enabling ps_mode disallowed by modparam\n");
+
+		/* Return -EPERM to inform userspace tools that setting
+		 * power_save to be enabled is not permitted.
+		 */
+		return -EPERM;
+	}
+
 	return mwifiex_drv_set_power(priv, &ps_mode);
 }
 
-- 
2.29.2

From 099df989cf42ced34fd67f725771678d45cdb17b Mon Sep 17 00:00:00 2001
From: Tsuchiya Yuto <kitakar@gmail.com>
Date: Sun, 4 Oct 2020 00:38:48 +0900
Subject: [PATCH] mwifiex: print message when changing ps_mode

Users may want to know the ps_mode state change (e.g., diagnosing
connection issues). This commit adds the print when changing ps_mode.

Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Patchset: wifi
---
 drivers/net/wireless/marvell/mwifiex/cfg80211.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
index 786f7a197613..8f4b8bc5ff03 100644
--- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
@@ -451,6 +451,13 @@ mwifiex_cfg80211_set_power_mgmt(struct wiphy *wiphy,
 		return -EPERM;
 	}
 
+	if (ps_mode)
+		mwifiex_dbg(priv->adapter, MSG,
+			    "Enabling ps_mode, disable if unstable.\n");
+	else
+		mwifiex_dbg(priv->adapter, MSG,
+			    "Disabling ps_mode.\n");
+
 	return mwifiex_drv_set_power(priv, &ps_mode);
 }
 
-- 
2.29.2

From e69efbe8054c16a7af76ac8c5a9bcec0a2c0eb7e Mon Sep 17 00:00:00 2001
From: Tsuchiya Yuto <kitakar@gmail.com>
Date: Sun, 4 Oct 2020 00:59:37 +0900
Subject: [PATCH] mwifiex: disable ps_mode explicitly by default instead

At least on Surface devices, the ps_mode causes connection unstable,
especially with 5GHz APs. Then, it eventually causes fw crashing.

This commit disables ps_mode by default instead of enabling it.

Required code is extracted from mwifiex_drv_set_power().

Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Patchset: wifi
---
 drivers/net/wireless/marvell/mwifiex/sta_cmd.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/sta_cmd.c b/drivers/net/wireless/marvell/mwifiex/sta_cmd.c
index d3a968ef21ef..9b7b52fbc9c4 100644
--- a/drivers/net/wireless/marvell/mwifiex/sta_cmd.c
+++ b/drivers/net/wireless/marvell/mwifiex/sta_cmd.c
@@ -2333,14 +2333,19 @@ int mwifiex_sta_init_cmd(struct mwifiex_private *priv, u8 first_sta, bool init)
 			return -1;
 
 		if (priv->bss_type != MWIFIEX_BSS_TYPE_UAP) {
-			/* Enable IEEE PS by default */
-			priv->adapter->ps_mode = MWIFIEX_802_11_POWER_MODE_PSP;
+			/* Disable IEEE PS by default */
+			priv->adapter->ps_mode = MWIFIEX_802_11_POWER_MODE_CAM;
 			ret = mwifiex_send_cmd(priv,
 					       HostCmd_CMD_802_11_PS_MODE_ENH,
-					       EN_AUTO_PS, BITMAP_STA_PS, NULL,
+					       DIS_AUTO_PS, BITMAP_STA_PS, NULL,
 					       true);
 			if (ret)
 				return -1;
+			ret = mwifiex_send_cmd(priv,
+					       HostCmd_CMD_802_11_PS_MODE_ENH,
+					       GET_PS, 0, NULL, false);
+			if (ret)
+				return -1;
 		}
 
 		if (drcs) {
-- 
2.29.2