Select a Proxmox Helper

Always remember to use due diligence when sourcing scripts and automation tasks from third-party sites.

🔸
Proxmox VE 7 Post Install

Proxmox VE 7 Post Install

This script will give options to Disable the Enterprise Repo, Add/Correct PVE7 Sources, Enable the No-Subscription Repo, Add Test Repo and Disable Subscription Nag. Run the following in the Proxmox Shell. ⚠️ **PVE7 ONLY** ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/post-install-v3.sh)" ``` It's recommended to update Proxmox after running this script, before adding any VM/CT. ____________________________________________________________________________________________
Proxmox Kernel Clean

Proxmox Kernel Clean

Cleaning unused kernel images is not only good because of a reduced grub menu, but also gains some disk space. Run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/kernel-clean-v3.sh)" ``` ____________________________________________________________________________________________
Proxmox CPU Scaling Governor

Proxmox CPU Scaling Governor

CPU Scaling Governor enables the operating system to scale the CPU frequency up or down in order to save power or improve performance. [Generic Scaling Governors](https://www.kernel.org/doc/html/latest/admin-guide/pm/cpufreq.html?#generic-scaling-governors) Run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/scaling-governor.sh)" ``` ____________________________________________________________________________________________
Proxmox LXC Updater

Proxmox LXC Updater

Update All LXC's Fast & Easy Run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/update-lxcs.sh)" ``` ____________________________________________________________________________________________
Proxmox Dark Theme

Proxmox Discord Dark Theme

A dark theme for the Proxmox Web UI by [Weilbyte](https://github.com/Weilbyte/PVEDiscordDark) Run the following in the Proxmox Shell. ```yaml bash <(curl -s https://raw.githubusercontent.com/Weilbyte/PVEDiscordDark/master/PVEDiscordDark.sh ) install ``` To uninstall the theme, simply run the script with the `uninstall` command. ____________________________________________________________________________________________
Home Assistant OS VM

Home Assistant OS VM

Option to create VM using the Latest or Stable Image

To create a new Proxmox Home Assistant OS VM, run the following in the Proxmox Shell ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/vm/haos-vm-v3.sh)" ```

⚡ Default Settings: 4GB RAM - 32GB Storage - 2vCPU - Stable Image⚡

After the script completes, click on the VM, then on the **_Summary_** tab to find the VM IP. **Home Assistant Interface - IP:8123** ____________________________________________________________________________________________
Home Assistant Container LXC

Docker Logos | Docker @home-assistantGitHub - portainer/portainer-docs: Portainer documentation

Home Assistant Container LXC

To create a new Proxmox Home Assistant Container LXC, run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/homeassistant-v3.sh)" ```

⚡ Default Settings: 2GB RAM - 16GB Storage - 2vCPU ⚡

**Home Assistant Interface - IP:8123** **Portainer Interface - IP:9000** ⚙️ **Path to HA /config** ```yaml /var/lib/docker/volumes/hass_config/_data ``` ⚙️ **To Edit the HA configuration.yaml** (Recommend Using File Browser) Run in the LXC console ```yaml nano /var/lib/docker/volumes/hass_config/_data/configuration.yaml ``` Save and exit the editor with “Ctrl+O”, “Enter” and “Ctrl+X” ⚙️ **Copy Data From a Existing Home Assistant LXC to another Home Assistant LXC** Run in the Proxmox Shell ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/ha-copy-data.sh)" ``` ⚙️ **To Allow USB Device Passthrough:** Run in the Proxmox Shell. (**replace `106` with your LXC ID**) ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/usb-passthrough.sh)" -s 106 ``` Reboot the LXC to apply the changes ⚙️ **To Install HACS:** Run in the LXC console ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/hacs.sh)" ``` After install, reboot Home Assistant and **clear browser cache** then Add HACS integration. ⚙️ [**Update Menu**](https://raw.githubusercontent.com/tteck/Proxmox/main/misc/images/update-menu.png) Run in the LXC console ```yaml ./update ``` ____________________________________________________________________________________________
Podman Home Assistant Container LXC

@home-assistant

Podman Home Assistant Container LXC

To create a new Proxmox Podman Home Assistant Container LXC, run the following in the Proxmox Shell. ([What is Podman?](https://youtu.be/lkg5QJsoCCQ)) ⚠️ Podman seems to need a privileged LXC ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/podman-homeassistant-v3.sh)" ```

