Documentation: Add instructions for network booting

This commit is contained in:
Jean-Baptiste Boric 2021-01-25 18:14:03 +01:00 committed by Andreas Kling
parent ab14b0ac64
commit 59396ab1c6
Notes: sideshowbarker 2024-07-18 22:51:55 +09:00

View file

@ -0,0 +1,102 @@
## SerenityOS network booting
By network booting, this guide implies a target computer (physical or virtual) that tries to boot over the network through PXE. The setup presented here is also diskless, as the bootloader and the root file system are supplied over the network.
Note: it is recommended to boot a mainstream operating system through PXE on the target at least once before attempting this, if only to make sure that your setup works.
### General notes
This guide assumes several things:
- The TFTP server root is `/srv/tftp/`
- Bootloaders are located inside `/srv/tftp/boot/`
- SerenityOS artefacts are located inside `/srv/tftp/serenity/`:
- The kernel is located at `/srv/tftp/serenity/kernel`
- You can find it at `Build/Kernel/Kernel`
- The ramdisk is located at `/srv/tftp/serenity/ramdisk`
- You can use the QEMU image at `Build/_disk_image` as a ramdisk
### GRUB2
1. Install required packages on the TFTP server
- Debian: `apt install grub-pc-bin tftpd-hpa`
- Make sure `/srv/tftp/` is owned by the user `tftp`, otherwise the TFTP server won't serve files
2. Configure the DHCP server with the following options:
- Next server IP: `<static IP address of TFTP server>`
- Boot filename (for BIOS): `boot/grub/i386-pc/core.0`
3. Set up a GRUB2 netdir: `grub-mknetdir --net-directory=/srv/tftp -d /usr/lib/grub/i386-pc`
4. Put your `grub.cfg` configuration file inside `/srv/tftp/boot/grub/`
5. Place the SerenityOS kernel and ramdisk inside `/srv/tftp/boot/grub/serenity/`
Sample GRUB2 `grub.cfg` configuration file:
```
set gfxmode=auto
insmod all_video
insmod gfxterm
terminal_output gfxterm
menuentry 'SerenityOS - netboot diskless graphical mode' {
echo 'Loading kernel...'
multiboot (tftp)/serenity/kernel root=/dev/ramdisk0
echo 'Loading ramdisk...'
module (tftp)/serenity/ramdisk
echo 'Starting SerenityOS.'
}
menuentry 'SerenityOS - netboot diskless text mode' {
set gfxkeep=text
terminal_output console
echo 'Loading kernel...'
multiboot (tftp)/serenity/kernel root=/dev/ramdisk0 boot_mode=text
echo 'Loading ramdisk...'
module (tftp)/serenity/ramdisk
echo 'Starting SerenityOS.'
}
```
### PXELINUX
Warning: PXELINUX cannot set up a framebuffer for Multiboot targets, so you will most likely have no graphics on real hardware.
1. Install required packages on the TFTP server
- Debian: `apt install pxelinux tftpd-hpa`
- Make sure `/srv/tftp/` is owned by the user `tftp`, otherwise the TFTP server won't serve files
2. Configure the DHCP server with the following options:
- Next server IP: `<static IP address of TFTP server>`
- Boot filename (for BIOS): `boot/pxelinux/lpxelinux.0`
3. Place all the required bootloader modules (located inside `/usr/lib/PXELINUX/` and `/usr/lib/syslinux/modules/bios/` on Debian) inside `/srv/tftp/boot/pxelinux/`, which for the sample configuration file includes:
- lpxelinux.0
- ldlinux.c32
- vesamenu.c32
- libcom32.c32
- libutil.c32
- mboot.c32
4. Put your `default` configuration file inside `/srv/tftp/boot/pxelinux/pxelinux.cfg/`
5. Place the SerenityOS kernel and ramdisk inside `/srv/tftp/boot/grub/serenity/`
Sample PXELINUX `default` configuration file:
```
UI vesamenu.c32
LABEL SerenityOS
KERNEL mboot.c32
APPEND ../../serenity/kernel root=/dev/ramdisk0 --- ../../serenity/ramdisk
```
### Troubleshooting
- Issues with DHCP or TFTP usually require sniffing packets on the network to figure out.
- TFTP is a slow protocol, transferring the QEMU disk image (~ 200 MiB) will take some time. Consider setting up a FTP or HTTP server for faster downloading of SerenityOS artefacts if your bootloader supports it.
- Remember that SerenityOS has not been extensively tested on physical hardware.
- Virtual machines can also be booted over the network. Cheat notes for QEMU on Linux, assuming `br0` is already set up:
```
ip tuntap add tap0 mode tap user <username>
ip link set tap0 master br0
ip link set tap0 up
echo 0 > /proc/sys/net/bridge/bridge-nf-call-iptables
echo 0 > /sys/devices/virtual/net/br0/bridge/multicast_querier
qemu-system-i386 -m 4096 -netdev tap,ifname=tap0,script=no,downscript=no,id=network0 -device e1000,netdev=network0 -boot n -debugcon stdio -s
```