diff --git a/root/etc/pulse/daemon_example.conf b/root/etc/pulse/daemon_example.conf
deleted file mode 100644
index b2e57e3a3..000000000
--- a/root/etc/pulse/daemon_example.conf
+++ /dev/null
@@ -1,86 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see .
-
-## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
-## more information. Default values are commented out. Use either ; or # for
-## commenting.
-
-; daemonize = no
-; fail = yes
-; allow-module-loading = yes
-; allow-exit = yes
-; use-pid-file = yes
-; system-instance = no
-; local-server-type = user
-; enable-shm = yes
-; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
-; lock-memory = no
-; cpu-limit = no
-
-; high-priority = yes
-; nice-level = -11
-
-; realtime-scheduling = yes
-; realtime-priority = 5
-
-; exit-idle-time = 20
-; scache-idle-time = 20
-
-; dl-search-path = (depends on architecture)
-
-; load-default-script-file = yes
-; default-script-file = /etc/pulse/default.pa
-
-; log-target = auto
-; log-level = notice
-; log-meta = no
-; log-time = no
-; log-backtrace = 0
-
-resample-method = speex-float-3
-; enable-remixing = yes
-; enable-lfe-remixing = yes
-; lfe-crossover-freq = 120
-
-flat-volumes = no
-
-; rlimit-fsize = -1
-; rlimit-data = -1
-; rlimit-stack = -1
-; rlimit-core = -1
-; rlimit-as = -1
-; rlimit-rss = -1
-; rlimit-nproc = -1
-; rlimit-nofile = 256
-; rlimit-memlock = -1
-; rlimit-locks = -1
-; rlimit-sigpending = -1
-; rlimit-msgqueue = -1
-; rlimit-nice = 31
-; rlimit-rtprio = 9
-; rlimit-rttime = 200000
-
-default-sample-format = s24le
-default-sample-rate = 44100
-; alternate-sample-rate = 48000
-; default-sample-channels = 2
-; default-channel-map = front-left,front-right
-
-; default-fragments = 4
-; default-fragment-size-msec = 25
-
-; enable-deferred-volume = yes
-; deferred-volume-safety-margin-usec = 1
-; deferred-volume-extra-delay-usec = 0
diff --git a/root/etc/pulse/default_example.pa b/root/etc/pulse/default_example.pa
deleted file mode 100644
index 9478d6615..000000000
--- a/root/etc/pulse/default_example.pa
+++ /dev/null
@@ -1,145 +0,0 @@
-#!/usr/bin/pulseaudio -nF
-#
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify it
-# under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see .
-
-# This startup script is used only if PulseAudio is started per-user
-# (i.e. not in system mode)
-
-.fail
-
-### Automatically restore the volume of streams and devices
-load-module module-device-restore
-load-module module-stream-restore
-load-module module-card-restore
-
-### Automatically augment property information from .desktop files
-### stored in /usr/share/application
-load-module module-augment-properties
-
-### Should be after module-*-restore but before module-*-detect
-load-module module-switch-on-port-available
-
-### Use hot-plugged devices like Bluetooth or USB automatically (LP: #1702794)
-.ifexists module-switch-on-connect.so
-load-module module-switch-on-connect
-.endif
-
-### Load audio drivers statically
-### (it's probably better to not load these drivers manually, but instead
-### use module-udev-detect -- see below -- for doing this automatically)
-#load-module module-alsa-sink
-#load-module module-alsa-source device=hw:1,0
-#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
-#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
-#load-module module-null-sink
-#load-module module-pipe-sink
-
-### Automatically load driver modules depending on the hardware available
-.ifexists module-udev-detect.so
-load-module module-udev-detect tsched=0
-.else
-### Use the static hardware detection module (for systems that lack udev support)
-load-module module-detect
-.endif
-
-### Automatically connect sink and source if JACK server is present
-.ifexists module-jackdbus-detect.so
-.nofail
-load-module module-jackdbus-detect channels=2
-.fail
-.endif
-
-### Automatically load driver modules for Bluetooth hardware
-.ifexists module-bluetooth-policy.so
-load-module module-bluetooth-policy
-.endif
-
-.ifexists module-bluetooth-discover.so
-load-module module-bluetooth-discover
-.endif
-
-### Load several protocols
-.ifexists module-esound-protocol-unix.so
-load-module module-esound-protocol-unix
-.endif
-load-module module-native-protocol-unix
-
-### Network access (may be configured with paprefs, so leave this commented
-### here if you plan to use paprefs)
-#load-module module-esound-protocol-tcp
-#load-module module-native-protocol-tcp
-#load-module module-zeroconf-publish
-
-### Load the RTP receiver module (also configured via paprefs, see above)
-#load-module module-rtp-recv
-
-### Load the RTP sender module (also configured via paprefs, see above)
-#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
-#load-module module-rtp-send source=rtp.monitor
-
-### Load additional modules from GConf settings. This can be configured with the paprefs tool.
-### Please keep in mind that the modules configured by paprefs might conflict with manually
-### loaded modules.
-.ifexists module-gconf.so
-.nofail
-load-module module-gconf
-.fail
-.endif
-
-### Automatically restore the default sink/source when changed by the user
-### during runtime
-### NOTE: This should be loaded as early as possible so that subsequent modules
-### that look up the default sink/source get the right value
-load-module module-default-device-restore
-
-### Automatically move streams to the default sink if the sink they are
-### connected to dies, similar for sources
-load-module module-rescue-streams
-
-### Make sure we always have a sink around, even if it is a null sink.
-load-module module-always-sink
-
-### Honour intended role device property
-load-module module-intended-roles
-
-### Automatically suspend sinks/sources that become idle for too long
-load-module module-suspend-on-idle
-
-### If autoexit on idle is enabled we want to make sure we only quit
-### when no local session needs us anymore.
-.ifexists module-console-kit.so
-load-module module-console-kit
-.endif
-.ifexists module-systemd-login.so
-load-module module-systemd-login
-.endif
-
-### Enable positioned event sounds
-load-module module-position-event-sounds
-
-### Cork music/video streams when a phone stream is active
-load-module module-role-cork
-
-### Modules to allow autoloading of filters (such as echo cancellation)
-### on demand. module-filter-heuristics tries to determine what filters
-### make sense, and module-filter-apply does the heavy-lifting of
-### loading modules and rerouting streams.
-load-module module-filter-heuristics
-load-module module-filter-apply
-
-### Make some devices default
-#set-default-sink output
-#set-default-source input