⚡ Default Settings: 2GB RAM - 16GB Storage - 2vCPU ⚡

**Home Assistant Interface - IP:8123** **Yacht Interface - IP:8000** ⚙️ **Path to HA /config** ```yaml /var/lib/containers/storage/volumes/hass_config/_data ``` ⚙️ **To edit the HA configuration.yaml** Run in the LXC console ```yaml nano /var/lib/containers/storage/volumes/hass_config/_data/configuration.yaml ``` Save and exit the editor with “Ctrl+O”, “Enter” and “Ctrl+X” ⚙️ **Copy Data From a Existing Home Assistant LXC to a Podman Home Assistant LXC** Run in the Proxmox Shell ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/ha-copy-data-podman.sh)" ``` ⚙️ **To allow USB device passthrough:** Run in the Proxmox Shell. (**replace `106` with your LXC ID**) ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/usb-passthrough.sh)" -s 106 ``` Reboot the LXC to apply the changes ⚙️ **To Install HACS:** Run in the LXC console ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/podman_hacs.sh)" ``` After install, reboot Home Assistant and **clear browser cache** then Add HACS integration. ⚙️ **Initial Yacht Login** **username** ```yaml admin@yacht.local ``` **password** ```yaml pass ``` ____________________________________________________________________________________________
ioBroker LXC

ioBroker LXC

[ioBroker](https://www.iobroker.net/#en/intro) is an open source automation platform. To create a new Proxmox ioBroker LXC, run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/iobroker-v3.sh)" ```

⚡ Default Settings: 2GB RAM - 8GB Storage - 2vCPU ⚡

**ioBroker Interface - IP:8081** ⚙️ **To Update ioBroker** ```yaml update from the ioBroker UI ``` ____________________________________________________________________________________________
Homebridge LXC

Homebridge LXC

Homebridge allows you to integrate with smart home devices that do not natively support HomeKit To create a new Proxmox Homebridge LXC, run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/homebridge-v3.sh)" ```

⚡ Default Settings: 1GB RAM - 4GB Storage - 1vCPU ⚡

**Homebridge Interface - IP:8581** ⚙️ **Initial Login** **username** ```yaml admin ``` **password** ```yaml admin ``` Config File Path `/var/lib/homebridge/config.json` Storage Path `/var/lib/homebridge` Restart Command `sudo hb-service restart` Stop Command `sudo hb-service stop` Start Command `sudo hb-service start` View Logs Command `sudo hb-service logs` Systemd Service File `/etc/systemd/system/homebridge.service` Systemd Env File `/etc/default/homebridge` ⚙️ **To Update Homebridge** ```yaml Update from the Homebridge UI ``` ___________________________________________________________________________________________
ESPHome LXC

ESPHome LXC

To create a new Proxmox ESPHome LXC, run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/esphome-v3.sh)" ```

⚡ Default Settings: 1GB RAM - 4GB Storage - 2vCPU ⚡

**ESPHome Interface - IP:6052** ⚙️ **To Update ESPHome** Run in the LXC console ```yaml pip3 install esphome --upgrade ``` ____________________________________________________________________________________________
Nginx Proxy Manager LXC

hero

Nginx Proxy Manager LXC

To create a new Proxmox Nginx Proxy Manager LXC Container, run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/nginx-proxy-manager-v3.sh)" ```

⚡ Default Settings: 1GB RAM - 3GB Storage - 1vCPU ⚡

____________________________________________________________________________________ Forward port `80` and `443` from your router to your Nginx Proxy Manager LXC IP. Add the following to your `configuration.yaml` in Home Assistant. ```yaml http: use_x_forwarded_for: true trusted_proxies: - 192.168.100.27 ###(Nginx Proxy Manager LXC IP)### ``` **Nginx Proxy Manager Interface - IP:81** ⚙️ **Initial Login** **username** ```yaml admin@example.com ``` **password** ```yaml changeme ``` ⚙️ **To Update Nginx Proxy Manager** Run in the LXC console ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/npm_update.sh)" ``` ____________________________________________________________________________________________
MQTT LXC

MQTT LXC

To create a new Proxmox MQTT LXC, run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/mqtt-v3.sh)" ```

