With this device being added, we can now boot into graphics mode on
these platforms too. For ISA-PC machine this is basically the only
viable option to use, but in the future, we should remove this device
for the microvm machine type as it should allow us to determine better
options and detect them by using a given device tree blob.
This device is supposed to be used in microvm and ISA-PC machine types,
and we assume that if we are able to probe for the QEMU BGA version of
0xB0C5, then we have an existing ISA Bochs VGA adapter to utilize.
To ensure we don't instantiate the driver for non isa-vga devices, we
try to ensure that PCI is disabled because hardware IO test probe failed
so we can be sure that we use this special handling code only in the
QEMU microvm and ISA-PC machine types. Unfortunately, this means that if
for some reason the isa-vga device is attached for the i440FX or Q35
machine types, we simply are not able to drive the device in such setups
at all.
To determine the amount of VRAM being available, we read VBE register at
offset 0xA. That register holds the amount of VRAM divided by 64K, so we
need to multiply the value in our code to use the actual VRAM size value
again.
The isa-vga device requires us to hardcode the framebuffer physical
address to 0xE0000000, and that address is not expected to change in the
future as many other projects rely on the isa-vga framebuffer to be
present at that physical memory address.
We should aim to reliably determine if PCI hardware exists or not, and
we should consider the ACPI MCFG table in that test. Although it is
unusual to see an hardware setup where the PCI host bridge does not
respond to x86 IO instructions, it is expected to happen at least on the
QEMU microvm machine type as the host bridge only responds to memory
mapped IO requests. Therefore, we first test if ACPI is enabled, and we
try to use it to fetch the MCFG table. Later on we could also add FDT
parsing as part of the PCI IO test which would be useful for the QEMU
microvm machine type.
We use a ScopeGuard to ensure we always set a console of some sort if we
exit early from the initialization sequence in the GraphicsManagement
code. We do so to ensure we can boot into text mode console in an ISA-PC
machine type, because earlier we failed with an assertion due to not
setting any console for VirtualConsole to use.
ISA IDE controllers don't support Bus-master DMA as this feature is only
available for PCI IDE controllers. Therefore, don't try to use DMA mode
for such hardware.
The code in init.cpp is specific to the x86 initialization sequence, so
move it to the Arch/x86 directory in the same fashion like the aarch64
pattern.
The PIC and APIC code are specific to x86 platforms, so move them out of
the general Interrupts directory to Arch/x86/common/Interrupts directory
instead.
That code heavily relies on x86-specific instructions, and while other
CPU architectures and platforms can have PCI IDE controllers, currently
we don't support those, so this code is a special case which needs to be
in the Arch/x86 directory.
In the future it could be put back to the original place when we make it
more generic and suitable for other platforms.
The i8042 controller with its attached devices, the PS2 keyboard and
mouse, rely on x86-specific IO instructions to work. Therefore, move
them to the Arch/x86 directory to make it easier to omit the handling
code of these devices.
The ISA IDE controller code makes sense to be compiled in a x86 build as
it relies on access to the x86 IO space. For other architectures, we can
just omit the code as there's no way we can use that code again.
To ensure we can omit the code easily, we move it to the Arch/x86
directory.
The AHCI code doesn't rely on x86 IO at all as it only uses memory
mapped IO so we can simply remove the header.
We also simply don't use x86 IO in the Intel graphics driver, so we can
simply remove the include of the x86 IO header there too.
Everything else was a bunch of stale includes to the x86 IO header and
are actually not necessary, so let's remove them to make it easier to
compile non-x86 Kernel builds.
The VMWare backdoor handling code involves many x86-specific
instructions and therefore should be in the Arch/x86 directory. This
ensures we can easily omit the code in compile-time for non-x86 builds.
It seems more correct to let each platform to define its own sequence of
initialization of the PCI bus, so let's remove the #if flags and just
put the entire Initializer.cpp file in the appropriate code directory.
Only use the Bochs debug output if we compile a x86 build since bochs
debug output relies on x86 specific instructions.
We also remove the CONSOLE_OUT_TO_BOCHS_DEBUG_PORT flag as we always
compile bochs debug output for x86 builds and we always want to include
the bochs debug output capability as it is very handy and doesn't hurt
bare metal hardware or do any other problem besides taking a small
amount of CPU cycles.
The simple PCI::HostBridge class implements access to the PCI
configuration space by using x86 IO instructions. Therefore, it should
be put in the Arch/x86/PCI directory so it can be easily omitted for
non-x86 builds.
kprintf should not really care about the hardware-specific details of
each UART or serial port out there, so instead of using x86 specific
instructions, let's ensure that we will compile only the relevant code
for debug output for a targeted-specific platform.
The RTC and CMOS are currently only supported for x86 platforms and use
specific x86 instructions to produce only certain x86 plaform operations
and results, therefore, we move them to the Arch/x86 specific directory.
Many code patterns and hardware procedures rely on reliable delay in the
microseconds granularity, and since they are using such delays which are
valid cases, but should not rely on x86 specific code, we allow to
determine in compile time the proper platform-specific code to use to
invoke such delays.
We only use the RTC code in the Kernel, so it doesn't make sense to make
the RTC namespace outside of it. In addition to that, we will need later
on to use the RTC in an x86 specific manner and this will help us to use
this code in such fashion.
We move QEMU and VirtualBox shutdown sequences to a separate file, as
well as moving the i8042 reboot code sequence too to another file.
This allows us to abstract specific methods from the power state node
code of the SysFS filesystem, to allow other architectures to put their
methods there too in the future.
Using the IO address space is only relevant for x86 machines, so let's
not compile instructions to access the PCI configuration space when we
don't target x86 platforms.
Now when the user changes their preferred first day of the week in the
Calendar Settings, the Calendar application and applet views are update
accordingly without needing to restart them.
One edge case is left as a TODO() for now, since I'm not entirely sure
how to construct an element to those specifications.
With this patch, we can now run the Speedometer benchmark! :^)
We were dropping the base URL path components in the resulting URL due
to mistakenly determining the input URL to start with a Windows drive
letter. Fix this, add a spec link, and a test.
