This patch fixes some include problems on aarch64. aarch64 is still
currently broken but this will get us back to the underlying problem
of FloatExtractor.
Add support for async transfers by using a separate kernel task to poll
a list of active async transfers on a set time interval, and invoke
their user-provided callback function when they are complete. Also add
support for the interrupt class of transfers, building off of this async
functionality.
We now have a seperately allocated structure for the bookkeeping
information in the QueueHead and TransferDescriptor UHCI strucutres.
This way, we can support 64-bit pointers in UHCI, fixing a problem where
32-bit pointers would truncate the upper 32-bits of the (virtual)
address of the descriptor, causing a crash.
Co-authored-by: b14ckcat <b14ckcat@protonmail.com>
Decompose the current monolithic USBD Pipe interface into several
subclasses, one for each pair of endpoint type & direction. This is to
make it more clear what data and functionality belongs to which Pipe
type, and prevent nonsensical things like trying to execute a control
transfer on a non-control pipe. This is important, because the Pipe
class is the interface by which USB device drivers will interact with
the HCD, so the clearer and more explicit this interface is the better.
Allocate DMA buffer pages for use within the USBD Pipe class, and allow
for the user to specify the size of this buffer, rounding up to the
next page boundary.
This class is intended to replace all IOAddress usages in the Kernel
codebase altogether. The idea is to ensure IO can be done in
arch-specific manner that is determined mostly in compile-time, but to
still be able to use most of the Kernel code in non-x86 builds. Specific
devices that rely on x86-specific IO instructions are already placed in
the Arch/x86 directory and are omitted for non-x86 builds.
The reason this works so well is the fact that x86 IO space acts in a
similar fashion to the traditional memory space being available in most
CPU architectures - the x86 IO space is essentially just an array of
bytes like the physical memory address space, but requires x86 IO
instructions to load and store data. Therefore, many devices allow host
software to interact with the hardware registers in both ways, with a
noticeable trend even in the modern x86 hardware to move away from the
old x86 IO space to exclusively using memory-mapped IO.
Therefore, the IOWindow class encapsulates both methods for x86 builds.
The idea is to allow PCI devices to be used in either way in x86 builds,
so when trying to map an IOWindow on a PCI BAR, the Kernel will try to
find the proper method being declared with the PCI BAR flags.
For old PCI hardware on non-x86 builds this might turn into a problem as
we can't use port mapped IO, so the Kernel will gracefully fail with
ENOTSUP error code if that's the case, as there's really nothing we can
do within such case.
For general IO, the read{8,16,32} and write{8,16,32} methods are
available as a convenient API for other places in the Kernel. There are
simply no direct 64-bit IO API methods yet, as it's not needed right now
and is not considered to be Arch-agnostic too - the x86 IO space doesn't
support generating 64 bit cycle on IO bus and instead requires two 2
32-bit accesses. If for whatever reason it appears to be necessary to do
IO in such manner, it could probably be added with some neat tricks to
do so. It is recommended to use Memory::TypedMapping struct if direct 64
bit IO is actually needed.
This device is supposed to be used in microvm and ISA-PC machine types,
and we assume that if we are able to probe for the QEMU BGA version of
0xB0C5, then we have an existing ISA Bochs VGA adapter to utilize.
To ensure we don't instantiate the driver for non isa-vga devices, we
try to ensure that PCI is disabled because hardware IO test probe failed
so we can be sure that we use this special handling code only in the
QEMU microvm and ISA-PC machine types. Unfortunately, this means that if
for some reason the isa-vga device is attached for the i440FX or Q35
machine types, we simply are not able to drive the device in such setups
at all.
To determine the amount of VRAM being available, we read VBE register at
offset 0xA. That register holds the amount of VRAM divided by 64K, so we
need to multiply the value in our code to use the actual VRAM size value
again.
The isa-vga device requires us to hardcode the framebuffer physical
address to 0xE0000000, and that address is not expected to change in the
future as many other projects rely on the isa-vga framebuffer to be
present at that physical memory address.
The AHCI code doesn't rely on x86 IO at all as it only uses memory
mapped IO so we can simply remove the header.
We also simply don't use x86 IO in the Intel graphics driver, so we can
simply remove the include of the x86 IO header there too.
Everything else was a bunch of stale includes to the x86 IO header and
are actually not necessary, so let's remove them to make it easier to
compile non-x86 Kernel builds.
It seems more correct to let each platform to define its own sequence of
initialization of the PCI bus, so let's remove the #if flags and just
put the entire Initializer.cpp file in the appropriate code directory.
The simple PCI::HostBridge class implements access to the PCI
configuration space by using x86 IO instructions. Therefore, it should
be put in the Arch/x86/PCI directory so it can be easily omitted for
non-x86 builds.
Many code patterns and hardware procedures rely on reliable delay in the
microseconds granularity, and since they are using such delays which are
valid cases, but should not rely on x86 specific code, we allow to
determine in compile time the proper platform-specific code to use to
invoke such delays.
Using the IO address space is only relevant for x86 machines, so let's
not compile instructions to access the PCI configuration space when we
don't target x86 platforms.
This reworks the way the UHCI schedule is set up to handle interrupt
transfers, creating 11 queue heads each assigned a different
period/latency, so that interrupt transfers can be linked into the
schedule with their specified period more easily.
Modifies the way the UHCI schedule is set up & modified to allow for
multiple transfers of the same type, from one or more devices, to be
queued up and handled simultaneously.
Until now, our kernel has reimplemented a number of AK classes to
provide automatic internal locking:
- RefPtr
- NonnullRefPtr
- WeakPtr
- Weakable
This patch renames the Kernel classes so that they can coexist with
the original AK classes:
- RefPtr => LockRefPtr
- NonnullRefPtr => NonnullLockRefPtr
- WeakPtr => LockWeakPtr
- Weakable => LockWeakable
The goal here is to eventually get rid of the Lock* classes in favor of
using external locking.
Instead of having two separate implementations of AK::RefCounted, one
for userspace and one for kernelspace, there is now RefCounted and
AtomicRefCounted.
All users which relied on the default constructor use a None lock rank
for now. This will make it easier to in the future remove LockRank and
actually annotate the ranks by searching for None.
Currently the SysFS node for USB devices is only initialized for USB
hubs, which means it will cause a kernel crash upon being dereferenced
in a non-hub device. This fixes the problem by making initialization
happen for all USB devices.
Right now the TD and QH descriptor pools look to be susceptible
to a race condition in the event they are accessed simultaneously
by separate threads making USB transfers. This fix does not seem to
add any noticeable overhead.
Each of these strings would previously rely on StringView's char const*
constructor overload, which would call __builtin_strlen on the string.
Since we now have operator ""sv, we can replace these with much simpler
versions. This opens the door to being able to remove
StringView(char const*).
No functional changes.
Currently when allocating buffers for USB transfers, it is done
once for every transfer rather than once upon creation of the
USB device. This commit changes that by moving allocation of buffers
to the USB Pipe class where they can be reused.
This change unifies the naming convention for kernel tasks.
The goal of this change is to:
- Make the task names more descriptive, so users can more
easily understand their purpose in System Monitor.
- Unify the naming convention so they are consistent.
This name was misleading, as it wasn't really "getting" anything. It has
hence been renamed to `enumerate_interfaces` to reflect what it's
actually doing.
This creates all interfaces when the device is enumerated, with a link
to the configuration that it is a part of. As such, a new class,
`USBInterface` has been introduced to express this state.
Some other parts of the USB stack may require us to perform a control
transfer. Instead of abusing `friend` to expose the default pipe, let's
just expose it via a function.