⚡ Default Settings: 512MiB RAM - 2GB Storage - 1vCPU ⚡

Mosquitto comes with a password file generating utility called mosquitto_passwd. ```yaml sudo mosquitto_passwd -c /etc/mosquitto/passwd ``` Password: < password > Create a configuration file for Mosquitto pointing to the password file we have just created. ```yaml sudo nano /etc/mosquitto/conf.d/default.conf ``` This will open an empty file. Paste the following into it. ```yaml allow_anonymous false persistence true password_file /etc/mosquitto/passwd listener 1883 ``` Save and exit the text editor with "Ctrl+O", "Enter" and "Ctrl+X". Now restart Mosquitto server. ```yaml sudo systemctl restart mosquitto ``` ⚙️ **To Update MQTT:** Run in the LXC console ```yaml apt update && apt upgrade -y ``` ____________________________________________________________________________________________
Node-Red LXC

Node-Red LXC

To create a new Proxmox Node-RED LXC, run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/node-red-v3.sh)" ```

⚡ Default Settings: 1GB RAM - 4GB Storage - 1vCPU ⚡

**Node-Red Interface - IP:1880** ⚙️ **To Restart Node-Red:** Run in the LXC console ```yaml node-red-restart ``` ⚙️ **To Update Node-Red:** Run in the LXC console (Restart after update) ```yaml npm install -g --unsafe-perm node-red ``` ⚙️ **To Install Node-Red Themes** ⚠️ **Backup your flows before running this script!!** Run in the LXC console ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/node-red-themes.sh)" ``` ____________________________________________________________________________________________
Mariadb LXC

MariaDB

Mariadb LXC

To create a new Proxmox Mariadb LXC, run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/mariadb-v3.sh)" ```

⚡ Default Settings: 1GB RAM - 4GB Storage - 1vCPU ⚡

To enable MariaDB to listen to remote connections, you need to edit your defaults file. To do this, open the console in your MariaDB lxc: ```yaml nano /etc/mysql/my.cnf ``` Un-comment `port =3306` Save and exit the editor with "Ctrl+O", "Enter" and "Ctrl+X". ```yaml nano /etc/mysql/mariadb.conf.d/50-server.cnf ``` Comment `bind-address = 127.0.0.1` Save and exit the editor with "Ctrl+O", "Enter" and "Ctrl+X". For new MariaDB installations, the next step is to run the included security script. This script changes some of the less secure default options. We will use it to block remote root logins and to remove unused database users. Run the security script: ```yaml sudo mysql_secure_installation ``` Enter current password for root (enter for none): `enter` Switch to unix_socket authentication [Y/n] `y` Change the root password? [Y/n] `n` Remove anonymous users? [Y/n] `y` Disallow root login remotely? [Y/n] `y` Remove test database and access to it? [Y/n] `y` Reload privilege tables now? [Y/n] `y` We will create a new account called admin with the same capabilities as the root account, but configured for password authentication. ```yaml sudo mysql ``` Prompt will change to ```MariaDB [(none)]>``` Create a new local admin (Change the username and password to match your preferences) ```yaml CREATE USER 'admin'@'localhost' IDENTIFIED BY 'password'; ``` Give local admin root privileges (Change the username and password to match above) ```yaml GRANT ALL ON *.* TO 'admin'@'localhost' IDENTIFIED BY 'password' WITH GRANT OPTION; ``` Now, we'll give the user admin root privileges and password-based access that can connect from anywhere on your local area network (LAN), which has addresses in the subnet 192.168.100.0/24. This is an improvement because opening a MariaDB server up to the Internet and granting access to all hosts is bad practice.. Change the **_username_**, **_password_** and **_subnet_** to match your preferences: ```yaml GRANT ALL ON *.* TO 'admin'@'192.168.100.%' IDENTIFIED BY 'password' WITH GRANT OPTION; ``` Flush the privileges to ensure that they are saved and available in the current session: ```yaml FLUSH PRIVILEGES; ``` Following this, exit the MariaDB shell: ```yaml exit ``` Log in as the new database user you just created: ```yaml mysql -u admin -p ``` Create a new database: ```yaml CREATE DATABASE homeassistant; ``` Following this, exit the MariaDB shell: ```yaml exit ``` ⚠️ Reboot the lxc Checking status. ```yaml sudo systemctl status mariadb ``` Change the recorder: `db_url:` in your HA configuration.yaml Example: `mysql://admin:password@192.168.100.26:3306/homeassistant?charset=utf8mb4` ⚙️ **To Update Mariadb:** Run in the LXC console ```yaml apt update && apt upgrade -y ``` ⚙️ [**Adminer**](https://raw.githubusercontent.com/tteck/Proxmox/main/misc/images/adminer.png) (formerly phpMinAdmin) is a full-featured database management tool `http://your-mariadb-lxc-ip/adminer/` ____________________________________________________________________________________________
PostgreSQL LXC

PostgreSQL LXC

To create a new Proxmox PostgreSQL LXC, run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/postgresql-v3.sh)" ```

⚡ Default Settings: 1GB RAM - 4GB Storage - 1vCPU ⚡

To make sure our PostgreSQL is secured with a strong password, set a password for its system user and then change the default database admin user account Change user password ```yaml passwd postgres ``` Login using Postgres system account ```yaml su - postgres ``` Now, change the Admin database password ```yaml psql -c "ALTER USER postgres WITH PASSWORD 'your-password';" ``` Create a new user. ```yaml psql ``` ```yaml CREATE USER admin WITH PASSWORD 'your-password'; ``` Create a new database: ```yaml CREATE DATABASE homeassistant; ``` Grant all rights or privileges on created database to the user ```yaml GRANT ALL ON DATABASE homeassistant TO admin; ``` To exit psql ```yaml \q ``` Then type exit to get back to root Change the recorder: `db_url:` in your HA configuration.yaml Example: `db_url: postgresql://admin:your-password@192.168.100.20:5432/homeassistant?client_encoding=utf8` ⚙️ **To Update PostgreSQL** Run in the LXC console ```yaml apt update && apt upgrade -y ``` ⚙️ [**Adminer**](https://raw.githubusercontent.com/tteck/Proxmox/main/misc/images/adminer.png) (formerly phpMinAdmin) is a full-featured database management tool `http://your-PostgreSQL-lxc-ip/adminer/` ____________________________________________________________________________________________
Zigbee2MQTT LXC

Zigbee2MQTT LXC

To create a new Proxmox Zigbee2MQTT LXC, run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/zigbee2mqtt-v3.sh)" ```

⚡ Default Settings: 1GB RAM - 4GB Storage - 2vCPU ⚡

⚙️ **Determine the location of your adapter** Run in the LXC console ```yaml ls -l /dev/serial/by-id ``` Example Output: ```lrwxrwxrwx 1 root root 13 Jun 19 17:30 usb-1a86_USB_Serial-if00-port0 -> ../../ttyUSB0``` ⚙️ ⚠️ **Before you start Zigbee2MQTT you need to edit the [configuration.yaml](https://www.zigbee2mqtt.io/guide/configuration/)** Run in the LXC console ```yaml nano /opt/zigbee2mqtt/data/configuration.yaml ``` Save and exit the editor with “Ctrl+O”, “Enter” and “Ctrl+X” Example: ```yaml frontend: port: 9442 homeassistant: true permit_join: false mqtt: base_topic: zigbee2mqtt server: 'mqtt://192.168.86.224:1883' user: usr password: pwd keepalive: 60 reject_unauthorized: true version: 4 serial: port: /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0 #adapter: deconz #(uncomment for ConBee II) advanced: pan_id: GENERATE network_key: GENERATE channel: 20 ``` ⚙️ **Zigbee2MQTT can be started after completing the configuration** Run in the LXC console ```yaml cd /opt/zigbee2mqtt npm start ``` ⚙️ **To update Zigbee2MQTT** Run in the LXC console ```yaml cd /opt/zigbee2mqtt bash update.sh ``` ⚙️ **Copy Data From a Existing Zigbee2MQTT LXC to another Zigbee2MQTT LXC** Run in the Proxmox Shell ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/z2m-copy-data.sh)" ``` ____________________________________________________________________________________________
deCONZ LXC

deCONZ LXC

To create a new Proxmox deCONZ LXC, run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/deconz-v3.sh)" ```

⚡ Default Settings: 1GB RAM - 4GB Storage - 2vCPU ⚡

**deCONZ Interface - IP:80** ⚙️ **To Update deCONZ** Run in the LXC Console ```yaml apt update && apt upgrade -y ``` ____________________________________________________________________________________________
Zwavejs2MQTT LXC

Zwavejs2MQTT LXC

To create a new Proxmox Zwavejs2MQTT LXC, run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/zwavejs2mqtt-v3.sh)" ```

⚡ Default Settings: 1GB RAM - 4GB Storage - 2vCPU ⚡

**Zwavejs2MQTT Interface - IP:8091** ⚙️ **Copy Data From a Existing Zwavejs2MQTT LXC to another Zwavejs2MQTT LXC** Run in the Proxmox Shell ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/zwave-copy-data.sh)" ``` ⚙️ **To Update Zwavejs2MQTT** Run in the LXC Console ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/zwavejs2mqtt-update.sh)" ``` ____________________________________________________________________________________________
NocoDB LXC

NocoDB LXC

NocoDB is an open source #NoCode platform that turns any database into a smart spreadsheet. Airtable Alternative. To create a new Proxmox NocoDB LXC, run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/nocodb-v3.sh)" ```

⚡ Default Settings: 1GB RAM - 4GB Storage - 1vCPU ⚡

**NocoDB Interface - IP:8080/dashboard** ⚙️ **To Update NocoDB** Run in the LXC console ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/nocodb-update.sh)" ``` ____________________________________________________________________________________________
InfluxDB/Telegraf LXC

InfluxDB/Telegraf LXC

To create a new Proxmox InfluxDB LXC, run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/influxdb-v3.sh)" ```

⚡ Default Settings: 2GB RAM - 8GB Storage - 2vCPU ⚡

⚙️ **InfluxDB Configuration** Run in the LXC console ```yaml nano /etc/influxdb/influxdb.conf ``` ⚙️ **Telegraf Configuration** Run in the LXC console ```yaml nano /etc/telegraf/telegraf.conf ``` ⚙️ **To Update InfluxDB/Telegraf** Run in the LXC console ```yaml apt update && apt upgrade -y ``` ____________________________________________________________________________________________
Grafana LXC

Grafana LXC

To create a new Proxmox Grafana LXC, run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/grafana-v3.sh)" ```

⚡ Default Settings: 512MiB RAM - 2GB Storage - 1vCPU ⚡

**Grafana Interface - IP:3000** ⚙️ **Initial Login** **username** ```yaml admin ``` **password** ```yaml admin ``` ⚙️ **To Update Grafana** Run in the LXC console ```yaml apt update && apt upgrade -y ``` ____________________________________________________________________________________________
Docker LXC

Docker LXC

Options to Install Portainer and/or Docker Compose

To create a new Proxmox Docker LXC, run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/docker-v3.sh)" ```

⚡ Default Settings: 2GB RAM - 4GB Storage - 2vCPU ⚡

**Portainer Interface - IP:9000** ⚙️ **To Update** Run in the LXC console ```yaml apt update && apt upgrade -y ``` ____________________________________________________________________________________________
Debian 11 LXC

Debian

Debian 11 LXC

To create a new Proxmox Debian 11 (curl. sudo) LXC, run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/debian-v3.sh)" ```

⚡ Default Settings: 512MiB RAM - 2GB Storage - 1vCPU ⚡

⚙️ **To Update Debian 11** Run in the LXC console ```yaml apt update && apt upgrade -y ``` ____________________________________________________________________________________________
Ubuntu LXC

Ubuntu

Ubuntu LXC

Option to define version 18.04, 20.04, 21.10 or 22.04

To create a new Proxmox Ubuntu (curl. sudo) LXC, run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/ubuntu-v3.sh)" ```

⚡ Default Settings: 512MiB RAM - 2GB Storage - 1vCPU - 22.04 ⚡

⚙️ **To Update Ubuntu** Run in the LXC console ```yaml apt update && apt upgrade -y ``` ____________________________________________________________________________________________
UniFi Network Application LXC

UniFi Network Application LXC

With Local Controller Option

An application designed to optimize UniFi home and business networks with ease. To create a new Proxmox UniFi Network Application LXC, run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/unifi-v3.sh)" ```

⚡ Default Settings: 2GB RAM - 8GB Storage - 2vCPU ⚡

**UniFi Interface - https:// IP:8443** ⚙️ **To Update UniFi** Run in the LXC console ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/unifi-update.sh)" ``` ____________________________________________________________________________________________
Omada Controller LXC

Omada Controller LXC

Omada Controller is software which is used to manage the EAP To create a new Proxmox Omada Controller LXC, run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/omada-v3.sh)" ```

⚡ Default Settings: 2GB RAM - 8GB Storage - 2vCPU ⚡

**Omada Interface - https:// IP:8043** `tpeap status` show status of Omada Controller `tpeap start` start Omada Controller `tpeap stop` stop Omada Controller ⚙️ **To Update Omada** ```yaml Working On ``` ____________________________________________________________________________________________
MeshCentral LXC

MeshCentral LXC

MeshCentral is a full computer management web site. With MeshCentral, you can run your own web server to remotely manage and control computers on a local network or anywhere on the internet. To create a new Proxmox MeshCentral LXC, run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/meshcentral-v3.sh)" ```

⚡ Default Settings: 512MiB RAM - 2GB Storage - 1vCPU ⚡

**MeshCentral Interface - http:// IP** ⚙️ **To Update MeshCentral** ```yaml Update from the MeshCentral UI ``` ____________________________________________________________________________________________
Plex Media Server LXC

Plex Media Server LXC

With Hardware Acceleration Support

To create a new Proxmox Plex Media Server LXC, run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/plex-v3.sh)" ```

⚡ Default Settings: 2GB RAM - 8GB Storage - 2vCPU ⚡

**Plex Media Server Interface - IP:32400/web** ⚙️ **To Update Plex Media Server:** Run in the LXC console ```yaml apt update && apt upgrade -y ``` ⚙️ **Copy Data From a Existing Plex Media Server LXC to another Plex Media Server LXC** Run in the Proxmox Shell ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/pms-copy-data.sh)" ``` ____________________________________________________________________________________________
Jellyfin Media Server LXC

Jellyfin Media Server LXC

[TurnKey has a LXC CT for Jellyfin](https://www.turnkeylinux.org/mediaserver) To create a new Proxmox Jellyfin Media Server LXC, run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/jellyfin-v3.sh)" ```

⚡ Default Settings: 2GB RAM - 8GB Storage - 2vCPU ⚡

**Jellyfin Media Server Interface - IP:8096** ⚙️ **To Update Jellyfin Media Server** Run in the LXC console ```yaml apt update && apt upgrade -y ``` ____________________________________________________________________________________________
Pi-hole LXC

Pi-hole LXC

To create a new Proxmox Pi-hole LXC, run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/pihole-v3.sh)" ```

⚡ Default Settings: 512MiB RAM - 2GB Storage - 1vCPU ⚡

⚙️ **To set your password:** Run in the LXC console ```yaml pihole -a -p ``` ⚙️ **To Update Pi-hole:** ```yaml Update from the Pi-hole UI ``` ____________________________________________________________________________________________
Technitium DNS LXC

Technitium DNS LXC

An open source authoritative as well as recursive DNS server To create a new Proxmox Technitium DNS LXC, run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/technitiumdns-v3.sh)" ```

⚡ Default Settings: 512MiB RAM - 2GB Storage - 1vCPU ⚡

**Technitium DNS Interface - IP:5380** ⚙️ **To Update Technitium DNS** ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/technitiumdns-update.sh)" ``` __________________________________________________________________________________________
AdGuard Home LXC

AdGuard Home LXC

To create a new Proxmox AdGuard Home LXC, run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/adguard-v3.sh)" ```

⚡ Default Settings: 512MiB RAM - 2GB Storage - 1vCPU ⚡

**AdGuard Home Setup Interface - IP:3000 (After Setup use only IP)** (For the Home Assistant Integration, use port `80` not `3000`) ⚙️ **To Update Adguard** ```yaml Update from the Adguard UI ``` __________________________________________________________________________________________
Uptime Kuma LXC

Uptime Kuma LXC

Uptime Kuma is a self-hosted, open source, fancy uptime monitoring and alerting system. It can monitor HTTP(s) / TCP / HTTP(s) Keyword / Ping / DNS Record / Push / Steam Game Server. To create a new Proxmox Uptime Kuma LXC, run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/uptimekuma-v3.sh)" ```

⚡ Default Settings: 512MiB RAM - 2GB Storage - 1vCPU ⚡

**Uptime Kuma Interface - IP:3001** ⚙️ **To Update Uptime Kuma** Run in the LXC console ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/uptimekuma-update.sh)" ``` ____________________________________________________________________________________________
🔸Whoogle LXC

Whoogle LXC

Get Google search results, but without any ads, javascript, AMP links, cookies, or IP address tracking. To create a new Proxmox Whoogle LXC, run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/whoogle-v3.sh)" ```

⚡ Default Settings: 512MiB RAM - 2GB Storage - 1vCPU ⚡

**Whoogle Interface - IP:5000** ⚙️ **To Update Whoogle** Run in the LXC console ```yaml pip3 install whoogle-search --upgrade ``` ____________________________________________________________________________________________
Heimdall Dashboard LXC

Heimdall Dashboard LXC

[Heimdall Application Dashboard](https://camo.githubusercontent.com/bcfd4f74c93b25bea7b14eacbafd649206bf754a3d4b596329968f0ee569cf3c/68747470733a2f2f692e696d6775722e636f6d2f4d72433451704e2e676966) is a dashboard for all your web applications. It doesn't need to be limited to applications though, you can add links to anything you like. To create a new Proxmox Heimdall Dashboard LXC, run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/heimdalldashboard-v3.sh)" ```

⚡ Default Settings: 512MiB RAM - 2GB Storage - 1vCPU ⚡

**Heimdall Dashboard Interface - IP:7990** ⚙️ **To Update Heimdall Dashboard** Run in the LXC console ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/heimdalldashboard-all-update.sh)" ``` __________________________________________________________________________________________
Dashy LXC

Dashy LXC

Dashy helps you organize your self-hosted services by making them accessible from a single place To create a new Proxmox Dashy LXC, run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/dashy-v3.sh)" ```

⚡ Default Settings: 2GB RAM - 3GB Storage - 2vCPU ⚡

**Dashy Interface - IP:4000** After getting everything setup the way you want in interactive mode and saved to disk, you have to go into update configuration and rebuild application. ⚙️ **To Update Dashy** Run in the LXC Console ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/dashy-update.sh)" ``` __________________________________________________________________________________________
PhotoPrism LXC

PhotoPrism LXC

PhotoPrism® is an AI-powered app for browsing, organizing & sharing your photo collection. To create a new Proxmox PhotoPrism LXC, run the following in the Proxmox Shell. ``` bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/photoprism-v3.sh)" ```

⚡ Default Settings: 2GB RAM - 8GB Storage - 2vCPU ⚡

**PhotoPrism Interface - IP:2342** ⚙️ **Initial Login** **username** ```yaml admin ``` **password** ```yaml admin ``` [PhotoSync](https://www.photosync-app.com/home.html) ⚙️ **To Update PhotoPrism** Run in the LXC Console ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/photoprism-update.sh)" ``` ____________________________________________________________________________________________
Daemon Sync Server LXC

Daemon Sync Server LXC

Sync files from app to server, share photos & videos, back up your data and stay secure inside local network. To create a new Proxmox Daemon Sync Server LXC, run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/daemonsync-v3.sh)" ```

⚡ Default Settings: 512MiB RAM - 8GB Storage - 1vCPU ⚡

**Daemon Sync Server Interface - IP:8084** Search: `DAEMON Sync` in your favorite app store __________________________________________________________________________________________
MotionEye VMS LXC

MotionEye VMS LXC

To create a new Proxmox MotionEye VMS LXC, run the following in the Proxmox Shell. ``` bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/motioneye-v3.sh)" ```

⚡ Default Settings: 2GB RAM - 8GB Storage - 2vCPU ⚡

**MotionEye Interface - IP:8765** ⚙️ **Initial Login** **username** ```yaml admin ``` **password** ```yaml ``` ⚙️ **To Update MotionEye** Run in the LXC console ```yaml pip install motioneye --upgrade ``` ____________________________________________________________________________________________
File Browser

File Browser

To Install File Browser, ⚠️ run the following in the LXC console. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/filebrowser-v3.sh)" ``` [File Browser](https://filebrowser.org/features) is a create-your-own-cloud-kind of software where you can install it on a server, direct it to a path and then access your files through a nice web interface. Many available features! **File Browser Interface - http:// IP:8080** ⚙️ **Initial Login** **username** ```yaml admin ``` **password** ```yaml changeme ``` ⚙️ **To Update File Browser** ```yaml curl -fsSL https://raw.githubusercontent.com/filebrowser/get/master/get.sh | bash ``` ___________________________________________________________________________________________
Webmin System Administration

Webmin System Administration

To Install Webmin System Administration [(Screenshot)](https://raw.githubusercontent.com/tteck/Proxmox/main/misc/images/file-manager.png), ⚠️ run the following in the LXC console. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/webmin.sh)" ``` If you prefer to manage all aspects of your Proxmox LXC from a graphical interface instead of the command line interface, Webmin might be right for you. Benefits include automatic daily security updates, backup and restore, file manager with editor, web control panel, and preconfigured system monitoring with optional email alerts. **Webmin Interface - https:// IP:10000 (https)** ⚙️ **Initial Login** **username** ```yaml root ``` **password** ```yaml root ``` ⚙️ **To Update Webmin** ```yaml Update from the Webmin UI ``` ⚙️ **To Uninstall Webmin** Run in the LXC console ```yaml bash /etc/webmin/uninstall.sh ``` ___________________________________________________________________________________________
WireGuard LXC

WireGuard LXC

With WGDashboard

To create a new Proxmox WireGuard LXC, run the following in the Proxmox Shell. ``` bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/wireguard-v3.sh)" ```

⚡ Default Settings: 512MiB RAM - 2GB Storage - 1vCPU ⚡

**WGDashboard Interface - http:// IP:10086** ⚙️ **Initial Login** **username** ```yaml admin ``` **password** ```yaml admin ``` ⚙️ **Host Configuration** Run in the LXC console ```yaml nano /etc/pivpn/wireguard/setupVars.conf ``` ⚙️**Add Clients** Run in the LXC console ```yaml pivpn add ``` ⚙️ **To Update WireGuard** Run in the LXC console ```yaml apt update && apt upgrade -y ``` ____________________________________________________________________________________________
CrowdSec

CrowdSec

To Install CrowdSec, ⚠️ run the following in the LXC console. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/crowdsec-v3.sh)" ``` [CrowdSec](https://crowdsec.net/) is a free, open-source and collaborative IPS. Analyze behaviors, respond to attacks & share signals across the community. [**Control center for your CrowdSec machines.**](https://app.crowdsec.net/product-tour) ___________________________________________________________________________________________
Keycloak LXC

Keycloak LXC

To create a new Proxmox Keycloak LXC, run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/keycloak-v3.sh)" ``` [Keycloak](https://www.keycloak.org/) is an Open Source Identity and Access Management solution for modern Applications and Services. **Keycloak Interface - http:// IP:8080** (First start can take a few minutes) ⚙️ **Initial Login** The initial admin user can be added manually using the web frontend when accessed from localhost or automatically using environment variables. To add the initial admin user using environment variables, set `KEYCLOAK_ADMIN` for the initial admin username and `KEYCLOAK_ADMIN_PASSWORD` for the initial admin password. First, stop Keycloak ```yaml systemctl stop keycloak.service ``` then start Keycloak by coping & pasting the following (only needed once) ```yaml cd /opt/keycloak export KEYCLOAK_ADMIN=admin export KEYCLOAK_ADMIN_PASSWORD=changeme bin/kc.sh start-dev ``` ⚙️ **To Update Keycloak** ```yaml working On ``` ___________________________________________________________________________________________
Vaultwarden LXC

Vaultwarden LXC

Alternative implementation of the Bitwarden server API written in Rust and compatible with upstream [Bitwarden clients](https://bitwarden.com/download/), perfect for self-hosted deployment where running the official resource-heavy service might not be ideal. To create a new Proxmox Vaultwarden LXC, run the following in the Proxmox Shell. ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/vaultwarden-v3.sh)" ``` ⚠️ Vaultwarden needs to be behind a proxy (Nginx Proxy Manager) to obtain HTTPS and to allow clients to connect. The script builds from source, which takes time and resources. After the build, the script will automatically set resources to Normal Settings. Expect 30+ minute install time.

⚡ Normal Settings: 512Mib RAM - 6GB Storage - 1vCPU ⚡

**Vaultwarden Interface - IP:8000** ⚙️ **Path to Vaultwarden .env file** (to enable `ADMIN_TOKEN`) ```yaml /opt/vaultwarden/.env ``` ⚙️ **To Update Vaultwarden** Run in the LXC console ```yaml bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/vaultwarden-update.sh)" ``` ____________________________________________________________________________________________